Dodge Challenger Parts & Accessories

What This Collection Covers

The Dodge Challenger's E-body revival spans the 2008 to 2023 model run, from the base SXT and Pentastar V6 through the R/T 5.7L HEMI, Scat Pack 392, SRT Hellcat, Hellcat Redeye, and the limited run Demon and Demon 170. This collection brings together fitment verified parts for every trim, with the deepest coverage for the HEMI powered R/T, Scat Pack, and Hellcat platforms enthusiasts modify most.

Shared LX and LD Platform

The Challenger shares its LX/LD platform architecture with the Dodge Charger and Chrysler 300, so many drivetrain, suspension, and engine bay parts cross reference across all three, while body specific parts like hoods and bumpers remain Challenger unique.

HEMI Engine and Airflow Upgrades

Black Ops Auto Works stocks cold air intakes for 5.7L, 6.4L, and supercharged 6.2L HEMI applications, including Legmaker intake systems built specifically for Hellcat, Redeye, and Demon engine bays. Oil catch cans from Billet Technology and Corsa manage crankcase vapor on high output HEMI builds, while Mishimoto cooling components support sustained track use.

Supercharged Hellcat and Demon Coverage

Hellcat, Redeye, and Demon specific parts account for the supercharger's added heat and engine bay packaging, so always confirm supercharged fitment before ordering intake or cooling components.

Exhaust and Sound

Cat back exhaust systems from Borla, Corsa, and Flowmaster are among the most popular Challenger upgrades, unlocking a deeper exhaust tone and measurable rear wheel power gains on 5.7L and 6.4L HEMI builds. Borla's S-Type is a common choice for an aggressive idle without excess drone at highway speed, while Flowmaster's American Thunder delivers a traditional muscle car tone at a lower price point.

Header and Cat Back Combinations

Pairing a cat back exhaust with long tube headers and a cold air intake is a common combination for maximizing sound and power gains on naturally aspirated HEMI Challengers.

Suspension, Chassis and Drivetrain

Handling upgrades include Eibach and H&R lowering springs, billet front and rear upper control arms from AAD, differential braces and billet race braces from Per4mance Development, and driveshaft center support bearing carrier upgrades from JXB Performance. These parts sharpen cornering response and reduce drivetrain flex under hard acceleration without sacrificing daily drivability.

Launch and Track Support

Differential braces and control arm upgrades are popular on Scat Pack and Hellcat builds that see regular drag strip use, where reduced chassis flex improves launch consistency.

Braking Upgrades

Stainless steel brake line kits improve pedal feel and reduce fade under repeated hard stops, a common upgrade path for Challenger R/T, Scat Pack, and Hellcat owners doing track days. Front and rear stainless line kits are available separately or as a complete set.

Brake Package Notes

Hellcat and Redeye trims use larger factory brake packages than R/T and Scat Pack, so confirm brake line and caliper fitment against your specific trim before ordering.

Exterior and Carbon Fiber Styling

Exterior upgrades include carbon fiber radiator covers, vertical door conversion kits, window louvers, script door sill appliques, and Challenger style hoods with functional scoops. These parts suit owners building a show quality Challenger or adding a distinct visual signature to a street build.

Body Panel Fitment

Hoods, spoilers, and other body specific panels are designed for Challenger sheet metal and do not directly interchange with Charger or 300 body parts despite the shared platform underneath.

Top Dodge Challenger Brands

• Legmaker Intakes. Cold air intake systems for Hellcat, Redeye, and Demon HEMI engines
• Billet Technology. Oil catch cans for Hellcat and Demon crankcase management
• Borla. S-Type cat back exhaust systems for HEMI Challengers
• Corsa. Cat back exhaust systems and oil catch cans
• Flowmaster. American Thunder cat back exhaust systems
• Eibach. Pro-Kit lowering springs for improved stance and handling
• H&R. Lowering springs and sport suspension components
• AAD (All Angels Design). Billet front and rear upper control arms
• Per4mance Development. Differential braces and billet race braces
• JXB Performance. Driveshaft center support bearing carrier upgrades
• Mishimoto. Cooling system upgrades for high output HEMI builds
• Vertical Doors. Vertical door conversion kits
• Mopar Performance. Factory backed performance parts and accessories

