The AC-TL16CHCAM-ST-DS is an Anderson Composites double-sided carbon fiber trunk lid built specifically for the 2016-2024 Camaro, exposing a clean carbon weave on both the outer and inner surfaces for a show-quality result from every angle. Constructed from 3K 2x2 twill carbon fiber, inner and outer surfaces via a vacuum-infused wet layup, both faces finished in carbon, this decklid installs using your factory hinge bolts and latch hardware with no modification required. Up to 55% weight savings over the OEM steel panel translates directly into improved front-to-rear balance and power-to-weight ratio, the kind of gain that costs nothing in drivability and pays back every time the car moves.
Key Features
Fitment
| Year Range | Make | Model | Trim |
|---|---|---|---|
| 2016-2024 | Camaro | See title for trim details |
Specifications
| Detail | Value |
|---|---|
| Part Number | AC-TL16CHCAM-ST-DS |
| Brand | Anderson Composites |
| Material | 3K 2x2 twill carbon fiber, inner and outer surfaces |
| Construction | vacuum-infused wet layup, both faces finished in carbon |
| Surface Finish | marine-grade gel coat with UV inhibitors, gloss-polished on both the outer and inner surfaces |
| Weight Savings | Up to 55% vs. OEM steel decklid |
| Mounting | Direct bolt-on, OEM hinge hardware |
What's Included
Brand Information
Anderson Composites manufactures application-specific carbon fiber, fiberglass, and composite exterior components for performance vehicles. Construction, finish, mounting, and vehicle compatibility remain manufacturer-part-number specific.
Related Parts
Frequently Asked Questions
Does the AC-TL16CHCAM-ST-DS preserve factory trunk release and latch function?
Yes. The decklid is built around the OEM latch and release geometry. Factory power trunk release, key fob function, and interior handle all operate normally with this lid installed.
Can I mount a factory or aftermarket spoiler on this trunk lid?
Yes. Anderson Composites preserves factory spoiler mounting provisions. OEM spoilers transfer directly, and Anderson Composites' own carbon spoilers are designed to pair with this trunk lid for a fully coordinated rear setup.
What actual weight savings can I expect?
Anderson Composites double-sided carbon fiber construction saves up to 55% over the factory steel panel. On most Camaro platforms the OEM steel decklid weighs between 20 and 40 pounds, so the reduction in high-mounted rear mass is meaningful for both handling balance and power-to-weight ratio.
Does this trunk lid work with my backup camera?
On vehicles where the backup camera is in the rear bumper or license plate area there is no conflict. On vehicles with a camera integrated into the factory trunk lid, verify the camera mounting location relative to the new lid before ordering.
Installation Instructions
WARNING: This product can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and reproductive harm. For more information go to www.P65Warnings.ca.gov.
Shop Anderson Composites hoods, fenders, decklids, splitters, spoilers, diffusers and exterior trim at Black Ops Auto Works. Compare carbon-fiber and fiberglass components by exact vehicle application, body configuration, finish and manufacturer part number. A similar appearance does not establish compatibility with another trim, bumper or body width. Hoods, Fenders and Replacement Panels Identify the exact hood or panel design, construction and finished surfaces before ordering. Single-sided and double-sided carbon construction differ, and a visible carbon finish is a different choice from a panel intended for paint. Check hinge and latch arrangements, hood-pin requirements, vent clearance, heat shielding and any factory components that must transfer. Compare stated weights for the exact part rather than assuming every composite panel offers the same reduction. Splitters, Spoilers, Diffusers and Trim Match front aero to the installed bumper and rear components to the exhaust layout...
View Anderson Composites Products
Carbon fiber parts and accessories for Jeep Grand Cherokee, Trackhawk, Dodge Charger, Challenger, Durango, Chrysler 300, Ford Mustang, and Chevrolet Camaro and Corvette are stocked at Black Ops Auto Works. Shop carbon fiber hoods, front splitters, rear spoilers, diffusers, side skirts, mirror covers, headlight covers, badges, and interior trim for Hellcat, Trackhawk, Demon, SRT, and HEMI 6.2L and 6.4L platforms. Every part is filterable by year, make, model, trim, and engine so the correct fitment ships the first time. Black Ops Auto Works carries 2,338 carbon fiber SKUs across hoods, aero, and trim categories. What This Category Covers Carbon fiber parts combine weight reduction with aggressive styling for builds that want a performance look without sacrificing strength. This category spans full hood replacements, splitters and diffusers for aerodynamic upgrades, and smaller trim and badge pieces that finish off an interior or exterior refresh. Why Carbon Fiber Carbon fiber pan...
