Click to zoom in
SPC Performance Replacement Ball Joint Kit (Use w/ PN 25685), manufacturer part number 35106, is a vehicle-specific ball joints product for professional suspension and wheel-alignment service. Select this exact part by its correction range, mounting position, dimensions, and verified application rather than by appearance alone.
Key Features
- Exact SPC manufacturer part number 35106
- Part number found in the current SPC 2026/27 Total Wheel Alignment SourceBook
- Alignment ball-joint component selected by exact joint, position, and adjustment requirements
- Professional pressing, torque, alignment, and clearance checks are required
- Direct Replacement – Fits SPC Adjustable Upper Control Arms (25685 & 35685)
- Maintenance-Free Design – No greasing or adjustments needed after installation
Fitment
| Years | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | F-150 |
Specifications
| Brand | SPC Performance |
|---|---|
| Manufacturer Part Number | 35106 |
| Product Type | Ball Joints |
| Fitment Type | Vehicle specific |
| Condition | New |
| MAP Status | Manufacturer MAP protected |
What's Included
One new SPC Performance ball joints item identified by manufacturer part number 35106. Hardware, companion components, and service tools are included only when expressly stated.
About SPC Performance
Specialty Products Company develops professional wheel-alignment parts and tools for passenger cars, light trucks, heavy-duty vehicles, and performance applications. SPC products are intended for professional installation and alignment service.
Related SPC Performance Products
- Shop all SPC Performance products
- SPC Performance 05-07 Ford Five Hundred / 08-09 Ford Taurus Rear Upper Ball Joint
- SPC Performance 2016+ Honda Civic Replacement Lower Ball Joint (Does Not Fit Civic Type R)
- SPC Performance 05-10 Jeep Grand Cherokee Adjustable Ball Joint (1.25deg.)
Frequently Asked Questions
How do I confirm SPC 35106 fits my vehicle?
Match the full year, make, model, mounting position, suspension configuration, and all manufacturer application notes. The manufacturer part number must also match exactly.
Is an alignment required after installation?
Yes. Suspension geometry must be measured and adjusted to the vehicle manufacturer's specifications after installation.
What else should be inspected during installation?
Inspect related joints, bushings, fasteners, tires, wheel clearance, ride height, and mounting surfaces. Replace damaged companion parts before the final alignment.
Installation
Follow the current SPC instructions for part number 35106. Confirm vehicle configuration, component orientation, clearances, fastener condition, torque specifications, and required alignment procedure before use. Professional installation and a complete post-installation alignment are recommended.
Ball Joints
Ball joints restore controlled suspension movement and steering geometry on trucks, SUVs, muscle cars, Jeeps, and daily drivers. Shop OE-replacement and heavy-duty upper and lower ball joints for Silverado, F-150, Ram, Wrangler, Tacoma, 4Runner, Camaro, Mustang, Civic, Jeep, GM HD, and Ford Super Duty applications. Black Ops Auto Works carries 99 ball-joint SKUs across pressed-in replacements, bolt-in service kits, heavy-duty off-road upgrades, control-arm replacement joints, boots, and specialty steering components. Filter by year, make, model, trim, engine, and drivetrain before ordering. What Ball Joints Do Ball joints connect the control arm to the steering knuckle while allowing the suspension to move and the wheel to steer. Worn joints can cause steering looseness, uneven tire wear, clunks, and poor alignment stability. Upper and Lower Locations Many vehicles use upper and lower ball joints, but the configuration varies by suspension design. Verify the exact axle position ...
View Ball Joints Products
SPC Performance
Shop SPC Performance alignment parts and professional service tools by exact manufacturer part number, including adjustable control arms, ball joints, camber and caster kits, toe components, bushings, shims, alignment hardware, and specialty tools.Choosing the Correct SPC Performance Part Match the complete SPC manufacturer part number Confirm the full year, make, model, mounting position, suspension configuration, and application notes Compare correction range, component dimensions, material, interface, and included hardware Plan for professional installation and a complete post-installation alignment Vehicle FitmentVehicle-specific parts use canonical year, make, model, and only materially required true submodel records for Convermax filtering. Professional tools and specification-matched products are not assigned fabricated vehicle fitment.Related SPC Performance Products All SPC Performance products SPC EZ Cam XR 12mm bolts SPC front adjustable upper control arms SPC cam knockou...
View SPC Performance Products
Suspension
Suspension parts and complete kits for cars, trucks, SUVs, Jeeps, and off-road builds are stocked at Black Ops Auto Works. Shop coilovers, lowering springs, lift kits, leveling kits, shocks and struts, sway bars, control arms, tie rods, ball joints, bushings, chassis bracing, alignment hardware, air suspension, and complete stage kits from Bilstein, KW, Ohlins, Fox, KING, ICON, BC Racing, Silvers, Eibach, H&R, Swift Springs, Whiteline, Energy Suspension, Moog, SPC Performance, Rough Country, ReadyLIFT, BDS, Skyjacker, Air Lift, Firestone, and Black Ops Auto Works. Start with a matched shock and spring package or a full coilover kit, then layer in sway bars, chassis bracing, and camber adjustment hardware. Every part is filterable by year, make, model, trim, and drivetrain to confirm fitment before ordering. What This Category Covers Suspension is the highest-leverage handling upgrade on any vehicle. A properly matched shock, spring, and sway bar package produces measurable i...
View Suspension Products