Click to zoom in
This Innovate Motorsports oxygen-sensor exhaust hardware, manufacturer part number 3838, is selected by its exact sensor, controller, connector, measurement range, cable, material, and intended use rather than a single year-make-model application. Confirm every specification and package component before ordering.
Key Features
- This increased depth 1 in. stainless steel weld fitting (bung) & plug kit for Innovate Motorsports wideband O2 sensors is an optional replacement for the parts included as standard with Innovate Motorsports products.
- Installation of the Double Length Bung & Plug, 1", Stainless Bung & Mild-Steel Plug is relatively simple.
Fitment
| Years | Make | Model | Application |
|---|---|---|---|
| Universal | Not vehicle specific | Not vehicle specific | Match the exact sensor, controller, connector, cable, thread, measurement range, and intended use |
Specifications
| Brand | Innovate Motorsports |
|---|---|
| Manufacturer Part Number | 3838 |
| Product Type | Exhaust Hardware |
| Fitment Type | Universal or system specific |
| Condition | New |
What's Included
One new Innovate Motorsports oxygen-sensor exhaust hardware package identified by manufacturer part number 3838, in the exact configuration and quantity stated by the title. Sensors, controllers, gauges, cables, bungs, adapters, wiring, and mounting hardware are included only when expressly listed.
About Innovate Motorsports
Innovate Motorsports develops wideband air-fuel measurement systems, gauges, sensors, data loggers, boost controls, exhaust sensor hardware, and tuning accessories for automotive performance and diagnostic work.
Related Innovate Motorsports Products
- Shop all Innovate Motorsports products
- Innovate Extended Bung/Plug Kit 1 inch Tall Mild Steel
- Innovate Exhaust Clamp, Temporary 02 Sensor Install Accessory
- Innovate HBX-1 (Heat-Sink Bung Extender)
Frequently Asked Questions
Which oxygen sensor or bung size does this part use?
Match the exact sensor family, thread size, material, cable length, and controller compatibility. Similar-looking wideband sensors and bungs are not automatically interchangeable.
Where should the oxygen sensor be installed?
Placement must avoid excessive heat, condensation, leaks, and poor exhaust flow. Follow the current Innovate instructions for angle, distance, and operating-temperature limits.
Can this replace a factory narrowband oxygen sensor?
Do not assume direct replacement. Confirm thread, wiring, controller type, sensor function, and the vehicle's factory engine-management requirements.
Installation Instructions
Read the current Innovate Motorsports instructions for part number 3838. Disconnect vehicle power when wiring is involved, use the specified fuse and ground points, route cables away from heat and moving parts, place sensors within their operating limits, check exhaust and pressure connections for leaks, and complete all required setup or calibration before operation.
Exhaust Components
Exhaust components and exhaust hardware for cars, trucks, diesels, and import performance builds are stocked at Black Ops Auto Works. Shop exhaust gaskets, exhaust adapters, exhaust cutouts, exhaust valve controllers, exhaust hangers, exhaust wrap, oxygen sensors, exhaust brakes, and mandrel bend tubing for HEMI, Hellcat, Trackhawk, TRX, LS, LT, Coyote, EcoBoost, WRX, STI, and Cummins and Duramax diesel platforms. Every product is filterable by year, make, model, trim, engine, and drivetrain so the correct part ships the first time. Black Ops Auto Works carries 580 exhaust component SKUs across gaskets, hangers, cutouts, sensors, and fabrication supplies. What This Category Covers The Exhaust Components category groups the small parts that hold an exhaust system together and make it fit right. This includes exhaust gaskets, flange hardware, hangers and mounts, wrap and heat shielding, electronic valve controllers, oxygen sensors, exhaust brakes for diesel trucks, and raw mandrel...
View Exhaust Components Products
Exhaust Hardware
Exhaust hardware, V-band components, clamps, gaskets, studs, bolts, hangers, springs, and fabrication supplies keep custom and replacement exhaust systems sealed, supported, and serviceable. Shop stainless clamps, weld-on flanges, exhaust springs, manifold studs, tube sections, hangers, heat-resistant fasteners, and repair hardware from Vibrant Performance, Stainless Bros, Ticon Industries, Mikalor, DEI, and more. Every product is filterable by year, make, model, trim, engine, and drivetrain where application data is available, helping the correct part ship the first time. Black Ops Auto Works carries 49 exhaust hardware SKUs across fitment-specific replacements, performance upgrades, service parts, and installation hardware. What This Collection Covers Exhaust hardware is the finishing system for a cat-back, downpipe, turbo-back, header, or custom fabrication project. The correct clamp, flange, gasket, hanger, and fastener choice helps prevent leaks, rattles, and seized hardwar...
View Exhaust Hardware Products
Exhaust Systems
Shop performance exhaust systems, cat-backs, axle-backs, headers, mufflers, and exhaust tips at Black Ops Auto Works. Compare options from Borla, CORSA, Solo Performance, AWE, MagnaFlow, MBRP, Kooks, Akrapovic, Invidia, and other brands. Find complete systems and individual components for muscle cars, performance SUVs, trucks, imports, and European vehicles. Cat-Back and Axle-Back Exhaust Systems Choose the exhaust section that matches your project. Cat-back systems generally replace the exhaust downstream of the catalytic converter, while axle-back systems replace the rear section. Exact connection points and package contents vary by vehicle. Compare muffler design, pipe diameter, exit location, tip configuration, and compatibility with existing exhaust components. Exhaust for HEMI, SRT, Trackhawk, and Hellcat Vehicles This collection includes exhaust options for selected Jeep Grand Cherokee SRT and Trackhawk, Dodge Durango SRT and Hellcat, Dodge Charger, Chrysler 300, and Ram appl...
View Exhaust Systems Products
Innovate Motorsports
Shop Innovate Motorsports wideband air-fuel gauges, oxygen sensors, controllers, data loggers, boost controls, cables, and exhaust sensor hardware by exact manufacturer part number. Confirm the sensor family, controller series, connector, cable length, measurement range, thread, and package contents before ordering. Innovate Motorsports Product Families The collection includes MTX, DB, PowerSafe, LC, LM, and SCG measurement systems plus replacement sensors, programming cables, pressure sensors, exhaust bungs, heat-sink adapters, and installation accessories. Choosing the Correct Innovate Component Match the complete manufacturer part number Confirm whether the listing is a complete kit or a component only Verify the controller series, sensor family, connector, cable length, and measurement range Match exhaust bung thread and material to the installation Review the current setup and calibration instructions before operation Related Measurement Collections Gauges Gauge Components ...
View Innovate Motorsports Products