Ticon Industries Sequence Manufacturing SS304 5in Teardrop Exhaust Tip

The Clean, Aggressive Finish Your Exhaust System Deserves at the Exit Point

The Ticon Industries TIC903-03271-1000 is a 5-inch SS304 stainless steel teardrop exhaust tip produced under Ticon's Sequence Manufacturing line. Built from 304-grade stainless steel and finished to a polished exterior, the teardrop shape delivers an assertive, purposeful look that stands apart from round or slash-cut alternatives. The TIC903-03271-1000 is a weld-on application designed for builders and fabricators who want a quality tip that holds its finish under the sustained heat and condensation cycle of an exhaust system. SS304 is the benchmark material for exhaust tips: highly resistant to corrosion, blue discoloration, and surface scaling at sustained exhaust gas temperatures.

Key Features

• SS304 stainless steel construction for maximum corrosion resistance and long-term finish retention
• 5-inch teardrop profile for an aggressive, distinctive exhaust exit appearance
• Polished exterior finish that resists bluing and scaling at sustained exhaust temperatures
• Weld-on installation for a permanent, rattle-free fitment with no clamps or hardware
• Manufactured under Ticon Industries' Sequence Manufacturing program for consistent dimensional tolerances
• Compatible with high-flow aftermarket exhaust builds, custom fabrications, and replacement tip applications
• Universal fitment for use across a wide variety of performance vehicle applications

Specifications

What's Included

• 1x Ticon Industries TIC903-03271-1000 SS304 5-inch teardrop exhaust tip

About Ticon Industries

Ticon Industries is a US-based manufacturer specializing in titanium and stainless steel exhaust components, fabrication hardware, and precision-cut tubing for the performance aftermarket. Their Sequence Manufacturing line produces stainless steel tips, flanges, and exhaust hardware to consistent dimensional specs, making them a preferred source for custom fabricators and exhaust shops requiring reliable, quality components. Ticon products are used across motorsport, track day builds, and high-performance street applications.

Frequently Asked Questions

The TIC903-03271-1000 is a weld-on tip. The inlet diameter should be confirmed against your exhaust pipe outer diameter before ordering. Contact Ticon Industries or your dealer to confirm the specific inlet dimension for this part number before welding.

The TIC903-03271-1000 is a weld-on application. It is intended for permanent installation by welding onto the end of the exhaust pipe. No clamps, U-bolts, or additional hardware are included or required. Proper fitment should be confirmed before welding.

SS304 contains a higher chromium and nickel content than SS409, giving it superior corrosion resistance, a brighter finish, and better resistance to the bluing and discoloration that occurs when exhaust tips are exposed to sustained heat. SS409 is more commonly used in mufflers and mid-pipes where cost matters more than appearance. For visible exterior tips, SS304 is the preferred choice.

The TIC903-03271-1000 is a universal weld-on tip. Fitment depends on matching the tip's inlet to your exhaust pipe outer diameter and confirming adequate clearance for the 5-inch teardrop profile within your vehicle's bumper cutout or rear fascia opening. Measure your pipe OD and bumper opening before ordering.

SS304 holds its polished appearance significantly better than lower-grade stainless alloys under normal use. Some light discoloration near the inlet from exhaust gas heat is normal on all stainless tips over time. Regular cleaning with a stainless-safe polish maintains the appearance. Avoid abrasive cleaners that can scratch the polished surface.

Yes. SS304 stainless steel is suitable for diesel exhaust applications. The tip will be exposed to soot and carbon particulates in diesel exhaust, which can accumulate on the interior surfaces. This is normal and does not affect the structural integrity or exterior finish of the tip.

TIG welding is the preferred method for stainless steel exhaust tips as it produces clean, precise welds that maintain the stainless finish in the weld zone. Back-purging with argon gas during welding prevents oxidation on the inner weld bead. MIG welding is possible but requires stainless wire and may produce more heat discoloration at the weld joint. A professional exhaust shop or fabricator can handle this installation.

Ticon Industries and the Sequence Manufacturing line offer exhaust tips in multiple outlet sizes and profiles. Contact your dealer or visit ticonindustries.com to review available teardrop and other profile options if the 5-inch size does not match your application.

Installation Overview

1. Confirm the tip inlet diameter matches your exhaust pipe outer diameter before beginning
2. Clean and degrease the end of the exhaust pipe where the tip will be welded
3. Slide the tip over the pipe end and adjust the angle and position to your desired orientation
4. Tack weld in at least two opposite positions to hold the tip in place before final welding
5. Complete the weld using TIG with stainless filler rod, back-purging with argon to protect the inner bead from oxidation
6. Allow to cool fully before inspecting the weld for full penetration and uniform bead
7. Polish the weld area if desired using a fine stainless polishing compound to blend the finish