The aFe 54-12852R Magnum FORCE Stage-2 intake supplies one Pro 5R filter, an XLPE tube and one-piece 18-gauge powder-coated heat shield for the exact 6.2L supercharged Hellcat applications below. The covered 2019+ MUA installation requires a factory plastic-line cut; a universal no-cut claim is not appropriate.
| Years | Make | Model | Requirements |
|---|---|---|---|
| 2017–2018 | Dodge | Challenger SRT Hellcat | 6.2L supercharged HEMI |
| 2017–2020 | Dodge | Charger SRT Hellcat | 6.2L supercharged HEMI |
| 2020–2023 | Dodge | Charger SRT Hellcat Widebody | 6.2L supercharged HEMI; Widebody required for later range |
54-12852R: The exact current page’s generic 2017–2023 Challenger/Charger headline is model-specific in the linked manual: Challenger Hellcat 2017–2018, Charger Hellcat 2017–2020 and Charger Hellcat Widebody 2020–2023. Later Charger years require the specified Widebody configuration. Challenger SRT Demon and SRT Hellcat Redeye are explicitly excluded by the exact page.
| Detail | Value |
|---|---|
| Manufacturer Part Number | 54-12852R |
| Filter | One 24-91068 Pro 5R; 7 in. flange, 6-3/4 in. height per exact page |
| Tube / shield | 05-12852B1 XLPE tube / 05-12802B2 powder-coated 18-gauge heat shield |
| Coupling | 05-01495 silicone bellows |
| Trim | 25 in. and 16.5 in. seal lengths; 12.5 in. edge trim |
| MUA hose | 05-01396; 20 in. length, 1/2 in. ID |
| Sensor | Original temperature sensor; supplied 03-50167 grommet and 05-01454 fitting |
| Emissions | The exact current page references CARB EO D-550-55 for some or all applications. Exact EO scope was unavailable for independent verification; match the actual year, engine and configuration rather than treating the whole generic headline range as certified. |
aFe Power develops application-specific intake, filtration, exhaust, cooling, tuning, suspension, drivetrain, and truck-performance components supported by product testing and documented installation requirements.
A Magnum FORCE Stage-2 Pro 5R intake with an XLPE tube and heat shield for the exact listed Hellcat applications.
Which filter is included?One 24-91068 Pro 5R filter. The Pro 5R and Pro DRY S versions have separate part numbers and are not two filters in one kit.
Does the 2017–2023 headline apply to both models?The exact current page’s generic 2017–2023 Challenger/Charger headline is model-specific in the linked manual: Challenger Hellcat 2017–2018, Charger Hellcat 2017–2020 and Charger Hellcat Widebody 2020–2023. Later Charger years require the specified Widebody configuration. Challenger SRT Demon and SRT Hellcat Redeye are explicitly excluded by the exact page.
Does 2019+ MUA installation require cutting?Yes. For the covered 2019+ configuration the exact manual directs slicing the factory plastic MUA line and replacing its connection with the supplied hose, elbow and clamps.
Is the factory breather elbow always reused?The 2017–2018 branch reuses the factory elbow/hose. Covered 2019+ uses the supplied MUA conversion arrangement; do not interchange those procedures.
Which sensor is transferred?The original temperature sensor is locked clockwise into the supplied fitting/grommet, with the fitting tab toward the small end of the tube.
Are rain shields included?No. The exact page lists separate pre-filter 28-10243 and shields 54-12808-B or 54-12808-C. The carbon-finish shield is ABS, not a real carbon intake.
Is every headline application CARB exempt?The exact current page references CARB EO D-550-55 for some or all applications. Exact EO scope was unavailable for independent verification; match the actual year, engine and configuration rather than treating the whole generic headline range as certified.
California Proposition 65 warning: this product can expose you to chemicals known to the State of California to cause cancer and reproductive harm.
Shop aFe POWER intake systems, replacement filters, exhaust components, BladeRunner cooling parts and CONTROL chassis accessories at Black Ops Auto Works. Compare Momentum GT, Track Series and Magnum FORCE intake applications alongside Pro DRY S and Pro 5R filter choices. Choose a complete upgrade or a service component for the system already on your car, truck or SUV.Choose Your aFe Intake and FilterMomentum GT, Track Series and Magnum FORCECompare the intake housing, tubing, filter arrangement and finish offered for your engine. The collection includes Momentum GT applications, selected carbon-fiber Track Series systems and Magnum FORCE configurations. Each package supplies its own combination of induction components, so choose the design for the installation you want.Pro DRY S or Pro 5R Filter MediaPro DRY S uses oil-free media and skips the re-oiling step during service. Pro 5R is an oiled filter option with a different maintenance procedure. Choose a media configuration aFe off...
