-19%
Sold out
MBRP Cat-Back Exhaust Dodge Durango 3.6L V6 2011-2025
Click to zoom in

MBRP 2011+ Dodge Durango 3.6L V6 T304 SS 3.0in Cat-Back Dual Rear Exit Exhaust w/ Carbon Fiber Tips

MBRP
MBRPS51093CF
882963135803
Catback
Out of stock
$ 1,822.05 $ 1,474.99

SKU: S51093CF / UPC: 882963135803

MBRP 3-Inch Cat-Back Exhaust System for 2011-2025 Dodge Durango 3.6L V6 – Dual Rear Split Exit with Carbon Fiber Tips

The MBRP cat-back exhaust system is a direct bolt-on upgrade that delivers measurable gains in exhaust flow and engine response. This T304 stainless steel setup replaces the factory dual exhaust, routing 3-inch mandrel-bent pipes from the catalytic converters back to dual split rear exits finished with premium carbon fiber tips. Drivers report a clean moderate tone for daily cruising that builds to a strong, resonant growl under throttle ideal for those seeking noticeable power and presence without overwhelming cabin noise.

What sets the S51093CF apart in the Dodge Durango exhaust category is its proven engineering: dyno-tested to achieve up to 112 percent greater flow compared to stock systems, unlocking additional horsepower and torque by reducing backpressure and allowing freer expulsion of exhaust gases.

Paired with the durable T304 stainless construction, which resists rust and corrosion far better than milder aluminized alternatives, this system holds up under harsh conditions while maintaining peak efficiency over time. For Durango owners prioritizing real-world gains in acceleration and fuel efficiency, the S51093CF stands as the clear performer backed by extensive testing and widespread use.

Precise Vehicle Fitment

  • Years: 2011-2025
  • Make: Dodge
  • Model: Durango
  • Engine: 3.6L V6

Notes: Direct replacement for factory dual exhaust; no modifications required for installation on stock or modified setups.

Complete Kit Contents

The S51093CF arrives as a full bolt-on kit with all necessary components for a straightforward install. Here's exactly what's included:

Item No.

Part Number

Description

Quantity

1

W115181

Pipe Assembly, 3", Driver-Side Front

1

2

W115182

Pipe Assembly, 3", Passenger-Side Front

1

3

W114159

Pipe Assembly, 3", H

1

4

115184

Pipe, 3"

1

5

115185

Pipe, 3"

1

6

W115186-01

Pipe Assembly, 3", Driver-Side Rear

1

7

W115187-01

Pipe Assembly, 3", Passenger-Side Rear

1

8

3.0ACS

Clamp, 3.0", Band, Stainless Steel

6

9

HBM0001-070

Bolt, Hex Flange, M10-1.5 x 70mm, Zinc 8.8

4

10

HWS0001-375

Washer, Flat, 3/8", Zinc

4

11

T5184CF

Tip, 3" In, 5" OD Out, Carbon Fiber

2

All pipes are precision jig-manufactured for exact alignment, ensuring a leak-free seal and hassle-free assembly using basic tools.

Key Specifications

  • Main Part Number: S51093CF
  • UPC: 882963135803
  • Material: T304 Stainless Steel tubing with stainless steel band clamps
  • Pipe Diameter: 3 inches throughout
  • Exhaust Configuration: Cat-back from catalytic converters; dual split rear exit
  • Tip Style: Dual wall carbon fiber, 3-inch inlet / 5-inch outer diameter
  • Sound Profile: Street series moderate cruising tone with aggressive acceleration note
  • Installation Type: Bolt-on (no welding needed)
  • Warranty: Lifetime structural warranty against defects
  • Product Weight: 83 pounds
  • Shipping Box Dimensions: 16.5 inches wide x 15 inches high x 47.5 inches long

This MBRP Dodge Durango 3.6L V6 exhaust system is engineered for seamless integration, making it the go-to choice for enthusiasts building a responsive, long-lasting setup. Order the S51093CF today and experience the difference in every drive.

Request For Information

Have questions about MBRP 2011+ Dodge Durango 3.6L V6 T304 SS 3.0in Cat-Back Dual Rear Exit Exhaust w/ Carbon Fiber Tips? Fill out the form below and we'll get back to you by the next business day.
Carbon Fiber Parts & Accessories

Carbon Fiber Parts & Accessories

Carbon fiber parts and accessories for Jeep Grand Cherokee, Trackhawk, Dodge Charger, Challenger, Durango, Chrysler 300, Ford Mustang, and Chevrolet Camaro and Corvette are stocked at Black Ops Auto Works. Shop carbon fiber hoods, front splitters, rear spoilers, diffusers, side skirts, mirror covers, headlight covers, badges, and interior trim for Hellcat, Trackhawk, Demon, SRT, and HEMI 6.2L and 6.4L platforms. Every part is filterable by year, make, model, trim, and engine so the correct fitment ships the first time. Black Ops Auto Works carries 2,338 carbon fiber SKUs across hoods, aero, and trim categories. What This Category Covers Carbon fiber parts combine weight reduction with aggressive styling for builds that want a performance look without sacrificing strength. This category spans full hood replacements, splitters and diffusers for aerodynamic upgrades, and smaller trim and badge pieces that finish off an interior or exterior refresh. Why Carbon Fiber Carbon fiber pan...

