The AC-TL14CHCAM-OE-DRY is an Anderson Composites dry carbon trunk lid built specifically for the 2014-2015 Chevrolet Camaro, built with the same pre-preg autoclave process used in Formula 1, aerospace, and elite endurance motorsport, achieving up to 70% weight savings. Constructed from pre-preg 3K 2x2 twill carbon fiber, autoclave-cured via a pre-preg layup cured in an autoclave under extreme heat and pressure, this decklid installs using your factory hinge bolts and latch hardware with no modification required. Up to 70% weight savings over the OEM steel panel translates directly into improved front-to-rear balance and power-to-weight ratio, the kind of gain that costs nothing in drivability and pays back every time the car moves.
Key Features
Fitment
| Year Range | Make | Model | Trim |
|---|---|---|---|
| 2014-2015 | Chevrolet | Camaro | See title for trim details |
Specifications
| Detail | Value |
|---|---|
| Part Number | AC-TL14CHCAM-OE-DRY |
| Brand | Anderson Composites |
| Material | pre-preg 3K 2x2 twill carbon fiber, autoclave-cured |
| Construction | pre-preg layup cured in an autoclave under extreme heat and pressure |
| Surface Finish | matte dry carbon surface, resin pre-impregnated directly into the fiber structure, no additional clear coat required |
| Weight Savings | Up to 70% vs. OEM steel decklid |
| Mounting | Direct bolt-on, OEM hinge hardware |
What's Included
Brand Information
Anderson Composites manufactures application-specific carbon fiber, fiberglass, and composite exterior components for performance vehicles. Construction, finish, mounting, and vehicle compatibility remain manufacturer-part-number specific.
Related Parts
Frequently Asked Questions
Does the AC-TL14CHCAM-OE-DRY preserve factory trunk release and latch function?
Yes. The decklid is built around the OEM latch and release geometry. Factory power trunk release, key fob function, and interior handle all operate normally with this lid installed.
Can I mount a factory or aftermarket spoiler on this trunk lid?
Yes. Anderson Composites preserves factory spoiler mounting provisions. OEM spoilers transfer directly, and Anderson Composites' own carbon spoilers are designed to pair with this trunk lid for a fully coordinated rear setup.
What actual weight savings can I expect?
Anderson Composites dry carbon construction saves up to 70% over the factory steel panel. On most Camaro platforms the OEM steel decklid weighs between 20 and 40 pounds, so the reduction in high-mounted rear mass is meaningful for both handling balance and power-to-weight ratio.
Does this trunk lid work with my backup camera?
On vehicles where the backup camera is in the rear bumper or license plate area there is no conflict. On vehicles with a camera integrated into the factory trunk lid, verify the camera mounting location relative to the new lid before ordering.
Installation Instructions
WARNING: This product can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and reproductive harm. For more information go to www.P65Warnings.ca.gov.
Shop Anderson Composites hoods, fenders, decklids, splitters, spoilers, diffusers and exterior trim at Black Ops Auto Works. Compare carbon-fiber and fiberglass components by exact vehicle application, body configuration, finish and manufacturer part number. A similar appearance does not establish compatibility with another trim, bumper or body width. Hoods, Fenders and Replacement Panels Identify the exact hood or panel design, construction and finished surfaces before ordering. Single-sided and double-sided carbon construction differ, and a visible carbon finish is a different choice from a panel intended for paint. Check hinge and latch arrangements, hood-pin requirements, vent clearance, heat shielding and any factory components that must transfer. Compare stated weights for the exact part rather than assuming every composite panel offers the same reduction. Splitters, Spoilers, Diffusers and Trim Match front aero to the installed bumper and rear components to the exhaust layout...
View Anderson Composites Products
Chevrolet Camaro parts and accessories for every generation are stocked at Black Ops Auto Works. Shop cold air intakes, headers, cat-back exhaust systems, catch cans, brake pads, brake rotors, big brake kits, sway bars, springs, carbon fiber hoods, splitters, decklids, louvers, clutch kits, and carbon fiber driveshafts for the 4th Gen F-Body, 5th Gen, and 6th Gen Camaro, including SS, ZL1, LT1, and RS trims. Every product is filterable by year, make, model, trim, engine, and drivetrain so the correct part ships the first time. Black Ops Auto Works carries 1,570 Chevrolet Camaro SKUs across intake, exhaust, brakes, suspension, exterior, and drivetrain categories. What This Collection Covers The Camaro has run through four modern generations on the LS and LT engine families, plus the earlier F-Body cars shared with the Pontiac Firebird. This collection groups parts confirmed to fit the specific Camaro generation and trim so LS-swapped classics, LT1 6th Gen SS cars, and supercharge...
View Chevrolet Camaro Parts & Accessories Products
Shop exterior parts and accessories for cars, trucks, Jeeps, and SUVs at Black Ops Auto Works. Explore carbon-fiber hoods, front lips, splitters, spoilers, diffusers, fender flares, truck steps, bed accessories, and exterior trim. Whether you are updating a performance vehicle’s appearance or adding everyday utility to a pickup, choose components matched to your exact vehicle and existing equipment. Carbon-Fiber Hoods and Body Panels Explore Black Ops Auto Works hood designs and selected replacement panels for Jeep Grand Cherokee, Dodge Charger, Dodge Durango, Chrysler 300, and other listed applications. Featured designs include Demon, Sniper, Redeye, and CFR options for supported vehicle configurations. Compare the construction, finish, mounting requirements, and supplied components on each listing. A carbon-fiber appearance does not establish that every product uses the same material or manufacturing method. Browse our Black Ops Carbon Fiber collection for focused shopping. Front ...
View Exterior Parts & Accessories Products
Exterior styling parts and accessories for cars, trucks, and SUVs are stocked at Black Ops Auto Works. Shop spoilers, front splitters, rear diffusers, side skirts, body kits, carbon fiber hoods and trunks, fender flares, badges and emblems, mirror covers, chrome delete trim, and window vents for Jeep Grand Cherokee Trackhawk, Dodge Charger and Challenger, RAM TRX, Chevrolet Camaro and Corvette, and Hellcat and SRT platforms. Every product is filterable by year, make, model, trim, and body style so the correct part ships the first time. Black Ops Auto Works carries 2,389 exterior styling SKUs across aerodynamic, carbon fiber, and badge and trim categories. What This Collection Covers Exterior Styling groups together the parts that change the visual character and aerodynamics of a vehicle, from functional front splitters and rear diffusers to purely cosmetic badges and mirror covers. This collection combines Black Ops Auto Works in-house carbon fiber and fiberglass components with...
View Exterior Styling Products
Carbon fiber trunk lids, decklids, hatches, and rear trim change the rear profile of a street, show, or track build while reducing weight on many applications. Shop model-specific replacement trunk lids for Dodge Charger, Chevrolet Camaro, Honda Civic, Subaru WRX STI and BRZ, Toyota GR Supra, Corvette, and more. Black Ops Auto Works carries 147 trunk SKUs across carbon fiber, fiberglass, OEM-style, vented, and spoiler-integrated designs. Filter by year, make, model, body style, and power-trunk equipment to select the correct rear panel. What This Trunk Collection Covers This collection focuses on exterior trunk lids, rear decklids, hatch panels, and trunk garnishes rather than storage accessories. Parts range from OEM-style replacement panels to aggressive carbon fiber pieces with integrated spoilers and vents. Decklid, trunk lid, and hatch differences A decklid or trunk lid is the rear closure panel on a sedan or coupe. A hatch is the larger rear opening panel on a hatchback. F...
View Trunks Products
