Click to zoom in
Precision-Built Performance Suspension Upgrade for the 2006-2013 Chevrolet Corvette
The aFe Control suspension component 470-401002-B delivers improved handling, reduced body roll, or increased ground clearance depending on the application for the 2006-2013 Chevrolet Corvette. Built from aircraft-grade aluminum and engineered to OEM or better fitment standards, the 470-401002-B installs using factory mounting points with no cutting, welding, or permanent modification to the chassis. Every component is precision-machined and tested to withstand the thermal and mechanical loads of both daily commuting and performance driving, giving you a measurable improvement in handling character the moment you leave the driveway.
Key Features
- Material: aircraft-grade aluminum construction for strength and corrosion resistance
- Finish: black anodized for long-term durability
- Direct bolt-on using factory mounting points, no chassis modification required
- Precision-machined for consistent, repeatable fitment
- Improved handling balance, reduced body roll, and enhanced driver feel
- Compatible with factory wheel and tire sizes (verify clearance for larger setups)
- Backed by aFe Power limited manufacturer warranty
Fitment
| Year Range | Make | Model | Trim |
|---|---|---|---|
| 2006-2013 | Chevrolet | Corvette | Z06 |
| 2009-2013 | Chevrolet | Corvette | ZR1 |
| 2011 | Chevrolet | Corvette | Z06 Carbon |
Specifications
| Detail | Value |
|---|---|
| Part Number | 470-401002-B |
| Brand | aFe Power / aFe Control |
| Component Type | Suspension Component |
| Material | Aircraft-Grade Aluminum |
| Color | Black Anodized |
| Mounting | Direct bolt-on, OEM hardware |
| UPC | 802959000281 |
What's Included
- aFe Control suspension component (470-401002-B)
- All required mounting hardware
- Installation instructions
Frequently Asked Questions
Will this suspension component require an alignment after installation?Yes. Any suspension component that affects wheel geometry, including control arms, lowering springs, coilovers, and lift kits, requires a four-wheel alignment after installation. Driving on a significantly out-of-alignment vehicle accelerates tire wear and compromises handling safety.
Is this compatible with other suspension modifications I already have installed?In most cases, yes. However, with stacked suspension modifications, always verify component clearances and maximum travel ranges. If you are running a combination of lift, aftermarket wheels, and larger tires, consult an alignment specialist familiar with your platform before finalizing the build.
Does the Magnuson-Moss Warranty Act protect my powertrain warranty with this upgrade?Yes. Under the Magnuson-Moss Warranty Act, a dealer cannot void your vehicle warranty solely because you installed aftermarket suspension components. They must demonstrate a direct causal link between the suspension modification and any specific failure they are declining to cover.
How long does installation typically take?Installation time varies by component type. A strut brace or sway bar end link set can be completed in one to two hours. A full coilover or control arm replacement typically takes four to six hours in a properly equipped shop. Always factor in time for a post-installation alignment.
Can I install this at home or does it require a shop?Many of these components can be installed at home with standard hand tools and a floor jack and jack stands. Coilovers and control arms require spring compressors or a press for certain steps and benefit from a shop alignment lift. Evaluate your specific toolkit and comfort level before committing to a DIY install.
Will this affect my vehicle's ride quality for daily driving?Performance suspension upgrades are designed to improve handling precision. Sway bars, control arms, and strut braces stiffen lateral dynamics while leaving ride compliance largely intact. Coilovers and lowering springs will reduce ride height and typically firm the ride relative to factory. The trade-off between sport handling and daily comfort varies by product selection.
Is this product backed by a warranty?aFe Power provides a limited manufacturer warranty on all suspension products covering defects in materials and workmanship. Coverage does not include damage from improper installation, racing use, off-road impacts, or modification of the components. Contact aFe Power or us for full warranty details.
What if this kit doesn't fit my specific trim or submodel?Refer to the fitment table above for confirmed compatible year ranges and trim levels. If your specific configuration is not listed, contact us before purchasing. We can verify fitment details with aFe Power to ensure the correct part is ordered.
