Click to zoom in
This DFC dfc hi-carbon alloy geomet coated rotor - slotted is matched to Dodge Challenger and Dodge Charger under manufacturer part number 910-40036. It is built around the application-specific dimensions, position, and brake-system requirements documented below so the replacement can be checked before installation.
Key Features
- High-carbon rotor construction supports strength and vibration control.
- DFC specifies tight disc thickness variation control for consistent pad contact.
- Rotor geometry is engineered for consistent friction contact.
- Slotted friction surface helps refresh the pad face and move debris away.
- Coated surfaces provide added corrosion protection in exposed areas.
- The listed iron casting specification supports rotor strength and dimensional stability.
Fitment
| Years | Make | Model |
|---|---|---|
| 2015-2020 | Dodge | Challenger |
| 2015-2020 | Dodge | Charger |
Specifications
| Manufacturer | Dynamic Friction Company |
|---|---|
| Manufacturer Part Number | 910-40036 |
| Product Type | Brake Rotors - Slotted - Cryo |
| Position | Front |
| Outside Diameter | 390 mm |
| Nominal Thickness | 34 mm |
| Center Hole Diameter | 72.6 mm |
| Bolt Hole Quantity | 5 EA |
| Stud/Lug Hole Quantity | 5 |
| Surface Type | Slotted |
| Solid Or Vented Type Rotor | Vented |
| Disc Finish | Fully Coated GEOMET |
| Hat Finish | Fully Coated GEOMET |
| Rust Resistant Coating | Yes |
| Weight | 36.85 LB |
What's Included
One DFC brake component or matched service set in the exact quantity and configuration identified by manufacturer part number 910-40036. Additional components are included only when expressly listed for this MPN.
About Dynamic Friction Company
Dynamic Friction Company develops OE-style and performance brake components for vehicle-specific service. Correct selection depends on the exact part number, application, dimensions, and brake-system position.
Related DFC Brake Parts
- DFC 15-20 Dodge Challenger Front Slotted Hi-Carbon Alloy Geomet Coated Rotor
- DFC 05-23 Chrysler 300 Rear GeoSPEC Coated Rotor - Slotted
- DFC Active Performance Front Brake Pads and Hardware Kit for 1987 to 2005 BMW 740i
Browse the DFC collection for additional brake-service components.
Frequently Asked Questions
How do I confirm this DFC part fits my vehicle?
Match the exact manufacturer part number and every year, make, model, axle-position, brake-system, and dimensional requirement shown on this page. VIN-level confirmation is recommended when production splits exist.
Should related brake components be inspected during installation?
Yes. Inspect the mating pads or shoes, rotors or drums, calipers, hoses, lines, hardware, fluid condition, and wheel bearings as applicable before returning the vehicle to service.
Does this brake component require a break-in or final safety check?
Complete every bleeding, adjustment, torque, leak-check, pedal-restoration, and bedding step required for this exact component and vehicle before normal driving.
Installation Instructions
- Confirm the exact vehicle, axle position, and rotor side before disassembly
- Compare the new rotor with the removed part and clean the hub face
- Measure hub and rotor runout, then install with serviceable pads and hardware
- Torque all fasteners to the vehicle service-manual values
- Bed the pads and rotors using the friction manufacturer's procedure
DFC Brake Parts
Shop DFC brake pads, brake rotors, drum brake shoes, and replacement brake components at Black Ops Auto Works. Dynamic Friction Company offers application-specific parts for brake maintenance and replacement across passenger cars, performance vehicles, trucks, and SUVs. Compare OE-style rotors, coated high-carbon alloy rotors, selected drilled and slotted designs, and brake pad options by exact vehicle application and manufacturer part number. DFC Brake Rotors and Replacement Brake Discs This collection includes DFC OE-style brake rotors and selected high-carbon alloy rotors with GEOMET coating. Available surface configurations include plain, drilled, slotted, and drilled-and-slotted designs, depending on the application. Choose the rotor specified for your braking system rather than selecting by appearance alone. Rotor diameter, thickness, height, hub dimensions, and axle position must match the vehicle’s requirements. Some listings are specific to the left or right side. Similar m...
View DFC Brake Parts Products
Dodge Challenger
Shop Dodge Challenger parts and accessories at Black Ops Auto Works. Explore cold air intakes, exhaust systems, suspension upgrades, drivetrain components, brake parts, catch cans, and styling accessories for supported Challenger applications. Find options for V6, R/T, Scat Pack, SRT, Hellcat, Redeye, and Demon builds, with fitment determined by the individual product. Dodge Challenger Cold Air Intakes and Engine Accessories Compare selected intake systems from Legmaker, JLT, aFe, and K&N for supported naturally aspirated and supercharged engines. Choose by exact model year and engine configuration, then review filter type, inlet connections, and compatibility with existing modifications. The collection also includes selected throttle bodies, fuel system components, thermostat housings, and engine-bay covers. Separate cosmetic accessories from functional engine upgrades when planning your project, and review any calibration or supporting-hardware requirements before ordering. Ch...
View Dodge Challenger Products