Husky Liners HSLHBMR24DCS Guardian Comfort Bed Mat for 2024-2026 Ford Ranger 5.1ft Bed

The Husky Liners HSLHBMR24DCS Guardian Comfort Bed Mat is built specifically for the 2024, 2025, and 2026 Ford Ranger with the 5.1ft bed. Constructed from Husky Liners' proprietary DriGard material, the HSLHBMR24DCS delivers a completely flat, cushioned surface that grips your cargo, protects your truck bed floor, and holds up to whatever you load in. Installation requires zero drilling and zero permanent modifications the included hook-and-loop fasteners secure the mat in under 30 minutes. Assembled in the USA and backed by Husky Liners' Limited Lifetime Warranty.

Why the HSLHBMR24DCS Outperforms Drop-In Liners and Sprayed-In Coatings

Standard drop-in liners trap moisture and debris underneath, accelerating rust. Spray-in coatings are permanent, rough on cargo, and hard on your knees. The HSLHBMR24DCS takes a different approach entirely. The DriGard top layer provides a soft, cushioned surface that reduces cargo vibration and noise, protects delicate gear from scratching, and saves your knees every time you climb in. The mat lays completely flat against the bed floor with no raised edges to catch on gear or create pressure points.

Skid resistance is engineered into the surface itself cargo stays put during acceleration, braking, and cornering without additional straps or blocks. And unlike spray-in coatings, the HSLHBMR24DCS cleans in seconds with a garden hose. No removal required. No special cleaners needed.

DriGard Material Technology

DriGard is Husky Liners' proprietary polypropylene compound developed specifically for truck bed protection. The material resists UV exposure, moisture, chemicals, stains, and odors retaining its appearance season after season without fading, cracking, or hardening. Competitors using standard rubber or recycled materials simply cannot match the long-term durability and cushion that DriGard provides.

The HSLHBMR24DCS is designed to work whether your 2024-2026 Ranger has a sprayed-in liner or bare bed floor. The hook-and-loop fasteners grip both surfaces without adhesive damage or permanent attachment.

Fitment for 2024-2026 Ford Ranger with 5.1ft Bed

The HSLHBMR24DCS is a direct, guaranteed fit for every trim of the 2024-2026 Ford Ranger equipped with the 5.1ft (61-inch) short bed. No trim restrictions apply. Confirm your bed length before ordering this mat is cut specifically for the 5.1ft bed and will not fit the prior-generation Ranger or other bed lengths.

Full Specifications

Installation Overview

The HSLHBMR24DCS installs in under 30 minutes with no tools, no drilling, and no permanent modifications. The multi-piece mat ships with adhesive-backed hook-and-loop fasteners that secure it directly to the bed floor. Because there are no permanent attachments, the mat can be removed at any time without damage to the truck — preserving your Ranger's resale value.

• Clean and dry the bed floor before installation
• Attach the included hook-and-loop fasteners to the designated mat locations
• Press the mat firmly into the bed, aligning to the bed walls
• Compatible with sprayed-in liner or bare metal bed floor
• Remove and reinstall as needed no damage to truck finish

Won't Void Your Ford Factory Warranty

The HSLHBMR24DCS is a non-invasive, bolt-free accessory that installs without any modification to your Ranger's structure, frame, or mechanical systems. Installing this bed mat cannot void your Ford factory warranty. Under the Magnuson-Moss Warranty Act, a manufacturer cannot void your warranty simply because you added an aftermarket accessory, unless they can prove that accessory directly caused the specific failure being claimed.

California residents: This product contains chemicals known to the State of California to cause cancer and reproductive harm. See www.p65warnings.ca.gov.

About Husky Liners

Husky Liners has been manufacturing truck and SUV protection products in the USA since 1988. Known for their precisely engineered fit and proprietary material formulations, Husky Liners backs every product with a Limited Lifetime Warranty and US-based customer support. The Guardian Comfort line represents their premium bed mat category, combining everyday durability with a level of comfort and cushion that standard rubber mats simply do not offer.

Frequently Asked Questions

Does the HSLHBMR24DCS fit the 2024 Ford Ranger XL, XLT, Lariat, and Raptor?
Yes. The HSLHBMR24DCS fits all trims of the 2024 Ford Ranger equipped with the 5.1ft bed. No trim restrictions apply across the 2024, 2025, or 2026 model years.

Will the HSLHBMR24DCS fit the 2025 and 2026 Ford Ranger?
Yes. Fitment is confirmed by Husky Liners directly for 2024, 2025, and 2026 Ford Ranger models with the 5.1ft bed.

Does the HSLHBMR24DCS work with a sprayed-in bed liner?
Yes. The HSLHBMR24DCS is compatible with both bare bed floors and sprayed-in liner applications. The hook-and-loop fasteners grip both surfaces securely.

Will the HSLHBMR24DCS fit the previous-generation Ford Ranger (2019-2023)?
No. The HSLHBMR24DCS is designed specifically for the current-generation 2024-2026 Ford Ranger with the 5.1ft bed. The prior-generation Ranger uses a different bed profile and requires a different part number.

Does the HSLHBMR24DCS require drilling or permanent modification?
No. The mat uses adhesive-backed hook-and-loop fasteners included in the kit. No drilling, no cutting, and no permanent modifications are required. The mat can be removed at any time without damage to the truck.

How do I clean the HSLHBMR24DCS?
A simple hose-down removes dirt, mud, debris, and grime from the DriGard surface. No removal from the truck is necessary. The material resists stains, odors, moisture, and chemicals, so routine cleaning requires nothing beyond water.

Does the HSLHBMR24DCS prevent cargo from sliding?
Yes. The DriGard surface is engineered with superior skid resistance to keep cargo from sliding and shifting during acceleration, braking, and cornering. The cushioned surface also reduces vibration and rattling from loose items.

What warranty covers the HSLHBMR24DCS?
The HSLHBMR24DCS is backed by Husky Liners' Limited Lifetime Warranty for the original purchaser, covering defects in materials and workmanship under normal use and conditions. Husky Liners' US-based customer service team supports all warranty claims.

Will installing the HSLHBMR24DCS void my Ford Ranger warranty?
No. Under the Magnuson-Moss Warranty Act, adding a non-invasive accessory like a bed mat cannot void your Ford factory warranty. Ford would need to prove the mat directly caused any failure being claimed before a warranty denial could be upheld.