Dodge Durango Parts & Accessories

What This Collection Covers

The Dodge Durango is a body on frame three row SUV built on Stellantis Mopar platforms shared in part with the Jeep Grand Cherokee. Its HEMI and Hellcat engine options give it a stronger aftermarket catalog than a typical family SUV, with real performance and suspension part support at every trim level.

Durango Trims Covered

Durango SXT and GT with the 3.6L Pentastar V6, Durango R/T with the 5.7L HEMI, Durango Citadel, Durango SRT 392 with the 6.4L HEMI, and the Durango Hellcat with the 6.2L supercharged HEMI producing 710 horsepower.

Product Categories

Cold air intakes, cat back exhaust systems, coilovers, lowering springs, billet adjustable control arms, sway bar end links, strut braces, toe links, brake lines, carbon fiber hoods, mirror covers, gauge pillar pods, and driveshaft and differential upgrades.

Cold Air Intakes for HEMI and Hellcat Durango

Legmaker Intakes produces carbon fiber cold air intakes specific to the Durango Hellcat 6.2L and the Durango SRT 392 6.4L, along with a HEMI short ram intake for the 5.7L R/T. These intakes replace the restrictive factory airbox for improved throttle response and a more aggressive supercharger or intake sound.

Matching a Tune to Intake Changes

A cold air intake alone typically does not require a tune, but combining an intake with a cat back exhaust or forced induction pulley change often benefits from a professional tune to optimize air fuel ratio and timing on the HEMI platform.

Cat Back Exhaust for Durango R/T, SRT, and Hellcat

Corsa and Borla both produce direct fit cat back exhaust systems for the 5.7L HEMI in the R/T and the 6.4L in the SRT 392, bolting on at the factory exit locations. For the Hellcat variant, a performance cat back system amplifies the supercharged exhaust note significantly compared to the factory system.

Coilovers, Lowering Springs, and Handling

Silver's NEOMAX coilovers provide adjustable ride height and damping for Durango SRT and Hellcat owners chasing sharper cornering response. Swift Spec-R lowering springs work on the factory shocks for a more affordable stance and handling upgrade without the harsh ride of a full coilover kit.

Billet Control Arms and Chassis Bracing

Adjustable front upper control arms, adjustable rear control arms, rear toe links, and billet sway bar end links allow proper alignment correction after a lowering job and add chassis stiffness for a Durango driven hard through corners. Strut braces reduce chassis flex under aggressive cornering loads.

Brakes and Brake Lines

Stainless steel front and rear brake lines from Rotora reduce line expansion under hard braking for a firmer pedal feel, particularly valuable on the heavier Hellcat variant. Braided lines pair well with upgraded pads and rotors for owners running the Durango on track days or spirited mountain driving.

Exterior and Interior Styling

Carbon fiber mirror covers, Sniper hoods, gauge pillar pods, and trunk badge inlays let Durango owners personalize the SUV to match Charger and Challenger styling cues. Single and triple gauge pillar pods add auxiliary gauges for boost, oil pressure, and air fuel ratio monitoring on modified Hellcat and SRT builds.

Top Dodge Durango Brands

• Legmaker Intakes. Carbon fiber cold air intakes for Hellcat, SRT 392, and HEMI R/T
• Corsa Performance. Cat back exhaust systems for R/T, SRT, and Hellcat
• Borla. Cat back exhaust systems and performance mufflers
• Silver's Suspension. NEOMAX coilover kits
• Swift Springs. Spec-R lowering springs
• Eibach. Pro-Kit lowering springs
• Black Ops Auto Works. Billet control arms, toe links, sway bar end links, and strut braces
• Rotora. Stainless steel brake lines and brake kits
• Rebadge Design and Graphics. Hellcat and SRT badges and trunk inlays
• JXB Performance. Driveshaft center support bearing carrier upgrades
• Per4mance Development. Rear differential brace for Hellcat and SRT applications
• K&N. Replacement and performance air filters

