Yukon Gear Front 4340 Chrome-Moly Replacement Axle Kit For 77-91 GM / Dana 60 w/ 35 Splines

Shop performance axles, axle shafts, CV axles, chromoly axles, 300M axles, axle kits, hubs, CV joints, and drivetrain components at Black Ops Auto Works. Find replacement and upgraded axle solutions for Trackhawk, Durango Hellcat, Charger, Challenger, Subaru WRX and STI, Honda, Nissan Skyline, GM trucks, Ford, Jeep, and off-road applications. Performance Axles and Axle Shafts Upgraded axle shafts support vehicles with increased horsepower, sticky tires, larger off-road tires, lockers, hard launches, and demanding track or trail use. Match the axle’s torque capacity to the complete drivetrain rather than selecting by horsepower alone. CV Axles and Front Axle Assemblies CV axles transfer power through changing suspension angles and must match the inner and outer spline counts, CV joint style, length, seal surface, hub connection, ABS provisions, and transmission or differential interface. Chromoly and 300M Axles Chromoly axle shafts provide a strong upgrade for many street, drag, truc...

Performance axles and axle components for high horsepower Mopar Hellcat and Trackhawk platforms, sport compact swaps, and classic muscle cars and trucks are stocked at Black Ops Auto Works. Shop upgraded CV axle shafts, axle seals, axle disconnect kits, and OE style replacement axles from DSS, USA Standard, Yukon Gear and Axle, and G Force for Jeep, Dodge, Honda, Subaru, Nissan, and classic GM truck platforms. Every axle is filterable by year, make, model, trim, and horsepower rating so the correct spline count, length, and CV joint configuration ships the first time. Black Ops Auto Works carries 276 axle and axle component SKUs across Mopar Hellcat and Trackhawk, JDM and sport compact swap platforms, and classic GM truck and passenger car applications. What This Collection Covers Axle shafts transmit engine and transmission torque from the differential to the wheels, and factory axles are engineered around factory horsepower and torque figures with limited safety margin for sig...

Find Chevrolet K30 parts with cab, bed and installed four-wheel-drive chassis identified. Work-truck accessories and cab protection should be measured around the actual body and control layout. Cab-Floor Fit Floor mats must clear the transmission tunnel, transfer-case controls and pedals. Compare retention and seat clearance with the installed interior. A related Blazer or universal floor piece does not establish custom pickup coverage. Use the exact manufacturer application or measured installation requirements. Bed Equipment and Chassis References Rack frames and toolbox brackets need compatible bed rails, hardware and clearance. A frame-only listing is one piece of the complete mounting plan. Record rear-wheel arrangement, axle and suspension changes for mechanical purchases. Match installed hubs, brakes and load requirements separately from bed-accessory coverage. Choose Your Part Identify cab, bed and rear-wheel arrangement. Measure floor and control clearance. Plan rack brack...

Explore Chevrolet K3500 parts around actual rear-wheel configuration, body trim and four-wheel-drive chassis. Dually guards and universal flaps need different mounting and clearance checks. Dually Guards or Universal Flaps Molded rear guards require the actual rear-fender shape and wheel arrangement. Confirm explicit dual- or single-rear-wheel coverage before comparing finish. Universal flaps need measured width, suitable attachment and required hardware. Check front and rear tire clearance separately through steering and suspension movement. Hood and Chassis Applications Hood protection needs exact front-end production, contour and mounting. Related Chevrolet SUV titles require documented truck cross-application. For wheels and chassis service, record hubs, axles, suspension and load requirements. Four-wheel-drive and rear-wheel arrangement are independent application details that must both be retained. Choose Your Part Identify production and rear-wheel arrangement. Match rear-fe...