How to Choose the Correct Dodge Challenger Part

• Confirm the exact year, make, model, and trim (SXT, GT, R/T, Scat Pack, SRT, Hellcat, Redeye, or Demon)
• Match the engine, since 3.6L Pentastar, 5.7L HEMI, 6.4L HEMI, and 6.2L supercharged applications use different intake and cooling parts
• Verify brake package before ordering brake lines or big brake kits, since Hellcat and Redeye use larger factory brakes
• Check exhaust system compatibility with factory or aftermarket headers before selecting a cat back
• Confirm wheel and tire clearance before installing lowering springs or coilovers
• Review control arm and differential brace installation notes, since some require alignment after install
• Verify supercharger specific fitment before ordering Hellcat, Redeye, or Demon intake and catch can parts
• Confirm driveshaft length and configuration before ordering center support bearing carriers
• Check whether a part is shared with Charger or 300 or is Challenger body specific
• Contact support if unsure about cross-platform fitment on the shared LX/LD chassis

Common Questions

What exhaust is best for the Dodge Challenger R/T 5.7L HEMI?

Borla's S-Type cat back is the most popular choice for the 5.7L HEMI, delivering a deep, aggressive tone at idle that opens up under throttle without excessive drone at highway speeds. Flowmaster's American Thunder is a budget friendly alternative with a more traditional muscle car sound.

Do Challenger parts fit the Dodge Charger?

Many drivetrain and engine bay parts cross over since both share the LX/LD platform and the same engine options. Cold air intakes, exhaust components, and many suspension parts have confirmed cross fitment, but body specific parts like hoods, bumpers, and quarter panels are unique to each car.

What is the difference between Hellcat and Redeye intake parts?

Hellcat and Hellcat Redeye share the same supercharged 6.2L HEMI architecture, and many intake and catch can parts fit both, though some kits are tuned or sized specifically for the higher output Redeye. Always confirm exact trim compatibility on the product page.

Will lowering springs affect ride quality on the Challenger?

Quality lowering springs from Eibach and H&R are engineered to sharpen handling and reduce body roll while keeping the ride comfortable enough for daily driving, though the exact feel varies with wheel and tire setup.

Do differential braces help with wheel hop?

Yes. Differential and chassis braces from Per4mance Development reduce drivetrain flex during hard launches, which helps control wheel hop and improves consistency on Scat Pack and Hellcat builds.

Are these parts DIY installable?

Many parts such as cold air intakes, lowering springs, and brake lines are DIY friendly for experienced enthusiasts. Control arm and differential brace installation may require a lift and alignment afterward.

Can I run a Demon specific intake on a standard Hellcat?

Not always. Demon and Demon 170 specific parts are engineered around unique supercharger and cooling hardware and may not be directly compatible with a standard Hellcat or Redeye engine bay. Confirm exact trim fitment before ordering.

What brake upgrades are recommended for track use?

Stainless steel brake line kits improve pedal feel and reduce fade under repeated hard stops, a common first upgrade before moving to larger rotors or a big brake kit for regular track day use.

Do carbon fiber hoods fit factory hinges and latches?

Most Challenger style hoods in this collection are designed to work with factory hinge and latch hardware, but always confirm fitment notes for your specific year and trim on the product page.

How do I get help matching parts to my specific Challenger build?

Contact Black Ops Auto Works support by phone, email, or live chat. Staff can help confirm fitment across SXT, GT, R/T, Scat Pack, SRT, Hellcat, Redeye, and Demon applications before you order.

Why Buy Dodge Challenger Parts from Black Ops Auto Works

Black Ops Auto Works stocks 610 Dodge Challenger SKUs across engine, exhaust, suspension, braking, and exterior styling categories with real fitment data, competitive pricing, and support from staff who build these vehicles themselves. Products are filterable by year, make, model, trim, engine, and drivetrain to confirm the correct application before ordering.

For focused shopping, browse our Mopar Parts & Accessories, Dodge Charger Parts & Accessories, Dodge Challenger SRT Hellcat Parts, Dodge Charger SRT Hellcat Parts, Coilovers, Cat Back Exhaust Systems, Cold Air Intakes, and Forced Induction.