Ticon Industries Titanium Exhaust, V-Bands & Fabrication Components

What This Collection Covers

Ticon Industries supplies materials and components used to build lightweight, durable exhaust and charge-pipe systems. The collection supports custom turbo manifolds, downpipes, intercooler plumbing, cat-back fabrication and race-car exhaust work across many engine platforms.

Titanium Exhaust Tubing

Titanium tubing provides a high strength-to-weight ratio for builders who want to reduce weight in a race or high-performance exhaust system. Select the correct outside diameter, wall thickness and straight or bend length before planning the cut list.

Mandrel Bends and Straight Sections

Mandrel bends preserve a consistent internal diameter through the curve, while straight sections complete the routing. Combine them around suspension, driveline, heat shielding and body clearance.

V-Bands and Fabrication Flanges

V-band assemblies make it easier to service sections of a custom exhaust or turbo system. Tial-style flanges, two-bolt flanges and weld-on components help match the exhaust path to the wastegate, blow-off valve or turbo hardware.

Sealing and Alignment

A clean, aligned flange face and correct clamp are important for leak-free service. Plan joint location so the system can be removed without interference.

Turbo and Charge-Pipe Components

Silicone couplers, reducers, aluminum tubing and clamps support custom intercooler and turbo plumbing. Match diameter, bead retention, pressure demands and temperature exposure to the intended system.

Bungs and Sensor Provisions

O2 sensor bungs and weld-on brackets add essential measurement and mounting points. Locate sensors where heat, flow direction and wiring clearance support accurate operation.

Race and Street Exhaust Fabrication

Ticon components work for lightweight race exhausts as well as street-driven turbo and V8 builds. A proper plan considers noise, heat, catalyst placement, flex, service access and every chassis contact point.

Hangers and Support

Exhaust hangers and brace brackets keep the system supported as it expands and moves with the drivetrain. Use adequate support near heavier mufflers, tips and long tubing runs.

Material Selection and Welding

Titanium, stainless and aluminum each need compatible welding process, filler material and joint preparation. Do not mix materials without considering corrosion, weldability, temperature and service conditions.

Measuring Before Ordering

Measure tubing outside diameter, wall thickness, bend radius, clamp size and flange pattern before ordering. A precise mockup saves material and rework.

Top Product Lines

• Titanium straight tubing
• Titanium mandrel bends
• V-band flanges
• V-band clamps
• Tial-style flanges
• O2 sensor bungs
• Titanium exhaust hangers
• Weld-on brace brackets
• Silicone couplers
• Silicone reducers
• Aluminum tubing
• 304 stainless exhaust tips
• Three-bolt gaskets
• Mikalor Supra clamps
• Turbo fabrication hardware

How to Choose the Correct Part

• Measure the required tubing outside diameter and wall thickness.
• Plan bend radius and centerline geometry before ordering.
• Choose titanium, stainless or aluminum for the correct temperature zone.
• Confirm flange pattern for the turbo, wastegate or exhaust section.
• Match V-band clamp size to the flange diameter.
• Add bungs for O2 sensors and other required instrumentation.
• Use silicone couplers only where the temperature and pressure suit them.
• Plan hanger locations to support heavy sections and manage movement.
• Confirm welding equipment and filler are compatible with the chosen material.
• Mock up the system for chassis, driveline and heat clearance before final welding.

Common Questions

What does Ticon Industries make?

Ticon Industries makes titanium tubing, bends, V-band flanges, bungs, clamps, silicone couplers and other exhaust and fabrication components.

Why use titanium exhaust tubing?

Titanium can reduce exhaust-system weight while providing strength and heat resistance for suitable race and performance applications.

What is a V-band flange used for?

A V-band flange creates a removable joint between exhaust or turbo components, making service and system changes easier.

Can Ticon parts be used for turbo charge pipes?

Ticon silicone couplers, reducers, aluminum tubing and clamps can support custom charge-pipe work when sizes and ratings match the system.

Do I need special tools to weld titanium?

Titanium welding requires appropriate equipment, joint preparation and shielding practices. Consult an experienced fabricator if you are not equipped for the material.

How do I choose tubing diameter?

Choose diameter based on engine output, turbo or exhaust design, available clearance and the components being connected.

What are O2 sensor bungs for?

O2 sensor bungs provide a threaded mounting location for oxygen sensors used by the engine management system or data logging equipment.

Can titanium and stainless be joined together?

Joining dissimilar metals requires careful planning for welding compatibility, corrosion and heat cycling. Consult a qualified fabricator for the specific application.

Are silicone couplers suitable for exhaust tubing?

Silicone couplers are intended for intake and charge-pipe plumbing, not hot exhaust tubing, unless a product specifically states otherwise.

How do I plan a custom exhaust build?

Measure the vehicle, list every tubing size and joint, plan serviceable V-band locations, account for heat and movement, then mock up before final welding.

Why Buy from Black Ops Auto Works

Black Ops Auto Works stocks 168 Ticon Industries fabrication component SKUs with real fitment data, competitive pricing and support from staff who build these vehicles themselves. Products are filterable by year, make, model, trim, engine and drivetrain to confirm the correct application before ordering.

For focused shopping, browse our Cat Back Exhaust Systems, Downpipes, Mid Pipes, Connecting Pipes, Flanges, Fabrication, Stainless Bros.