View Carbon Fiber Parts & Accessories Products
Catback

Catback

A catback exhaust system replaces everything from the catalytic converter back, covering the mid pipe, muffler, and tailpipe section in one bolt on upgrade. This collection covers catback systems for trucks, Jeeps, muscle cars, imports, and performance SUVs, giving you a straightforward way to improve sound, exhaust flow, and rear end styling without touching the factory catalytic converters or front pipe. Catback systems are available in stainless steel and titanium construction, with dual rear exit, single exit, and quad tip configurations, and a range of sound levels from mild touring tone to aggressive track character. Whether you want a deeper daily driver sound or a full track ready exhaust note, you will find a matched system for your platform here. What This Category Covers This collection includes complete catback exhaust systems, cat-back kits, dual rear exit systems, axle back adjacent catback upgrades, stainless steel and titanium exhaust systems, and street, tourin...

View Catback Products
Dodge Durango Parts & Accessories

Dodge Durango Parts & Accessories

Dodge Durango parts and accessories for every trim from the 3.6L Pentastar V6 through the 5.7L HEMI R/T, 6.4L 392 SRT, and 6.2L supercharged Hellcat are stocked at Black Ops Auto Works. Shop cold air intakes, cat back exhaust systems, coilovers and lowering springs, billet control arms, sway bar end links, carbon fiber hoods, and brake upgrades for Durango R/T, Citadel, SRT 392, and Durango Hellcat. Every product is filterable by year, make, model, trim, engine, and drivetrain so the correct part ships the first time. Black Ops Auto Works carries 283 Dodge Durango SKUs across performance, suspension, brake, and appearance categories. What This Collection Covers The Dodge Durango is a body on frame three row SUV built on Stellantis Mopar platforms shared in part with the Jeep Grand Cherokee. Its HEMI and Hellcat engine options give it a stronger aftermarket catalog than a typical family SUV, with real performance and suspension part support at every trim level. Durango Trims Cove...

View Dodge Durango Parts & Accessories Products
Exhaust Systems

Exhaust Systems

Performance exhaust systems for cars, trucks, SUVs, and Jeeps are stocked at Black Ops Auto Works. Shop cat-back systems, axle-back systems, turbo-back systems, headers, downpipes, mid-pipes, mufflers, resonators, catalytic converters, exhaust tips, exhaust valve controllers, oxygen sensors, exhaust brakes, and motorcycle and powersports exhausts for Mustang, Camaro, Challenger, Corvette, Silverado, and Super Duty platforms. Every product is filterable by exhaust position, material, pipe diameter, and vehicle year, make, model, and trim so the correct fitment ships the first time. Black Ops Auto Works carries 7,441 exhaust SKUs across every position of the exhaust system. What This Category Covers Exhaust upgrades change sound, appearance, and in some cases power. Exhaust fitment depends on engine, drivetrain, and factory exit position, so confirm the exact platform before ordering any exhaust component. Exhaust Position Cat-back, axle-back, turbo-back, and header-back systems e...

View Exhaust Systems Products
MBRP

MBRP

MBRP exhaust systems for trucks, Jeeps, SUVs, and performance cars are stocked at Black Ops Auto Works. Shop MBRP cat-back systems, axle-back systems, filter-back diesel exhaust, exhaust brakes, downpipes, mid-pipes, mufflers, exhaust tips, and universal tubing and clamps for Ford F-150, Ford Ranger and Ranger Raptor, Jeep Wrangler, Jeep Grand Cherokee SRT, Dodge Challenger HEMI, RAM RHO, Toyota 4Runner and Land Cruiser, Chevy Tahoe, Cadillac Escalade, and Corvette platforms. Every product is filterable by year, make, model, trim, engine, and drivetrain so the correct part ships the first time. Black Ops Auto Works carries 1,059 MBRP SKUs across cat-back, axle-back, filter-back, and diesel exhaust categories. What This Brand Covers MBRP built its reputation in the diesel truck market before expanding into gas trucks, Jeeps, muscle cars, and sports cars. The lineup spans Armor BLK and Armor Pro coated systems, T304 and T409 stainless steel cat-backs, aluminized steel value system...

View MBRP Products
Military & First Responder Discounts

Military & First Responder Discount Program

Black Ops Auto Works proudly honors active duty military, veterans, National Guard, reserves, police officers, firefighters, and EMTs with an exclusive 5% discount on all performance parts and carbon fiber upgrades. Verify instantly and start saving today.

Learn More & Apply

Your cart

×