Anderson Composites 2014-2019 Chevrolet Corvette C7 Stingray/Z06 Taillight Bezels

Anderson Composites Carbon Fiber Accessory Built for the 2014-2019 Chevrolet Corvette Z06

The AC-TLB14CHC7 accessory for the 2014-2019 Chevrolet Corvette Z06 is manufactured from 3K 2x2 twill carbon fiber using a vacuum-infused wet layup, delivering the iconic carbon weave with up to 50% weight savings over the factory steel panel. Precision-molded from the OEM panel for an exact body line match, this part delivers up to 50% weight savings over the factory component and installs using existing OEM attachment points with no cutting, drilling, or modification required. Anderson Composites has set the benchmark for carbon fiber exterior components for over a decade, and the AC-TLB14CHC7 reflects that heritage in construction, finish, and fitment accuracy.

Key Features

• Material: 3K 2x2 twill carbon fiber, vacuum-infused wet layup
• Finish: marine-grade gel coat with UV inhibitors, hand-polished to a gloss finish
• Weight savings: up to 50% vs. OEM panel
• Precision-molded from OEM part for exact fitment and body line accuracy
• Direct bolt-on installation using factory mounting points
• UV-resistant finish engineered for long-term exterior durability

Fitment

Specifications

What's Included

• Anderson Composites carbon fiber accessory (AC-TLB14CHC7)
• Mounting hardware (uses OEM attachment points)

Frequently Asked Questions

No. Anderson Composites molds every part from the OEM component so the mounting points are factory-exact. The accessory installs using existing attachment locations without permanent body modification.

Anderson Composites uses a vacuum-infused 3K 2x2 twill carbon fiber wet layup. Resin is drawn evenly through the fiber mat under vacuum pressure, producing a consistent resin-to-fiber ratio without voids.

Yes. Lightly sand the gel coat surface, apply a flexible composite primer, and finish with automotive basecoat and 2K clear coat.

Yes. Anderson Composites designs every part to work with OEM fasteners, clips, and mounting brackets. No specialty hardware is required for standard installation.

Anderson Composites carbon fiber construction achieves up to 50% weight savings over the OEM panel. Combined with matching Anderson Composites hood, trunk lid, or other body components, the savings compound quickly into a meaningful performance gain across the entire build.

Yes. Anderson Composites provides a limited manufacturer warranty on materials and workmanship. Contact Anderson Composites directly for warranty terms and claim procedures specific to this part.

The marine-grade gel coat with UV inhibitors is low-maintenance. Wash with pH-balanced soap, dry with a microfiber cloth, and apply a spray wax or ceramic coating periodically.

Anderson Composites parts are molded to OEM exterior dimensions. Standard suspension or exhaust modifications do not affect bolt-on exterior panel fitment. Custom widebody kits or significant non-OEM body modifications may require verification before ordering.

Installation Overview

1. Mask surrounding paint with tape or moving blankets to protect the existing finish
2. Remove the factory accessory by releasing all OEM fasteners and clips
3. Clean all mounting surfaces to remove adhesive residue and debris
4. Test-fit the AC-TLB14CHC7 to confirm alignment before final installation
5. Secure using factory fasteners and any supplemental adhesive appropriate for the part type
6. Inspect all gaps and body line continuity before driving

WARNING: This product can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and reproductive harm. For more information go to www.P65Warnings.ca.gov.