Exterior Styling

What This Collection Covers

Exterior Styling groups together the parts that change the visual character and aerodynamics of a vehicle, from functional front splitters and rear diffusers to purely cosmetic badges and mirror covers. This collection combines Black Ops Auto Works in-house carbon fiber and fiberglass components with parts from Anderson Composites, Seibon Carbon, APR Performance, Exotic Innovations, and Rebadge Design Graphics.

Product Categories

Spoilers, front lips and splitters, rear diffusers, side skirts, body kits, fenders, fender flares, doors and door panels, trunks and tailgates, badges and emblems, mirror covers, chrome delete trim, exterior trim, window vents and window shades, vortex generators, and antennas.

Platforms Covered

Jeep Grand Cherokee (WK2 and WL) and Trackhawk, Dodge Charger and Challenger (LX and LD), RAM 1500 TRX, Chrysler 300, Chevrolet Camaro and Corvette, Ford Mustang, and other HEMI, Hellcat, and SRT platforms with an active exterior styling aftermarket.

Spoilers, Splitters, and Diffusers

Aerodynamic parts add front-axle downforce and reduce rear-end lift at highway and track speeds. Black Ops Auto Works CFR Edition rear spoilers, Track Demon carbon fiber front lips, and rear diffusers for the Jeep Grand Cherokee Trackhawk and SRT are built to match factory bumper geometry and OEM paint lines. APR Performance and Anderson Composites carbon fiber wings and front splitters serve Camaro, Corvette, and Charger builds sensitive to lift under hard braking.

Fitment Notes

Front lips, splitters, and diffusers are typically fiberglass or carbon fiber and require confirmation of the exact model year and bumper style before ordering, since panel dimensions differ between pre-facelift and post-facelift generations.

Body Kits, Side Skirts, and Fenders

Full body kits and individual side skirts, fenders, and fender flares reshape the lower body and wheel arch lines for a more aggressive stance. CFR Edition carbon fiber side skirts for the Jeep Grand Cherokee and similar kits for Charger and Challenger are designed to integrate with factory rocker panels without extensive trimming.

Carbon Fiber Hoods, Trunks, and Hatches

Carbon fiber hoods, trunk lids, and rear hatch replacements reduce weight at the extremities of the vehicle, improving polar moment of inertia and steering response. Anderson Composites and Seibon Carbon produce hoods for Charger, Challenger, and Camaro, while Black Ops Auto Works produces Demon, Sniper, Venom, and Paramedic style hoods and rear hatch replacements for the Jeep Grand Cherokee and Trackhawk.

Carbon Fiber Care

Carbon fiber exterior parts need UV-protective clear coat maintenance to prevent yellowing and loss of weave depth. A quality spray wax or ceramic coating applied every 6 to 12 months provides adequate UV protection, and paint protection film helps guard against stone chips without requiring reapplication of clear coat.

Badges, Emblems, and Chrome Delete

Rebadge Design Graphics produces machined aluminum and carbon fiber badges for grille, fender, trunk lid, and tailgate locations in Hellcat, SRT, Scat Pack, Trackhawk, and TRX variants. Exotic Innovations produces RAM TRX grille badges, tailgate letter sets, and TRX fender emblems in matte black and carbon finishes. Chrome delete kits and carbon fiber chrome replacement trim swap factory chrome accents for a blacked-out or carbon appearance.

Mirror Covers, Trim, and Window Accessories

Carbon fiber mirror covers for Dodge Charger and Chrysler 300, carbon fiber headlight covers and cruise control bezels for Jeep Grand Cherokee, and window vents and window shades round out the exterior trim category. These parts are typically direct bolt-on or adhesive-mount upgrades that do not require major disassembly.

Top Exterior Styling Brands

• Black Ops Auto Works. CFR Edition spoilers, front lips, side skirts, and carbon fiber hoods and hatches for Jeep Grand Cherokee and Trackhawk
• Anderson Composites. Carbon fiber hoods, trunks, and front lips for Charger, Challenger, and Camaro
• Seibon Carbon. Carbon fiber hoods and body panels for import and domestic platforms
• APR Performance. GT carbon fiber wings and front splitters for track-inspired builds
• Exotic Innovations. RAM TRX and Trackhawk grille badges and tailgate letter sets
• Rebadge Design Graphics. Custom badges and emblems for Hellcat, SRT, and Scat Pack trims
• Track Demon. Carbon fiber front lip splitters for Jeep Grand Cherokee SRT and Trackhawk