How to Choose the Correct Dodge Durango Part

• Confirm the exact model year of the Durango
• Verify the trim (SXT, GT, R/T, Citadel, SRT 392, or Hellcat)
• Confirm the engine (3.6L Pentastar, 5.7L HEMI, 6.4L 392, or 6.2L supercharged Hellcat)
• Verify the drivetrain (rear wheel drive or all wheel drive)
• Check whether the vehicle has factory Brembo brakes before ordering brake parts
• Confirm any existing modifications (lowering, aftermarket exhaust, or tune)
• Order alignment correction hardware after installing lowering springs or coilovers
• Verify Hellcat specific parts before ordering since they do not cross fit SRT or R/T
• Check whether the part is shared with the Jeep Grand Cherokee WK2 platform or Durango specific
• Read the complete fitment notes before ordering exterior and interior trim parts

Common Questions

What exhaust fits the Dodge Durango R/T and SRT?

Corsa and Borla both produce direct fit cat back systems for the 5.7L HEMI in the R/T and the 6.4L in the SRT 392. These are bolt on systems that exit at the factory locations without modification.

Are coilovers available for the Durango SRT and Hellcat?

Yes. Silver's NEOMAX coilovers and Swift Spec-R lowering springs are both available for the Durango SRT and Hellcat, improving cornering response and reducing body roll on this heavier three row SUV.

Do Durango parts interchange with the Jeep Grand Cherokee?

Some suspension and drivetrain components cross fit between the Durango and the WK2 Jeep Grand Cherokee since they share platform elements, but body panels, badges, and many exhaust systems are Durango specific. Always verify the manufacturer application list before ordering.

What is the difference between the Durango R/T, SRT 392, and Hellcat?

The R/T uses the 5.7L HEMI, the SRT 392 uses the 6.4L HEMI producing 475 horsepower, and the Hellcat uses the 6.2L supercharged HEMI producing 710 horsepower. Hellcat specific cooling, driveshaft, and brake parts do not cross fit the R/T or SRT 392.

Does a cold air intake require a tune on the Durango Hellcat?

A cold air intake alone typically does not require a tune, but pairing it with exhaust changes or supercharger pulley modifications on the Hellcat benefits from a professional tune for correct air fuel ratio and timing.

What is the benefit of a billet control arm over the factory arm?

Billet adjustable control arms allow proper caster and camber correction after lowering the Durango with springs or coilovers, while also adding strength over the factory stamped steel arms for aggressive driving.

Do I need new brake lines after adding a big brake kit?

Stainless steel brake lines are recommended alongside larger brake kits since they resist expansion under the higher clamping forces and heat generated by upgraded calipers and rotors, providing a firmer and more consistent pedal feel.

Can I lower a Durango Hellcat without affecting ride quality significantly?

Lowering springs from Swift or Eibach reduce ride height modestly on the factory shocks with a manageable ride quality tradeoff, while adjustable coilovers from Silver's allow tuning the damping to balance handling and comfort more precisely.

What driveshaft upgrades are available for the Durango Hellcat?

JXB Performance offers an upgraded center support bearing carrier for the Durango and Grand Cherokee shared driveshaft, while Per4mance Development produces a rear differential brace for SRT, Hellcat, and Trackhawk applications to reduce differential movement under load.

Are carbon fiber hoods available for the Durango?

Yes. The Durango Sniper hood is available in a fiberglass inner and outer configuration for a distinct styling upgrade, and Rebadge Design badges pair with the hood to complete a personalized exterior appearance.

Why Buy Dodge Durango Parts from Black Ops Auto Works

Black Ops Auto Works stocks 283 Dodge Durango SKUs across R/T, SRT 392, and Hellcat trims with real fitment data, competitive pricing, and support from staff who build HEMI and Hellcat vehicles themselves. Products are filterable by year, make, model, trim, engine, and drivetrain to confirm the correct application before ordering.

For focused shopping, browse our Dodge Charger Parts and Accessories, Dodge Challenger Parts, Mopar Parts and Accessories, Coilovers, Cold Air Intakes, Cat Back Exhaust, and Lift Kits.