Sold out
Click to zoom in
SKU: Z_BB_G2
Burn Box G2
Note: 2018+ models require the use of a Double Bypass harness.
Line Lock:
Using one of the cruise control buttons/lever (depending on vehicle model), the BurnBox G2 uses the ABS valves to hold the vehicle with the front brakes so you can hit the gas and do a perfect burnout as long as you wish, with no wear on the rear brakes. No plumbing is required! This is a perfect alternative to the traditional plumbed-in solenoid type line lock/roll control. Super simple and cannot be detected! Gone are the days of plumbing in external solenoids in the brake system, having to bleed the brakes and run wires through the firewall to a switch.
Light Show:
Using the keyfob or steering wheel buttons, turn on a light show that flashes the exterior lights in 9 different patterns.
6 pre-set patterns
3 customizable make-your-own patterns
Z Automotive Programming Utility (for Windows PCs only) is used for firmware updates and for configuration:
– Choose which exterior lights are included in the patterns
– Create your own patterns
– Choose which patterns to include or remove
– Choose which pattern to start with
– Save custom shows to file or load them from a file
– Can be enabled for in-motion use for authorized users and off-road parade use; email tech support for instructions
Button Remapping:
Use the Adaptive Cruise distance buttons (when ACC is off), or install “Aux” buttons or viper cruise button bank and map the buttons for quick access to BurnBox functions.
INSTALLATION IS A SIMPLE MATTER OF PLUGGING IT INTO THE DIAGNOSTIC OBD2 PORT WHICH IS LOCATED ABOVE THE PARKING BRAKE.
The following vehicles require a Security Gateway Bypass Module:
- 2018-2023 Dodge Durango
- 2018-2022 Jeep Grand Cherokee
This bypass is required when installing the Tazer in a vehicle on the above list.
Additionally, the Security Gateway Bypass can be used in any 2018+ FCA vehicle except for Cherokee L/WL or Grand Cherokee L/WL.
The Double-Bypass is a security gateway bypass for the following vehicles:
2018-2023 Dodge Charger
2018-2023 Dodge Challenger
2018-2023 Chrysler 300
This bypass is required when installing the Tazer in a vehicle on the above list.
The Double-Bypass can be used in older Chargers, Challengers and 300S to relocate the Tazer to the trunk.
Fitment:
|
MAKE |
MODEL |
YEAR |
|
Dodge |
Challenger |
2015 - 2021 |
|
Dodge |
Charger |
2015 - 2021 |
Dodge Challenger Parts & Accessories for Ultimate Performance and Style
Dodge Challenger parts and accessories for SXT, GT, R/T, Scat Pack, SRT, Hellcat, Hellcat Redeye, and Demon trims are stocked at Black Ops Auto Works. Shop cold air intakes, cat back exhaust systems, lowering springs, coilovers, billet control arms, differential braces, oil catch cans, stainless brake lines, carbon fiber hoods, splitters, spoilers, and driveshaft support upgrades for the 3.6L Pentastar, 5.7L HEMI, 6.4L HEMI, and 6.2L supercharged HEMI engines. Every product is filterable by year, make, model, trim, engine, and drivetrain so the correct part ships the first time. Black Ops Auto Works carries 610 Dodge Challenger SKUs across engine, exhaust, suspension, braking, and exterior styling categories. What This Collection Covers The Dodge Challenger's E-body revival spans the 2008 to 2023 model run, from the base SXT and Pentastar V6 through the R/T 5.7L HEMI, Scat Pack 392, SRT Hellcat, Hellcat Redeye, and the limited run Demon and Demon 170. This collection brings toge...
View Dodge Challenger Parts & Accessories for Ultimate Performance and Style Products
Interior Parts & Accessories
Interior parts and accessories for cars, trucks, SUVs, and Jeeps are stocked at Black Ops Auto Works. Shop gauges and gauge pods, dash and interior trim, shift knobs and shifters, steering wheels, seats and race seats, seat belts and harnesses, roll cage components, floor mats, programmers and tuners, and racing safety gear for Hellcat, Trackhawk, TRX, HEMI, LS, LT, Coyote, and EcoBoost platforms. Every interior product is filterable by year, make, model, trim, and application so the correct part ships the first time. Black Ops Auto Works carries 5,234 interior SKUs across dash trim, seating, safety, electronics, and tuning categories. What This Category Covers Interior parts and accessories span daily comfort upgrades and dedicated racing safety equipment. This collection ranges from simple dash badges and floor mats to full roll cage components, race seats, and harness bars for track-prepped builds, along with electronic tuning products like programmers and performance monitor...
View Interior Parts & Accessories Products
Programmers & Chips
Programmers and tuning chips for gas and diesel trucks, cars, and SUVs are stocked at Black Ops Auto Works. Shop handheld tuners, ECU programmers, performance chips, and custom tuning devices built to unlock horsepower, torque, and fuel economy gains. Every product is filterable by year, make, model, trim, engine, and drivetrain so the correct part ships the first time. Black Ops Auto Works carries 534 programmer and chip SKUs spanning handheld tuners, modules, and custom-tune devices. What This Category Covers The Programmers and Chips category covers handheld programmers, in-line performance chips, and custom tuning devices that adjust engine parameters such as fuel, timing, and shift points. Coverage spans mild economy-focused tunes through aggressive race tunes for built engines. Categories Included Handheld tuners and programmers, diesel performance modules, in-line piggyback chips, custom tuning devices, and programmer accessories such as cables and monitors. Handheld Tune...
View Programmers & Chips Products
Programmers & Tuners
Programmers & Tuners parts and accessories for Ford EcoBoost, RAM and Jeep HEMI, Cummins diesel, Subaru WRX and STI, Volkswagen GTI and Golf R, Audi, Porsche, Mitsubishi Evo, and standalone ECU builds are stocked at Black Ops Auto Works. Shop ECU programmers, handheld tuners, AccessPORT devices, custom tuning hardware, data monitors, calibration tools, diagnostic devices, throttle controllers, and vehicle-specific tuning solutions for street performance, reliable repairs, and application-specific upgrades. Every product is filterable by year, make, model, trim, engine, and drivetrain so the correct part ships the first time. Black Ops Auto Works carries 263 collection SKUs across fitment, electrical or mechanical function, materials, installation needs, and performance goals. Vehicle-Specific Handheld Tuning A handheld programmer or tuner can provide approved calibrations, data access, and selected configuration features for supported vehicles. Always choose by exact model y...
View Programmers & Tuners Products
Tazer
Tazer parts and accessories are stocked at Black Ops Auto Works. Tazer electronics for Jeep, Ram and Dodge platforms are stocked at Black Ops Auto Works. Shop Tazer JL, Mini and DT programmers, locker controls, auxiliary switch kits, harnesses and vehicle specific modules. Every product is filterable by year, make, model, trim, engine and drivetrain so the correct part ships the first time. Black Ops Auto Works carries 36 Tazer SKUs across installation, service and performance needs. What This Tazer Collection Covers Tazer products support supported FCA vehicle personalization, feature control and accessory integration. The catalog includes equipment for Wrangler, Gladiator, Grand Cherokee, Ram, Charger and Challenger applications. Tazer Programmers for FCA Platforms Tazer programmer modules can provide supported feature settings and vehicle personalization for a listed Jeep, Ram or Dodge application. Vehicle Specific Programming Tazer JL, Mini and DT products serve different ve...
View Tazer Products