The aFe 54-12802 Magnum FORCE Stage-2 intake combines one Pro 5R filter, a molded plastic tube with an aluminum reinforcing sleeve and a one-piece powder-coated 18-gauge heat shield for 2015–2016 Challenger/Charger SRT Hellcat 6.2L supercharged applications. It is an open-element heat-shield intake, rather than the sealed Momentum housing or a carbon fiber system.
| Years | Make | Model | Engine |
|---|---|---|---|
| 2015–2016 | Dodge | Challenger / Charger SRT Hellcat | 6.2L supercharged HEMI V8 |
54-12802: the exact current page and shared manual both identify 2015–2016. Existing 2017 search rows are not supported by these exact sources and are not carried forward. The current page identifies the Challenger headlight inlet and Charger grille inlet separately; do not infer later Hellcat, Demon, Redeye or other-engine coverage.
| Detail | Value |
|---|---|
| Manufacturer Part Number | 54-12802 |
| Filter | One 24-91068 Pro 5R; 7 in. flange, 6-3/4 in. height per current exact page |
| Tube | 05-12802B1; molded plastic with aluminum reinforcing sleeve |
| Heat shield | 05-12802B2; one-piece powder-coated 18-gauge construction |
| Coupling | 05-01352 silicone; original supercharger breather fitting retained |
| Sensor | Original sensor called MAF in this exact manual; transferred using supplied slotted screws, called M4 in the installation step |
| Emissions | The current exact page describes this intake as 50-state legal under CARB EO D-550-19/22. Exact EO scope was unavailable for independent verification, so match the actual vehicle/engine and applicable EO rather than treating an existing emissions tag as certification. The manual requires the applicable EO label on or near the system. |
aFe Power develops application-specific intake, filtration, exhaust, cooling, tuning, suspension, drivetrain, and truck-performance components supported by product testing and documented installation requirements.
A Magnum FORCE Stage-2 intake with one Pro 5R filter, molded tube and one-piece heat shield for the listed 2015–2016 Hellcat vehicles.
Are both filter types included?No. This exact kit supplies one 24-91068 Pro 5R filter. The shared manual shows the alternate-media kit’s filter for reference.
Does it fit the 2017 Hellcat from the old search rows?The exact current page and manual identify 2015–2016 only. A separate later-kit application must be verified rather than extending this part from a related family.
Is the tube entirely aluminum?No. The manufacturer identifies a molded plastic tube with an aluminum sleeve pressed into its end for reinforcement.
Is the rain shield included?No. A compatible filter-mounted rain shield is a separate accessory with its own exact parent-intake compatibility.
Does this early kit require the later MUA line cut?No such step is specified in this early manual, and its exact page says no OEM cutting or drilling. Do not import the later 2019+ MUA-line procedure.
Which factory sensor and inlet are retained?Follow the exact manual’s sensor transfer, which it labels MAF, and its supplied-screw mounting. The Challenger and Charger retain different original inlet arrangements; the Charger grille duct remains in the car.
Is every emissions configuration certified?The current exact page describes this intake as 50-state legal under CARB EO D-550-19/22. Exact EO scope was unavailable for independent verification, so match the actual vehicle/engine and applicable EO rather than treating an existing emissions tag as certification. The manual requires the applicable EO label on or near the system.
California Proposition 65 warning: this product can expose you to chemicals known to the State of California to cause cancer and reproductive harm.
Shop aFe POWER intake systems, replacement filters, exhaust components, BladeRunner cooling parts and CONTROL chassis accessories at Black Ops Auto Works. Compare Momentum GT, Track Series and Magnum FORCE intake applications alongside Pro DRY S and Pro 5R filter choices. Choose a complete upgrade or a service component for the system already on your car, truck or SUV.Choose Your aFe Intake and FilterMomentum GT, Track Series and Magnum FORCECompare the intake housing, tubing, filter arrangement and finish offered for your engine. The collection includes Momentum GT applications, selected carbon-fiber Track Series systems and Magnum FORCE configurations. Each package supplies its own combination of induction components, so choose the design for the installation you want.Pro DRY S or Pro 5R Filter MediaPro DRY S uses oil-free media and skips the re-oiling step during service. Pro 5R is an oiled filter option with a different maintenance procedure. Choose a media configuration aFe off...
View aFe Products
Shop performance air intake systems for your next engine-bay upgrade at Black Ops Auto Works. Compare complete cold-air intakes, short-ram layouts and enclosed systems from Legmaker, JLT, aFe, K&N, Injen and other listed manufacturers. Choose the intake character, packaging and filter-service approach that suit the vehicle and the way you use it.Complete Intakes or a Focused Component UpgradeA complete intake is the place to start when changing the filter, tubing and enclosure as a matched package. An individual airbox, intake tube, coupler or replacement filter can be a better purchase when the rest of the installed system is staying. Compare what the package supplies before choosing between the two routes.For a naturally aspirated, turbocharged or supercharged engine, the connection and sensor arrangement are part of the design. Choose the complete system for that application rather than combining a large tube and filter solely by appearance.Cold-Air, Short-Ram and Enclosed De...
