SuperPro 2008 Pontiac G8 Base Front Radius Arm Kit

Shop alignment components, camber kits, caster kits, and adjustable control arms at Black Ops Auto Works. Find vehicle-specific parts for correcting suspension alignment or preparing a performance setup, including toe links, adjustment cams, camber plates, and replacement mounts. Choose components based on your vehicle, suspension configuration, and measured alignment needs. Camber, Caster, and Toe Correction Camber describes the inward or outward tilt of a wheel when viewed from the front. Caster describes the steering axis angle when viewed from the side. Toe describes whether the wheels point inward or outward when viewed from above. Each measurement has a different role, so the right correction part depends on which angle needs adjustment. This collection includes options from Black Ops Auto Works, AAD Performance, SPC Performance, Eibach, SuperPro, Whiteline, and other suspension brands. Adjustment capability varies by product. A camber kit does not automatically provide caster...

Find Chevrolet Caprice parts with the generation and body identified first. Window accessories for later cars, classic brake assemblies and electronic control accessories have different application requirements. Body and Brake Generations Match window deflectors to the exact doors, glass and installation method. A four-piece set should be checked for the windows covered rather than selected from the Caprice name alone. For brake service, identify the installed axle, rotor or drum dimensions and caliper. Keep conversion references where hubs, brakes or suspension have changed. Cab and Accelerator Interfaces Floor mats need measured contours, retention and clearance around the pedals and seats. Universal coverage does not establish a molded sedan or wagon floor fit. Pedal-response accessories need the actual accelerator connector and explicit vehicle coverage. Compare phone or display requirements separately; a response change does not establish additional engine horsepower. Choose Yo...

Control arms for lifted trucks, SRT and Hellcat platforms, and off-road builds are stocked at Black Ops Auto Works. Shop tubular steel upper control arms, billet adjustable control arms, rear toe links, camber arm kits, and vehicle-specific control arm sets for Jeep Grand Cherokee and Trackhawk, Dodge Durango, Charger, Challenger, 300, and Magnum, Toyota 4Runner and FJ Cruiser, Lexus GX460 and GX470, Ford Mustang, and GM 1500 trucks. Every product is filterable by year, make, model, trim, and lift height so the correct control arm ships the first time. Black Ops Auto Works carries 789 control arm SKUs across upper, lower, adjustable, and toe link categories. What This Collection Covers Control arms connect the wheel hub and knuckle assembly to the vehicle frame and control wheel travel through compression and droop. Worn OEM control arms with loose ball joints or deteriorated bushings cause vague steering, uneven tire wear, and handling inconsistency. This collection covers arm ...

Find Pontiac G8 intake, engine-drive and accessory parts using exact engine and installed equipment. Separate the 6.0L intake application from other powertrain and converted-brake references. Intake and Pedal-Response Selection Injen’s PF7040 instructions identify the 2008–2009 G8 V8 6.0L application. Review sensor/breather connections, mounting and complete kit contents for the actual car. For PedalMonster, verify the TE Connectivity MT2 six-way harness and exact phone/iDash package. It changes throttle responsiveness rather than adding horsepower or torque. Engine Dampers and Brake Interfaces Compare ATI or Fluidampr references using exact crank/balance and accessory-drive alignment. Groove count, pulley offset and any auxiliary belt/drive requirements need part-specific confirmation. A Camaro SS rotor reference requires supported installed G8 caliper/hub geometry. Match deflectors by production/body and mounting method; review drill/pin tools separately from complete dampers. Cho...

Shop SuperPro polyurethane suspension bushings, control arms, sway bars, end links, alignment components, spring isolators, differential mounts, and chassis service parts by exact manufacturer part number and verified vehicle application.SuperPro Product Families Polyurethane suspension and sway-bar bushings Control arms, ball joints, end links, and alignment components Sway bars, spring isolators, shock mounts, and chassis supports Differential, transmission, steering, and universal service components Choose Your PartConfirm the exact part number, year, make, model, mounting position, bar diameter, bushing dimensions, suspension configuration, and every manufacturer application note. Confirm every engine, drivetrain, chassis and factory-equipment requirement in the product application notes.About SuperProSuperPro engineers polyurethane suspension and chassis components for street, performance, and off-road vehicles, with application-specific designs and exact dimensional requiremen...

Suspension parts and complete kits for cars, trucks, SUVs, Jeeps, and off-road builds are stocked at Black Ops Auto Works. Shop coilovers, lowering springs, lift kits, leveling kits, shocks and struts, sway bars, control arms, tie rods, ball joints, bushings, chassis bracing, alignment hardware, air suspension, and complete stage kits from Bilstein, KW, Ohlins, Fox, KING, ICON, BC Racing, Silvers, Eibach, H&R, Swift Springs, Whiteline, Energy Suspension, Moog, SPC Performance, Rough Country, ReadyLIFT, BDS, Skyjacker, Air Lift, Firestone, and Black Ops Auto Works. Start with a matched shock and spring package or a full coilover kit, then layer in sway bars, chassis bracing, and camber adjustment hardware. Every part is filterable by year, make, model, trim, and drivetrain to confirm fitment before ordering. What This Category Covers Suspension is the highest-leverage handling upgrade on any vehicle. A properly matched shock, spring, and sway bar package produces measurable i...