View aFe Products
Shop performance air intake systems for your next engine-bay upgrade at Black Ops Auto Works. Compare complete cold-air intakes, short-ram layouts and enclosed systems from Legmaker, JLT, aFe, K&N, Injen and other listed manufacturers. Choose the intake character, packaging and filter-service approach that suit the vehicle and the way you use it.Complete Intakes or a Focused Component UpgradeA complete intake is the place to start when changing the filter, tubing and enclosure as a matched package. An individual airbox, intake tube, coupler or replacement filter can be a better purchase when the rest of the installed system is staying. Compare what the package supplies before choosing between the two routes.For a naturally aspirated, turbocharged or supercharged engine, the connection and sensor arrangement are part of the design. Choose the complete system for that application rather than combining a large tube and filter solely by appearance.Cold-Air, Short-Ram and Enclosed De...
View Air Intake Systems Products
Shop cold air intakes, short-ram systems, closed-airbox packages and intake tubes at Black Ops Auto Works. Compare Legmaker carbon-fiber layouts with aFe, K&N, Injen, AEM, JLT, CORSA, Volant and other listed options. Choose the filter location, inlet connection, service requirements and induction character that suit the vehicle and build.Choose the Intake LayoutA closed-airbox system encloses the filter and uses its specified air-feed arrangement. An open-element or short-ram layout places the filter differently and can change the audible induction character. A longer routed intake, a short-ram system and a factory-airbox tube replacement involve different installation scopes.Compare the actual filter position, heat-shield/enclosure design, retained ducts and access for maintenance. A cold-air label alone does not establish a lower inlet temperature in every driving condition or a fixed horsepower gain. Review manufacturer testing for the exact system and application.Legmaker HE...
View Cold Air Intakes Products
Shop Dodge Challenger parts for exhaust sound, intake projects, chassis work and everyday cabin care at Black Ops Auto Works. Compare engine-specific Borla and MBRP exhaust references, Legmaker, JLT and aFe intake choices, AAD arms and 3D MAXpider Kagu liners. Build around your exact generation, engine, drivetrain and trim.Exhaust Sound and Intake ChoicesCompare applicable Borla S-Type and MBRP systems by sound description, valves, material, connection points and tip arrangement. Intake references separately name V6, naturally aspirated HEMI and supercharged combinations. Match the engine, production range and current equipment before choosing a filter or housing design; review calibration requirements for the exact setup.AAD Arms and Drivetrain SupportChoose the chassis task before comparing AAD front upper, rear upper, toe and trailing/tension-arm references. They serve different suspension locations; compare adjustment needs, the joints being renewed and required alignment. A JXB...
View Dodge Challenger Parts and Accessories Products
Shop Dodge Challenger Hellcat parts for intake and exhaust projects, brake service, suspension work and body details at Black Ops Auto Works. Compare Legmaker, JLT and aFe intake references, Borla exhaust choices, DBA brake components and KW V4 coilovers. Confirm exact production and Hellcat, Redeye, Demon or Widebody configuration for each part.Supercharged Intake and Exhaust ProjectsStart with the supported Hellcat, Redeye or Demon induction arrangement and production range before comparing Legmaker, JLT, aFe or K&N intake packages. A replacement filter and a complete intake supply different installation scopes. For exhaust, compare Borla S-Type or ATAK references with the named CORSA valved/Xtreme packages around sound preference, valve handling and outlet design. The no-tip Borla references use the specified factory bezel/valance arrangement; they are not tip-included packages.Brake Service and Suspension ChoicesChoose the brake repair scope before ordering a DBA complete tw...
View Dodge Challenger SRT Hellcat Parts and Accessories Products
Shop Dodge Charger parts and accessories for intake projects, chassis work and exterior or engine-bay finishing at Black Ops Auto Works. Explore Legmaker intake choices, AAD suspension arms, engine-specific catch cans, differential braces and Charger body components. Build around the actual generation, engine and installed drivetrain.Intake Layouts for HEMI and Supercharged BuildsChoose the actual engine and induction arrangement before comparing Legmaker 5.7L/6.1L, 392 HEMI, Hellcat/Redeye or Whipple 3.0/3.8 references. They name different supported layouts. Compare pipe/filter arrangement, mounts and calibration needs for that combination. A throttle body, thermostat or pulley supplies a separate component and needs its own complete installation plan rather than being treated as part of every intake package.AAD Arms and Differential BracesChoose the suspension position and adjustment task before selecting AAD front upper, rear upper, toe or trailing/tension arms. Compare the joint...
View Dodge Charger Parts & Accessories Products
Shop Dodge Charger SRT Hellcat parts for intake projects, chassis work and exterior or engine-bay finishing at Black Ops Auto Works. Compare Legmaker and JLT intake references, engine-specific catch cans, AAD arms and Charger hood, splitter and diffuser choices. Select around actual production, body configuration and current modifications.Intake and Supercharged Engine ProjectsCompare intake packages around the actual supercharger and production range. The JLT late-Hellcat reference names 2021–2023 Charger coverage, while aFe early-Hellcat and Legmaker Hellcat/Redeye references have separate applications. Match inlet connection, filter and mounts before planning calibration or companion parts. Cometic blower-snout, plenum and left/right head-gasket references seal different interfaces; select the service location and measured assembly specification independently.Catch Cans and Chassis SupportChoose Billet Technology, CORSA or AAD separation packages by their supported engine connect...
View Dodge Charger SRT Hellcat Parts & Accessories Products