View Air Intake Systems Products
Shop cold air intakes, short-ram systems, closed-airbox packages and intake tubes at Black Ops Auto Works. Compare Legmaker carbon-fiber layouts with aFe, K&N, Injen, AEM, JLT, CORSA, Volant and other listed options. Choose the filter location, inlet connection, service requirements and induction character that suit the vehicle and build.Choose the Intake LayoutA closed-airbox system encloses the filter and uses its specified air-feed arrangement. An open-element or short-ram layout places the filter differently and can change the audible induction character. A longer routed intake, a short-ram system and a factory-airbox tube replacement involve different installation scopes.Compare the actual filter position, heat-shield/enclosure design, retained ducts and access for maintenance. A cold-air label alone does not establish a lower inlet temperature in every driving condition or a fixed horsepower gain. Review manufacturer testing for the exact system and application.Legmaker HE...
View Cold Air Intakes Products
Shop Dodge Challenger parts for exhaust sound, intake projects, chassis work and everyday cabin care at Black Ops Auto Works. Compare engine-specific Borla and MBRP exhaust references, Legmaker, JLT and aFe intake choices, AAD arms and 3D MAXpider Kagu liners. Build around your exact generation, engine, drivetrain and trim.Exhaust Sound and Intake ChoicesCompare applicable Borla S-Type and MBRP systems by sound description, valves, material, connection points and tip arrangement. Intake references separately name V6, naturally aspirated HEMI and supercharged combinations. Match the engine, production range and current equipment before choosing a filter or housing design; review calibration requirements for the exact setup.AAD Arms and Drivetrain SupportChoose the chassis task before comparing AAD front upper, rear upper, toe and trailing/tension-arm references. They serve different suspension locations; compare adjustment needs, the joints being renewed and required alignment. A JXB...
View Dodge Challenger Parts and Accessories Products
Shop Dodge Challenger Hellcat parts for intake and exhaust projects, brake service, suspension work and body details at Black Ops Auto Works. Compare Legmaker, JLT and aFe intake references, Borla exhaust choices, DBA brake components and KW V4 coilovers. Confirm exact production and Hellcat, Redeye, Demon or Widebody configuration for each part.Supercharged Intake and Exhaust ProjectsStart with the supported Hellcat, Redeye or Demon induction arrangement and production range before comparing Legmaker, JLT, aFe or K&N intake packages. A replacement filter and a complete intake supply different installation scopes. For exhaust, compare Borla S-Type or ATAK references with the named CORSA valved/Xtreme packages around sound preference, valve handling and outlet design. The no-tip Borla references use the specified factory bezel/valance arrangement; they are not tip-included packages.Brake Service and Suspension ChoicesChoose the brake repair scope before ordering a DBA complete tw...
View Dodge Challenger SRT Hellcat Parts and Accessories Products
Shop Dodge Charger parts and accessories for intake projects, chassis work and exterior or engine-bay finishing at Black Ops Auto Works. Explore Legmaker intake choices, AAD suspension arms, engine-specific catch cans, differential braces and Charger body components. Build around the actual generation, engine and installed drivetrain.Intake Layouts for HEMI and Supercharged BuildsChoose the actual engine and induction arrangement before comparing Legmaker 5.7L/6.1L, 392 HEMI, Hellcat/Redeye or Whipple 3.0/3.8 references. They name different supported layouts. Compare pipe/filter arrangement, mounts and calibration needs for that combination. A throttle body, thermostat or pulley supplies a separate component and needs its own complete installation plan rather than being treated as part of every intake package.AAD Arms and Differential BracesChoose the suspension position and adjustment task before selecting AAD front upper, rear upper, toe or trailing/tension arms. Compare the joint...
View Dodge Charger Parts & Accessories Products
Shop Dodge Charger SRT Hellcat parts for intake projects, chassis work and exterior or engine-bay finishing at Black Ops Auto Works. Compare Legmaker and JLT intake references, engine-specific catch cans, AAD arms and Charger hood, splitter and diffuser choices. Select around actual production, body configuration and current modifications.Intake and Supercharged Engine ProjectsCompare intake packages around the actual supercharger and production range. The JLT late-Hellcat reference names 2021–2023 Charger coverage, while aFe early-Hellcat and Legmaker Hellcat/Redeye references have separate applications. Match inlet connection, filter and mounts before planning calibration or companion parts. Cometic blower-snout, plenum and left/right head-gasket references seal different interfaces; select the service location and measured assembly specification independently.Catch Cans and Chassis SupportChoose Billet Technology, CORSA or AAD separation packages by their supported engine connect...
View Dodge Charger SRT Hellcat Parts & Accessories Products
