-10%
Click to zoom in
The AC-FFI14CHC7-OE carbon fiber fender for the 2014-2019 Chevrolet Corvette Stingray is precision-engineered from 3K 2x2 twill carbon fiber using a vacuum-infused wet layup, delivering the iconic carbon weave with up to 50% weight savings over the factory steel panel. Fenders are among the most visible body panels on any vehicle, and this replacement delivers up to 50% weight savings over the factory steel unit while maintaining the OEM mounting points and body line accuracy for a true bolt-on installation. Whether the goal is weight reduction, clean carbon aesthetics, or preparation for a wider track build, the AC-FFI14CHC7-OE executes without compromise.
Key Features
- Material: 3K 2x2 twill carbon fiber, vacuum-infused wet layup.
- Weight savings: up to 50% vs. OEM steel fender.
- Finish: marine-grade gel coat with UV inhibitors, hand-polished to a gloss finish.
- Direct bolt-on using OEM mounting points, no drilling or cutting required.
- Anderson Composites carbon fiber fender (AC-FFI14CHC7-OE).
- Compatible with OEM fender liner and wheel arch components.
Fitment
| Year Range | Make | Model | Trim |
|---|---|---|---|
| 2014-2019 | Chevrolet | Corvette | Stingray |
Specifications
| Detail | Value |
|---|---|
| Part Number | AC-FFI14CHC7-OE |
| Brand | Anderson Composites |
| Material | 3K 2x2 twill carbon fiber |
| Construction | vacuum-infused wet layup |
| Surface Finish | marine-grade gel coat with UV inhibitors, hand-polished to a gloss finish |
| Weight Savings | Up to 50% vs. OEM steel fender |
| Mounting | Direct bolt-on, OEM mounting points |
What's Included
- Anderson Composites carbon fiber fender (AC-FFI14CHC7-OE)
- OEM mounting hardware not included, reuses factory bolts and clips
Brand Information
Anderson Composites manufactures application-specific carbon fiber, fiberglass, and composite exterior components for performance vehicles. Construction, finish, mounting, and vehicle compatibility remain manufacturer-part-number specific.
Related Parts
Frequently Asked Questions
Does this fender require any drilling or cutting to install?
No. The AC-FFI14CHC7-OE is precision-molded for exact OEM fitment and uses the existing mounting holes and factory bolt pattern. Minor gap adjustments are normal, but no new holes or structural modifications are required.
Is the OEM fender liner compatible with this carbon fender?
Yes. The inner mounting structure accommodates the factory fender liner and wheel arch trim. If modifications are needed for liner clip locations, minor adjustment with a small drill or file is typically sufficient.
Can this fender be painted?
Yes. The gel coat surface accepts standard automotive paint. Prep with a flexible composite primer, apply basecoat, and finish with 2K clear coat for a factory color match.
What weight savings does this deliver over the factory steel fender?
Anderson Composites carbon fiber construction achieves up to 50% weight savings versus the OEM steel unit. Unsprung front weight directly affects steering response, turn-in, and suspension feel, the improvement is noticeable, especially at track speeds.
Installation Instructions
- Remove the fender liner to access the inner mounting bolts
- Disconnect the side marker lamp wiring harness if present
- Remove all OEM fender mounting bolts, typically at the wheel arch, firewall, and along the hood edge
- Lift the factory fender away from the vehicle carefully
- Test-fit the AC-FFI14CHC7-OE on the mounting points before installing any bolts
- Start all bolts by hand to allow position adjustment before tightening
- Set gaps against the hood and door to match OEM spacing, then tighten all bolts
- Reinstall fender liner, side marker lamp, and any removed trim pieces
WARNING: This product can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and reproductive harm. For more information go to www.P65Warnings.ca.gov.
Anderson Composites
Shop Anderson Composites hoods, fenders, decklids, splitters, spoilers, diffusers and exterior trim at Black Ops Auto Works. Compare carbon-fiber and fiberglass components by exact vehicle application, body configuration, finish and manufacturer part number. A similar appearance does not establish compatibility with another trim, bumper or body width. Hoods, Fenders and Replacement Panels Identify the exact hood or panel design, construction and finished surfaces before ordering. Single-sided and double-sided carbon construction differ, and a visible carbon finish is a different choice from a panel intended for paint. Check hinge and latch arrangements, hood-pin requirements, vent clearance, heat shielding and any factory components that must transfer. Compare stated weights for the exact part rather than assuming every composite panel offers the same reduction. Splitters, Spoilers, Diffusers and Trim Match front aero to the installed bumper and rear components to the exhaust layout...
View Anderson Composites Products
Chevrolet Corvette Parts & Accessories
Chevrolet Corvette parts and accessories for every generation are stocked at Black Ops Auto Works. Shop cold air intakes, catch cans, oil separators, cat-back and axle-back exhaust systems, valve-back systems, X-pipes, brake pads, brake rotors, brake ducts, big brake kits, sway bars, coilovers, carbon fiber hoods, splitters, spoilers, mirrors, lighting, and drivetrain parts for C5, C6, C7, and C8 Corvettes, including Stingray, Grand Sport, Z06, ZR1, and Z51 trims. Every product is filterable by year, make, model, trim, engine, and drivetrain so the correct part ships the first time. Black Ops Auto Works carries 1,476 Chevrolet Corvette SKUs across intake, exhaust, brakes, suspension, exterior, and drivetrain categories. What This Collection Covers The Corvette has moved through four modern generations since the C5 launched in 1997, and each one uses different engine architecture, chassis design, and body construction. This collection groups parts confirmed to fit the specific Co...
View Chevrolet Corvette Parts & Accessories Products
Exterior Parts & Accessories
Shop exterior parts and accessories for cars, trucks, Jeeps, and SUVs at Black Ops Auto Works. Explore carbon-fiber hoods, front lips, splitters, spoilers, diffusers, fender flares, truck steps, bed accessories, and exterior trim. Whether you are updating a performance vehicle’s appearance or adding everyday utility to a pickup, choose components matched to your exact vehicle and existing equipment. Carbon-Fiber Hoods and Body Panels Explore Black Ops Auto Works hood designs and selected replacement panels for Jeep Grand Cherokee, Dodge Charger, Dodge Durango, Chrysler 300, and other listed applications. Featured designs include Demon, Sniper, Redeye, and CFR options for supported vehicle configurations. Compare the construction, finish, mounting requirements, and supplied components on each listing. A carbon-fiber appearance does not establish that every product uses the same material or manufacturing method. Browse our Black Ops Carbon Fiber collection for focused shopping. Front ...
View Exterior Parts & Accessories Products