Click to zoom in
The Diesel Exhaust Upgrade the Land Cruiser J300 Has Been Waiting For
The aFe Vulcan Series cat-back exhaust system 49-36064-B is engineered for the 2022 to 2026 Toyota Land Cruiser J300 powered by the V6-3.3L twin-turbo diesel. Built from mandrel-bent 304 stainless steel tubing, this system replaces the restrictive factory exhaust and delivers a deeper, more authoritative exhaust note while improving exhaust flow on your Land Cruiser. The 49-36064-B ships complete with all hardware for a bolt-on installation that requires no cutting or welding.
Key Features
- Mandrel-bent 304 stainless steel tubing for maximum flow and long-term durability
- 3-inch diameter tubing throughout for unrestricted exhaust flow
- Black powder-coated tip for an aggressive, blacked-out aesthetic
- Direct-fit OEM mounting points and connection points for clean installation
- High-flow muffler reduces backpressure without drone at highway speeds
- All hardware and gaskets included for a complete bolt-on install
- Part number 49-36064-B fits 2022, 2023, 2024, 2025, and 2026 Land Cruiser J300
Fitment
| Year Range | Make | Model |
|---|---|---|
| 2022-2026 | Toyota | Land Cruiser (J300) V6-3.3L (td) |
Specifications
| Detail | Value |
|---|---|
| Part Number | 49-36064-B |
| Brand | aFe POWER |
| Tubing Material | 304 Stainless Steel |
| Tubing Diameter | 3 inches |
| Tip Finish | Black Powder Coat |
| System Type | Cat-Back / Rear Exit |
| Fitment | 2022-2026 Toyota Land Cruiser J300 V6-3.3L (td) |
| UPC | Not available |
| MSRP | $1,105.00 |
What's Included
- 1x aFe Vulcan Series cat-back exhaust system (49-36064-B)
- Black powder-coated exhaust tip
- All mounting hardware and gaskets
- Installation instructions
About aFe POWER
aFe POWER is a California-based performance parts manufacturer specializing in high-flow air intake systems, exhaust systems, and suspension components. Every aFe product is engineered in-house, tested on actual vehicles, and backed by a limited lifetime warranty on most product lines.
Related Parts on Our Site
Frequently Asked Questions
What is the aFe 49-36064-B?The aFe 49-36064-B is a Vulcan Series 3-inch 304 stainless steel cat-back exhaust system designed specifically for the 2022 to 2026 Toyota Land Cruiser J300 with the V6-3.3L twin-turbo diesel engine. It replaces the factory exhaust from the catalytic converter back and installs without cutting or welding.
What years of Land Cruiser does 49-36064-B fit?The 49-36064-B fits the 2022, 2023, 2024, 2025, and 2026 Toyota Land Cruiser J300 with the V6-3.3L twin-turbo diesel. It does not fit the J250 Land Cruiser or any gasoline-powered Land Cruiser variant.
Will the 49-36064-B pass emissions inspection?This system is a cat-back design and retains the factory catalytic converter, so it should not affect emissions compliance in most states. California buyers should verify local regulations before purchase.
Does the 49-36064-B require any cutting or welding?No. The aFe 49-36064-B uses factory OEM mounting points and is a direct bolt-on replacement. No cutting, welding, or fabrication is required for a proper fit.
What material is the 49-36064-B made from?The tubing is mandrel-bent 304 stainless steel, which provides superior corrosion resistance, strength, and longevity compared to aluminized steel found in most OEM and budget exhaust systems.
Does the aFe Vulcan exhaust drone at highway speeds?aFe engineers the Vulcan Series with a high-flow muffler designed to deliver sound enhancement at lower RPMs and under acceleration while minimizing interior drone during highway cruising on the Land Cruiser J300.
Can I install the aFe 49-36064-B myself?Yes. The 49-36064-B is a direct-fit bolt-on system intended for installation by a competent DIY mechanic or exhaust shop. aFe includes all necessary hardware and detailed instructions in the box. A lift or jack stands are recommended for safe access.
What warranty does aFe offer on the 49-36064-B?aFe POWER backs the Vulcan Series exhaust with a limited lifetime warranty against defects in materials and workmanship when used in normal on-road service conditions.
Installation Steps
- Safely lift and support the vehicle on jack stands or a lift
- Allow the factory exhaust to cool completely before beginning work
- Loosen and remove the factory exhaust clamps and hangers from the cat-back section
- Lower the factory cat-back exhaust from the vehicle
- Position the aFe 49-36064-B Vulcan cat-back exhaust on the factory hangers
- Hand-tighten all clamps and hardware before fully torquing to spec
- Verify tip alignment and clearance before final tightening
- Lower vehicle and perform a brief idle test to check for leaks
WARNING: This product can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and reproductive harm. For more information go to www.P65Warnings.ca.gov.
aFe
aFe Power cold air intakes, air filters, and cat-back exhaust systems for trucks, SUVs, and performance cars are stocked at Black Ops Auto Works. Shop aFe Momentum GT intakes, Magnum FORCE intakes, Pro DRY S and Pro 5R filters, Takeda intakes and exhausts, Vulcan Series exhaust, Rock Basher axle-back systems, throttle body spacers, intercoolers, and diesel performance parts for RAM Cummins, GM Duramax, Ford Bronco, Toyota Tacoma, Jeep Gladiator, and Dodge Hellcat platforms. Every product is filterable by year, make, model, trim, engine, and drivetrain so the correct part ships the first time. Black Ops Auto Works carries 2778 aFe Power SKUs across intake, filtration, exhaust, cooling, and diesel performance categories. What This Brand Covers aFe Power, short for Advanced FLOW Engineering, builds airflow focused performance parts engineered around dyno testing and CFD analysis rather than generic universal fitment. The catalog spans cold air intake systems, replacement and reusab...
View aFe Products
Catback
A catback exhaust system replaces everything from the catalytic converter back, covering the mid pipe, muffler, and tailpipe section in one bolt on upgrade. This collection covers catback systems for trucks, Jeeps, muscle cars, imports, and performance SUVs, giving you a straightforward way to improve sound, exhaust flow, and rear end styling without touching the factory catalytic converters or front pipe. Catback systems are available in stainless steel and titanium construction, with dual rear exit, single exit, and quad tip configurations, and a range of sound levels from mild touring tone to aggressive track character. Whether you want a deeper daily driver sound or a full track ready exhaust note, you will find a matched system for your platform here. What This Category Covers This collection includes complete catback exhaust systems, cat-back kits, dual rear exit systems, axle back adjacent catback upgrades, stainless steel and titanium exhaust systems, and street, tourin...
View Catback Products
Exhaust Systems
Performance exhaust systems for cars, trucks, SUVs, and Jeeps are stocked at Black Ops Auto Works. Shop cat-back systems, axle-back systems, turbo-back systems, headers, downpipes, mid-pipes, mufflers, resonators, catalytic converters, exhaust tips, exhaust valve controllers, oxygen sensors, exhaust brakes, and motorcycle and powersports exhausts for Mustang, Camaro, Challenger, Corvette, Silverado, and Super Duty platforms. Every product is filterable by exhaust position, material, pipe diameter, and vehicle year, make, model, and trim so the correct fitment ships the first time. Black Ops Auto Works carries 7,441 exhaust SKUs across every position of the exhaust system. What This Category Covers Exhaust upgrades change sound, appearance, and in some cases power. Exhaust fitment depends on engine, drivetrain, and factory exit position, so confirm the exact platform before ordering any exhaust component. Exhaust Position Cat-back, axle-back, turbo-back, and header-back systems e...
View Exhaust Systems Products