Drivetrain parts for high-horsepower Mopar, truck, Jeep, and import platforms are stocked at Black Ops Auto Works. Shop differentials, axles, driveshafts, clutch kits, flywheels, flexplates, shifters, transmission components, ring and pinion gears, differential braces, and driveline hardware for Hellcat, Trackhawk, TRX, HEMI, LS, LT, Coyote, and turbocharged import platforms. Every drivetrain part is filterable by vehicle platform, drivetrain layout, transmission type, and power level so the correct part ships the first time. Black Ops Auto Works carries 4,765 drivetrain SKUs across differentials, axles, clutches, and transmission hardware. What This Category Covers The drivetrain transfers power from the engine to the wheels and includes the transmission, clutch, driveshafts, axles, differentials, ring and pinion gears, wheel hubs, wheel bearings, U-joints, shifters, mounts, and bushings. Upgrading these components improves power delivery, durability, and reliability under incr...

Compare GMC K35 wheels, steering and differential-service components with actual installed hubs and axles. Keep chassis and suspension changes with the selection request. Wheels, Friction and Steering Compare wheel pattern, bore, width, offset, load application and clearance with actual brakes and suspension. Match pad geometry before choosing friction compound. For stabilizers and shocks, identify the component, position and mounting required. A steering damper does not replace worn linkage or a suspension shock. Differential Setup and Bed Mounting For a GM 10.5-inch 14-bolt crush-sleeve eliminator, verify the actual axle and exact kit application. Installation still requires the specified bearing-preload setup; the kit is not a substitute for adjustment. Measure toolbox and bed-rail interfaces before choosing brackets. Compare dimensions and supplied contents with the complete mounting plan. Choose Your Part Record actual hubs, brakes and suspension. Compare full wheel and fricti...

Choose GMC K3500 fender, cab and floor protection using exact body and installed equipment. Dually rear mud guards have a specific application that should remain explicit. Dually and Wheel-Position Coverage Compare the listed dually rear mud guards with actual rear fenders, production and mounting. Do not transfer rear-body coverage to another configuration. Front guards require their own fender and wheel-position check. Review steps, liners and other equipment that may affect attachment. Cab Windows and Floor Layout Match extended-cab deflectors to actual doors and windows and compare mounting style. Hood protectors need exact hood profile and production coverage. For center-hump liners, preserve no-floor-shift restrictions and compare shifter and console layout. Review row coverage and supplied pieces before choosing interior protection. Choose Your Part Record exact cab and rear-wheel body configuration. Preserve dually and wheel-position requirements. Match actual hood and wind...

Find GMC V3500 fender, floor and bed protection by exact body and installed equipment. Preserve dually rear and floor-shift restrictions on the selected accessory. Dually and Body Coverage Match rear mud guards to actual rear-wheel body, fenders and production application. Dually coverage should not be transferred to a different rear configuration. Compare hood protectors and deflectors with exact hood, door and window profiles. Check mounting style and supplied piece count. Floor and Bed Interfaces For center-hump liners, identify shifter and console layout and preserve no-floor-shift exclusions. Review row coverage independently of exterior packages. Measure actual bed length and identify rails and installed equipment before selecting a cover. Compare exact body application, clamps, seals and operating-clearance requirements. Choose Your Part Record actual body and rear-wheel configuration. Preserve dually and floor-shift restrictions. Match hood and window profiles. Measure bed ...

Shop Yukon Gear & Axle ring and pinion gears, axle shafts, locking differentials, limited-slip differentials, and installation kits at Black Ops Auto Works. Explore drivetrain components for compatible trucks, Jeeps, SUVs, muscle cars, and custom axle builds. From rebuilding a worn differential to changing gear ratios or upgrading traction, choose parts that match your exact axle configuration and intended use. Yukon Ring and Pinion Gear Sets This collection includes ring and pinion sets for multiple Dana, Ford, GM, Chrysler, Toyota, and Nissan axle applications. Compare available ratios for your specific housing, along with standard or reverse-rotation requirements, carrier compatibility, and installation notes. Select a ratio around tire diameter, transmission gearing, engine operating range, and driving requirements. A ratio that suits a trail-focused build may not suit a highway-driven vehicle. For four-wheel-drive applications, confirm the correct front and rear ratio pairi...