Installation Overview
- Safely raise and support the vehicle on a level surface using proper jack stands under the frame
- Remove the wheel for full access to the suspension mounting points if required by your specific component
- Take photographs of the factory orientation for all mounting hardware positions before disassembly
- Remove factory components in the reverse order of installation, keeping hardware organized
- Install the new 470-401002-B in the factory mounting positions, hand-threading all hardware first
- Confirm all components are properly seated and aligned before final torquing
- Torque all hardware to specification in the correct sequence as specified in the instructions
- Reinstall the wheel, lower the vehicle, and perform a visual inspection before driving
- Schedule a four-wheel alignment at a qualified shop before regular driving
WARNING: This product can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and reproductive harm. For more information go to www.P65Warnings.ca.gov.
aFe
aFe Power cold air intakes, air filters, and cat-back exhaust systems for trucks, SUVs, and performance cars are stocked at Black Ops Auto Works. Shop aFe Momentum GT intakes, Magnum FORCE intakes, Pro DRY S and Pro 5R filters, Takeda intakes and exhausts, Vulcan Series exhaust, Rock Basher axle-back systems, throttle body spacers, intercoolers, and diesel performance parts for RAM Cummins, GM Duramax, Ford Bronco, Toyota Tacoma, Jeep Gladiator, and Dodge Hellcat platforms. Every product is filterable by year, make, model, trim, engine, and drivetrain so the correct part ships the first time. Black Ops Auto Works carries 2778 aFe Power SKUs across intake, filtration, exhaust, cooling, and diesel performance categories. What This Brand Covers aFe Power, short for Advanced FLOW Engineering, builds airflow focused performance parts engineered around dyno testing and CFD analysis rather than generic universal fitment. The catalog spans cold air intake systems, replacement and reusab...
View aFe Products
Chevrolet Corvette Parts & Accessories
Chevrolet Corvette parts and accessories for every generation are stocked at Black Ops Auto Works. Shop cold air intakes, catch cans, oil separators, cat-back and axle-back exhaust systems, valve-back systems, X-pipes, brake pads, brake rotors, brake ducts, big brake kits, sway bars, coilovers, carbon fiber hoods, splitters, spoilers, mirrors, lighting, and drivetrain parts for C5, C6, C7, and C8 Corvettes, including Stingray, Grand Sport, Z06, ZR1, and Z51 trims. Every product is filterable by year, make, model, trim, engine, and drivetrain so the correct part ships the first time. Black Ops Auto Works carries 1,476 Chevrolet Corvette SKUs across intake, exhaust, brakes, suspension, exterior, and drivetrain categories. What This Collection Covers The Corvette has moved through four modern generations since the C5 launched in 1997, and each one uses different engine architecture, chassis design, and body construction. This collection groups parts confirmed to fit the specific Co...
View Chevrolet Corvette Parts & Accessories Products
Suspension
Suspension parts and complete kits for cars, trucks, SUVs, Jeeps, and off-road builds are stocked at Black Ops Auto Works. Shop coilovers, lowering springs, lift kits, leveling kits, shocks and struts, sway bars, control arms, tie rods, ball joints, bushings, chassis bracing, alignment hardware, air suspension, and complete stage kits from Bilstein, KW, Ohlins, Fox, KING, ICON, BC Racing, Silvers, Eibach, H&R, Swift Springs, Whiteline, Energy Suspension, Moog, SPC Performance, Rough Country, ReadyLIFT, BDS, Skyjacker, Air Lift, Firestone, and Black Ops Auto Works. Start with a matched shock and spring package or a full coilover kit, then layer in sway bars, chassis bracing, and camber adjustment hardware. Every part is filterable by year, make, model, trim, and drivetrain to confirm fitment before ordering. What This Category Covers Suspension is the highest-leverage handling upgrade on any vehicle. A properly matched shock, spring, and sway bar package produces measurable i...
View Suspension Products
Suspension Arms & Components
Suspension arms and components for Corvette, Miata, Porsche, Jeep Wrangler, Ford Bronco, Toyota 4Runner and FJ, Nissan 350Z, and classic GM A-Body and G-Body platforms are stocked at Black Ops Auto Works. Shop control arms, camber arms, traction arms, toe arms, tie rod ends, trailing arms, ball joints, and rod ends for street, track, and off-road builds. Every product is filterable by year, make, model, trim, engine, and drivetrain so the correct part ships the first time. Black Ops Auto Works carries 449 suspension arm SKUs across control arm, camber arm, traction arm, and rod end categories. What This Category Covers Suspension arms and components include the control arms, camber adjustment arms, traction bars, toe arms, tie rod assemblies, and trailing arms that define suspension geometry and connect the wheel hubs to the vehicle chassis. Quality suspension arm upgrades correct geometry on lowered or lifted vehicles and replace worn factory components to restore precise handl...
View Suspension Arms & Components Products