How to Choose the Correct Exterior Styling Part

• Confirm the exact year, make, model, and trim
• Verify the body style and bumper generation (pre-facelift versus post-facelift)
• Confirm material (carbon fiber, fiberglass, or ABS plastic) and finish options
• Check whether the part is a direct bolt-on or requires trimming or adhesive mounting
• Confirm paint-to-match requirements for body kits, splitters, and side skirts
• Verify compatibility with existing aftermarket parts (spoilers with wing-delete trunks, splitters with aftermarket bumpers)
• Review installation notes for carbon fiber and fiberglass components before ordering
• Plan for professional installation on body kits, hoods, and structural trim replacements
• Confirm badge and emblem placement and adhesive versus bolt-on mounting
• Read the complete fitment notes and manufacturer application list before ordering

Common Questions

Do carbon fiber body parts require any special care?

Carbon fiber exterior parts require UV-protective clear coat maintenance to prevent the resin from yellowing and the weave from losing its depth over time. A quality spray wax or ceramic coating applied every 6 to 12 months provides adequate UV protection in high-sun climates. Minor clear coat scratches can be polished out with a light compound, though aggressive compound use should be avoided to prevent dulling the weave.

What exterior styling parts fit the Dodge Charger?

The Dodge Charger has a deep exterior styling aftermarket. Anderson Composites produces carbon fiber hoods, trunks, front lips, and rear diffusers specific to the LX and LD chassis, and Black Ops Auto Works produces custom front lips and rear diffusers matched to factory bumper geometry. Rebadge Design Graphics produces SRT, Hellcat, and Scat Pack badge sets, and Exotic Innovations provides carbon fiber mirror covers and interior trim.

What is the difference between a front splitter and a front lip?

The terms are often used interchangeably, but a front lip generally refers to a smaller extension of the factory bumper, while a splitter is a flatter, wider panel designed to generate front-axle downforce at speed. Both require confirmation of the exact bumper style before ordering.

Do body kits require paint?

Most fiberglass and ABS body kit components ship in gel coat or primer and require paint to match the factory color. Carbon fiber components are typically finished with a clear coat and are not painted, preserving the visible weave.

Will a rear spoiler or wing affect trunk function?

Most bolt-on spoilers and wings for platforms like the Jeep Grand Cherokee and Dodge Charger are designed to preserve full trunk or hatch function. Confirm the mounting method (drilled versus adhesive) before ordering.

Can I install carbon fiber hoods myself?

Carbon fiber hood installation is similar to a factory hood swap and can be done with basic tools, but proper alignment of panel gaps and hood latch mechanisms is easier with a second person and a lift. Professional installation is recommended for first-time installers.

Are badges and emblems vehicle-specific?

Yes. Badges and emblems are shaped and sized for specific factory mounting locations such as the grille, fender, trunk lid, or tailgate, and are not universal across different vehicle models even within the same brand family.

What is a chrome delete kit?

A chrome delete kit replaces factory chrome trim pieces such as window surrounds, door handles, and grille accents with matte black, gloss black, or carbon fiber finish pieces for a blacked-out appearance without permanent modification.

Do side skirts require trimming to install?

Most vehicle-specific side skirts and rocker panel extensions are designed to bolt or clip directly to factory mounting points. Universal or semi-universal kits may require trimming and test fitting before final installation.

How do I protect carbon fiber parts from stone chips?

Paint protection film applied over the clear coat on the leading edges of splitters, hoods, and front lips helps guard against stone chips and road debris without requiring reapplication of clear coat or repainting.

Why Buy Exterior Styling Parts from Black Ops Auto Works

Black Ops Auto Works stocks 2,389 exterior styling SKUs across Jeep Grand Cherokee, Trackhawk, Dodge Charger, Challenger, RAM TRX, and Chevrolet Camaro and Corvette platforms with real fitment data, competitive pricing, and support from staff who build these vehicles themselves. Black Ops Auto Works also manufactures CFR Edition spoilers, front lips, side skirts, and carbon fiber hoods and hatches in-house for the Jeep Grand Cherokee and Trackhawk platforms.

For focused shopping, browse our carbon fiber parts, exterior parts and accessories, Mopar parts, Jeep Trackhawk parts, Dodge Charger Hellcat parts, Exotic Innovations, and Black Ops Auto Works in-house parts.