Russell Performance 91-99 Mitsubishi 3000 GT 2WD Brake Line Kit

Brake line kits and stainless steel brake lines for cars, trucks, SUVs, and performance builds are stocked at Black Ops Auto Works. Shop front brake line kits, rear brake line kits, full vehicle brake line sets, braided stainless lines, DOT approved lines, banjo fitting lines, and vehicle specific replacement lines for Hellcat, Trackhawk, TRX, HEMI, Coyote, and import platforms from Rotora, Goodridge, ISR Performance, StopTech, and Black Ops Auto Works. Every brake line kit is filterable by year, make, model, trim, engine, and drivetrain so the correct length, fitting size, and routing ships the first time. Black Ops Auto Works carries 647 brake line kit SKUs across front, rear, and full vehicle categories. What This Collection Covers Brake lines carry pressurized brake fluid from the master cylinder and ABS module to each caliper. Factory rubber brake lines expand slightly under hard braking pressure, which creates a small amount of pedal sponginess. Stainless steel braided lin...

Brake parts and complete brake kits for cars, trucks, SUVs, Jeeps, and track builds are stocked at Black Ops Auto Works. Shop brake pads, brake rotors, big brake kits, brake calipers, caliper covers, stainless steel brake lines, brake master cylinders, brake hardware, brake drums, brake shoes, hand brakes, and brake adapters for HEMI, Hellcat, Trackhawk, TRX, LS, LT, Coyote, and EcoBoost platforms. Every product is filterable by year, make, model, trim, engine, and drivetrain so the correct part ships the first time. Black Ops Auto Works carries 14,180 brake SKUs across pads, rotors, big brake kits, calipers, and hydraulic categories. What This Category Covers Brakes are the highest-priority safety upgrade on any modified vehicle. Any horsepower, tire, or suspension change increases the demand placed on the braking system, and a correctly matched pad, rotor, line, and fluid package produces measurable improvements in stopping distance, pedal feel, and heat capacity. This collect...

Choose Dodge Stealth gauge mounts and brake-service components by exact vehicle equipment. A pod’s gauge openings and mounting scope are separate from the instruments and signals needed to use it. Single and Dual Gauge Pods AutoMeter offers specified Stealth/3000GT pillar-pod applications with single or dual 52mm gauge arrangements. Compare the exact pod, gauge depth and mounting instructions before choosing instruments. A pod is a mounting component, not an automatic supply of gauges, senders or wiring. Plan the measured signal and supporting electrical or pressure connections separately. Brake Hydraulics and Suspension Service Match a master cylinder to the actual brake layout, actuation, mounting and connections. Keep modified caliper or brake-conversion details available when selecting service components. Strut mounts and protection pieces should follow the suspension currently fitted. Compare position, bearings, hardware and kit contents rather than assuming a mount includes a ...

Find Eagle Talon gauge mounts and engine-service components by generation and installed powertrain. First- and second-generation cabin applications and a DSM 4G63 damper should each follow their own coverage. Gauge Pods by Cabin Application AutoMeter lists separate 1990–1994 and later Eclipse/Talon pod applications. Compare the exact single, dual or triple arrangement, nominal 52mm gauge size and any body exclusions. A pod is a mounting component. Choose instruments by depth and measurement, then plan the sender, signal source and wiring that those gauges require. DSM Damper and Suspension Service The listed Fluidampr component identifies a Mitsubishi 4G63/T DSM engine application. Confirm the engine actually installed and review mounting and accessory-drive requirements rather than assuming every Talon powertrain is identical. Strut mounts and protection pieces follow the actual axle and assembly. Compare bearings, boots, bump stops and hardware independently from the complete damp...

Find Mitsubishi 3000GT intake, gauge-mount and service components by exact production, engine and equipment. Non-turbo intake applications require separate confirmation from turbocharged configurations. Non-Turbo Intake Application Injen’s 3000GT non-turbo instructions identify a V6 non-turbo installation. Match the exact system number, production and supported sensor/mounting arrangement. Confirm air-meter connections, hoses and required installation parts. Do not extend non-turbo kit support to a turbocharged car or an engine conversion. Gauge Pods and Brake Components Compare AutoMeter single/dual gauge pods by actual gauge diameter, depth, mounting location and body application. Review gauges, senders and wiring separately from the pod. For a Stealth master-cylinder reference, require explicit 3000GT support and match bore, mounting, outlets and brake configuration. Parking-brake shoes need independent drum/hat dimensions and hardware checks. Choose Your Part Identify exact pro...

Compare Mitsubishi Eclipse intakes, gauge mounts and engine accessories by exact generation, engine and transmission. Turbocharged 2.0L, other four-cylinder and V6 applications require separate systems. Intake System by Engine and Transmission Match the exact Injen number to engine, production and transmission. The displayed 2.4L manual-transmission system is a different application from 2.0L turbo, 3.0L V6 or 3.8L V6 references. Confirm sensor connections, hoses, brackets and installation layout. Compare short-ram and cold-air versions by complete supported application rather than finish color. Gauge Pods and Engine Covers For the 1995–1999 triple pillar pod reference, confirm body application and the stated convertible exclusion. Match gauge diameter, depth and wiring/hose routing separately. A turbo spark-plug-wire cover requires the exact engine and attachment layout. Floor mats need their own supported footwell shape, retention and pedal clearance. Choose Your Part Identify ex...

Find Plymouth Laser engine, gauge-mounting and suspension parts for the installed powertrain and chassis. Separate a 4G63/T engine component from body-specific interior and damper applications. Engine Damper and Gauge Mounting For the Fluidampr 4G63/T DSM reference, confirm exact engine, crank attachment and accessory-drive compatibility. Internally balanced application wording does not establish every Laser engine. AutoMeter’s 1990–1994 Eclipse/Talon/Laser dual A-pillar pod supports two 2-1/16-inch gauges. Review gauge depth, mounting and instrument requirements separately from the pod itself. Suspension and EFI Packages Compare Excel-G and AGX rear references using exact drivetrain/chassis coverage, mounts and travel. Check mount, bearing, boot and damper contents separately. An EFI nitrous package needs confirmed engine/fuel-system support and specified controls. Bottle choices and advertised system range do not establish complete installation suitability or guaranteed output. Ch...

Shop Russell automotive hose, hose ends, fittings, direct-fit brake lines, fuel-system components, and fluid-transfer accessories by exact manufacturer part number and verified application.Choose Your Part Match the complete AN size, thread standard, flare or seal type, hose construction, pressure, temperature, and fluid compatibility For direct-fit brake and fuel-line kits, verify the complete year, make, model, submodel, drivetrain, and factory equipment Confirm the exact manufacturer part number, included components, routing clearance, and required mating parts before ordering Frequently Asked QuestionsAre all Russell products selected by vehicle fitment?No. Direct-fit line kits use listed vehicle applications, while universal plumbing parts are selected by dimensions, thread, AN size, seal type, pressure, temperature, and fluid compatibility.Can Russell hose and fittings from different product families be mixed?Only combine components when Russell confirms that the hose construc...