Click to zoom in
The DEI Oil Cooler Heat Shroud is designed to easily wrap around the oil cooler lines without disconnecting the lines making installation simple and easy. The result is greatly reducing harmful radiant heat from soaking into the oil cooler lines. Reduces oil temperature Helps prevent Z06 from going into "limp mode" due to engine oil over heating No need to remove or disconnect lines to install
Key Features
- The DEI Oil Cooler Heat Shroud is designed to easily wrap around the oil cooler lines without disconnecting the lines making installation simple and easy.
- Reduces oil temperature Helps prevent Z06 from going into limp mode due to engine oil over heating No need to remove or disconnect lines to install.
Fitment
| Years | Make | Model | Application |
|---|---|---|---|
| 2014-2019 | Chevrolet | Corvette |
Fitment Notes
Match the exact vehicle range below. Chassis codes, engine requirements, transmission details, roof type, cab style, and other equipment named in the product title are fitment notes and are not separate vehicle models.
Specifications
| Manufacturer | Design Engineering Inc. (DEI) |
|---|---|
| Manufacturer Part Number | 10488 |
| Product Type | Thermal Protection |
| Fitment Type | Vehicle specific |
What's Included
One 18 inch length of Heat Shroud with a 2 to 2-1/2 inch inside diameter.
About DEI
Design Engineering Inc. develops automotive thermal, acoustic, and vibration-control products for underhood, exhaust, interior, and electrical applications. Match every product by exact manufacturer part number and published use.
Related DEI Products
- DEI Fire Sleeve 3/8in I.D. x 25ft Spool
- DEI Fire Sleeve 5/8in I.D. x 25ft Spool
- DEI Fire Sleeve 1in I.D. x 25ft Spool
Browse the DEI collection for related thermal-management products.
Frequently Asked Questions
Is this kit vehicle specific?
Yes. Use only the verified year, make, and model combinations in the Fitment table, then confirm all equipment notes before ordering.
What should I verify before ordering?
Match the DEI part number, product dimensions, material, intended location, and required clearance to the job.
Are all mounting materials included?
Only the components DEI lists for this exact part number are included. Related tape, ties, tools, or surface preparation materials may be separate.
Installation Instructions
- Confirm part number 10488, dimensions, and the intended application.
- Read the DEI instructions supplied for this exact product before disassembly.
- Allow hot components to cool and clean every mounting or contact surface.
- Test-position the product and maintain clearance from moving parts, fluids, and electrical terminals.
- Install with the specified overlap, fasteners, adhesive, or hardware, then inspect it after the first heat cycle.
Chevrolet Corvette Parts & Accessories
Chevrolet Corvette parts and accessories for every generation are stocked at Black Ops Auto Works. Shop cold air intakes, catch cans, oil separators, cat-back and axle-back exhaust systems, valve-back systems, X-pipes, brake pads, brake rotors, brake ducts, big brake kits, sway bars, coilovers, carbon fiber hoods, splitters, spoilers, mirrors, lighting, and drivetrain parts for C5, C6, C7, and C8 Corvettes, including Stingray, Grand Sport, Z06, ZR1, and Z51 trims. Every product is filterable by year, make, model, trim, engine, and drivetrain so the correct part ships the first time. Black Ops Auto Works carries 1,476 Chevrolet Corvette SKUs across intake, exhaust, brakes, suspension, exterior, and drivetrain categories. What This Collection Covers The Corvette has moved through four modern generations since the C5 launched in 1997, and each one uses different engine architecture, chassis design, and body construction. This collection groups parts confirmed to fit the specific Co...
View Chevrolet Corvette Parts & Accessories Products
DEI
Shop DEI heat shields, exhaust wrap, protective sleeves, insulation, and Boom Mat sound-control products at Black Ops Auto Works. Design Engineering Inc. offers solutions for managing heat exposure, panel vibration, and cabin noise. Explore universal materials and vehicle-specific kits for engine bays, exhaust areas, floors, transmission tunnels, doors, and roofs. DEI Exhaust Wrap and Heat Shields This collection includes selected Titanium and glass-fiber exhaust wraps, flexible heat shields, stainless steel shield pads, and starter shields. Choose the product according to the heat source, surrounding components, available clearance, and mounting method. DEI’s Titanium wrap is a woven fiber product made using pulverized lava rock, not titanium metal. The name does not mean it is suitable for wrapping a titanium exhaust. DEI specifically advises against wrapping titanium exhaust systems and recommends considering suitable shield alternatives. Protective Sleeves for Hoses and Wiring E...
View DEI Products