View Carbon Fiber Parts & Accessories Products
Find Chevrolet Camaro parts by generation, engine, body and installed equipment. Compare exhaust sound and system scope first, then plan brake, chassis or drivetrain service around the actual assemblies on the car. Choose the Exhaust Scope and Sound AWE Camaro SS listings distinguish axle-back, cat-back and conversion components, with Touring or Track editions, resonated or non-resonated choices and different outlet or tip configurations. Match the exact generation, engine, body and rear valance before comparing sound. An axle-back and a cat-back replace different sections. A conversion kit requires a compatible starting exhaust; review the part number, supplied sections, valve requirements and installation instructions rather than treating it as a complete system. Match Brakes, Body and Drivetrain Equipment Brake pads and rotors must suit the installed caliper, axle and rotor dimensions. Factory performance packages or later conversions can change the service application. Compare c...
View Chevrolet Camaro Parts & Accessories Products
Shop exterior parts and accessories for cars, trucks, Jeeps, and SUVs at Black Ops Auto Works. Explore carbon-fiber hoods, front lips, splitters, spoilers, diffusers, fender flares, truck steps, bed accessories, and exterior trim. Whether you are updating a performance vehicle’s appearance or adding everyday utility to a pickup, choose components matched to your exact vehicle and existing equipment. Carbon-Fiber Hoods and Body Panels Explore Black Ops Auto Works hood designs and selected replacement panels for Jeep Grand Cherokee, Dodge Charger, Dodge Durango, Chrysler 300, and other listed applications. Featured designs include Demon, Sniper, Redeye, and CFR options for supported vehicle configurations. Compare the construction, finish, mounting requirements, and supplied components on each listing. A carbon-fiber appearance does not establish that every product uses the same material or manufacturing method. Browse our Black Ops Carbon Fiber collection for focused shopping. Front ...
View Exterior Parts & Accessories Products
Exterior styling parts and accessories for cars, trucks, and SUVs are stocked at Black Ops Auto Works. Shop spoilers, front splitters, rear diffusers, side skirts, body kits, carbon fiber hoods and trunks, fender flares, badges and emblems, mirror covers, chrome delete trim, and window vents for Jeep Grand Cherokee Trackhawk, Dodge Charger and Challenger, RAM TRX, Chevrolet Camaro and Corvette, and Hellcat and SRT platforms. Every product is filterable by year, make, model, trim, and body style so the correct part ships the first time. Black Ops Auto Works carries 2,389 exterior styling SKUs across aerodynamic, carbon fiber, and badge and trim categories. What This Collection Covers Exterior Styling groups together the parts that change the visual character and aerodynamics of a vehicle, from functional front splitters and rear diffusers to purely cosmetic badges and mirror covers. This collection combines Black Ops Auto Works in-house carbon fiber and fiberglass components with...
View Exterior Styling Products
Carbon fiber trunk lids, decklids, hatches, and rear trim change the rear profile of a street, show, or track build while reducing weight on many applications. Shop model-specific replacement trunk lids for Dodge Charger, Chevrolet Camaro, Honda Civic, Subaru WRX STI and BRZ, Toyota GR Supra, Corvette, and more. Black Ops Auto Works carries 147 trunk SKUs across carbon fiber, fiberglass, OEM-style, vented, and spoiler-integrated designs. Filter by year, make, model, body style, and power-trunk equipment to select the correct rear panel. What This Trunk Collection Covers This collection focuses on exterior trunk lids, rear decklids, hatch panels, and trunk garnishes rather than storage accessories. Parts range from OEM-style replacement panels to aggressive carbon fiber pieces with integrated spoilers and vents. Decklid, trunk lid, and hatch differences A decklid or trunk lid is the rear closure panel on a sedan or coupe. A hatch is the larger rear opening panel on a hatchback. F...
View Trunks Products
