Click to zoom in
Put Every Horsepower of Your Hellcat V8 to the Pavement
This front and rear HD driveshaft kit is engineered for the 2021 to 2026 Dodge Durango SRT Hellcat lineup, replacing the factory 53011151AB and P53011413AB driveshafts with a direct mount setup that bolts in without adapters. Built around Neapco Beast Mode U joints and a choice of aluminum or carbon fiber tubing, this kit is designed to handle the torque of the supercharged 6.2L V8 without the flex or vibration that plagues the factory units under hard launches.
Key Features
- Front driveshaft available in 3 inch by .125 inch aluminum tubing or 2 inch by .155 inch carbon fiber with a 2.31 inch outside diameter
- Rear driveshaft available in 3.5 inch by .155 inch carbon fiber (3.81 inch OD, rated 1500 plus horsepower, 18 pounds) or 4.0 inch by .125 inch aluminum (4.0 inch OD, rated 1000 plus horsepower, 22 pounds)
- Front shaft uses a Neapco slip sleeve, 1310 Series Beast Mode Neapco U joints, and forged steel direct mount flange yokes on both ends
- Rear shaft uses 1350 Series Beast Mode Neapco Performance U joints and billet aluminum HD direct mount flange yokes
- Direct mount design on both ends means no adapters are needed for installation
- Replaces Mopar 53011151AB, P53011413AB, P53011413AC, 53011413AC, 53011413AB, 53010904AC, and P53010904AC
Fitment Table
| Year Range | Make | Model | Trim |
|---|---|---|---|
| 2021 | Dodge | Durango | SRT Hellcat |
| 2023-2024 | Dodge | Durango | SRT Hellcat |
| 2023-2024 | Dodge | Durango | SRT Hellcat Plus |
| 2023-2025 | Dodge | Durango | SRT Hellcat Premium |
| 2025-2026 | Dodge | Durango | SRT Hellcat Jailbreak |
| 2025 | Dodge | Durango | SRT Hellcat Brass Monkey |
| 2025 | Dodge | Durango | SRT Hellcat Hammerhead |
| 2025 | Dodge | Durango | SRT Hellcat Silver Bullet |
Specifications
| Detail | Value |
|---|---|
| Brand | East Coast Driveline |
| Part Number | 53011151AB |
| Front Shaft Material Options | 3 in x .125 in Aluminum or 2 in x .155 in Carbon Fiber |
| Rear Shaft Material Options | 3.5 in x .155 in Carbon Fiber or 4.0 in x .125 in Aluminum |
| Front U Joints | 1310 Series Beast Mode Neapco |
| Rear U Joints | 1350 Series Beast Mode Neapco Performance |
| Rear Carbon Fiber HP Rating | 1500 plus HP |
| Rear Aluminum HP Rating | 1000 plus HP |
| Adapters Required | No |
| Lead Time | Made to order, 1 to 2 weeks |
What's Included
- 1 x Front HD driveshaft, material per selected option
- 1 x Rear HD driveshaft, material per selected option
- Direct mount flange yokes on all four ends
About East Coast Driveline
East Coast Driveline builds performance driveshafts for high horsepower domestic platforms, pairing aircraft grade aluminum and carbon fiber tubing with Neapco Beast Mode U joints. Every shaft is designed as a direct mount replacement so owners can upgrade without sourcing extra adapters or modifying factory mounting points.
FAQ
What is the 53011151AB driveshaft kit?
The 53011151AB kit is a front and rear HD driveshaft replacement built for the 2021 to 2026 Dodge Durango SRT Hellcat, designed to handle supercharged V8 torque with a direct mount fit and no adapters required.
Will this kit fit a Durango SRT Hellcat Plus or Premium trim?
Yes, this kit fits the SRT Hellcat, SRT Hellcat Plus, SRT Hellcat Premium, SRT Hellcat Jailbreak, SRT Hellcat Brass Monkey, SRT Hellcat Hammerhead, and SRT Hellcat Silver Bullet trims across the covered model years.
Do I need adapters to install this driveshaft kit?
No, both the front and rear shafts use direct mount forged steel or billet aluminum flange yokes that bolt straight to the factory mounting points.
What is the difference between the aluminum and carbon fiber rear driveshaft?
The carbon fiber rear shaft is rated for 1500 plus horsepower and weighs 18 pounds, while the aluminum rear shaft is rated for 1000 plus horsepower and weighs 22 pounds.
What U joints are used on this driveshaft kit?
The front shaft uses 1310 Series Beast Mode Neapco U joints and the rear shaft uses 1350 Series Beast Mode Neapco Performance U joints.
Does this kit replace the factory Mopar driveshafts?
Yes, it is a direct replacement for Mopar 53011151AB, P53011413AB, P53011413AC, 53011413AC, 53011413AB, 53010904AC, and P53010904AC.
How long does it take to receive this driveshaft kit?
This kit is made to order with a typical lead time of one to two weeks before it ships.
Can this driveshaft kit handle a supercharged 6.2L V8?
Yes, it is purpose built for the supercharged 6.2L Hellcat V8 platform and is designed to reduce flex and vibration compared to the factory driveshafts under hard acceleration.
Install Instructions
- Raise and safely support the vehicle, then remove the wheels if needed for access
- Mark the orientation of the factory front and rear driveshafts before removal
- Unbolt the factory driveshafts from the transfer case, transmission, and differential flanges
- Remove the factory driveshafts and center support bearing hardware as applicable
- Position the new front and rear driveshafts and bolt the direct mount flange yokes into place
- Torque all flange bolts to manufacturer specification
- Lower the vehicle and test drive to confirm smooth operation with no vibration
