SKU: TS-1-6262B-VB082E | UPC: 9329677028966
Turbosmart Oil Cooled 6262 V-Band Inlet/Outlet A/R 0.82 External Wastegate TS-1 Turbocharger - Universal
The Turbosmart TS-1 6262 turbocharger delivers quick spool and high power for performance builds on inline-6 engines like Toyota 2JZ-GTE and Nissan RB26DETT. This oil-cooled unit features V-band housings for easy installation and A/R 0.82 turbine housing with external wastegate port. It provides 450-850HP potential with low backpressure and fast transient response across 2.0L-4.0L engines.
Key Features
- Lightweight Design: Stainless steel investment cast turbine housing and ultra-low rotating mass shaft assembly reduce weight to 16.5 lbs for faster spool than heavier competitors.
- Compressor Wheel: 62mm inducer / 82mm exducer forged milled wheel with aggressive aerodynamics supports 60+ lb/min flow at lower RPMs.
- Turbine Wheel: 62mm T14 Inconel wheel maintains power at high loads with extended tip height for durability under boost.
- V-Band Housings: Inlet and outlet V-band clamps simplify plumbing and allow quick disassembly for maintenance.
- Oil Cooled CHRA: Proprietary journal bearing and main shaft combo ensures reliable transient response without water cooling.
Product Notes
- Requires -4AN oil feed line and -10AN drain line. use Turbosmart fittings for best results.
- Break-in oil and 20 minutes easy driving recommended after install.
- Ships in protective foam-lined box. inspect for damage upon receipt.
Installation Notes
- Professional installation recommended.
- Custom exhaust manifold and downpipe required for V-band flanges (3.0 inch nominal).
- Compatible with Tial MVS or V-band external wastegates. position actuator away from heat sources.
This Part Fits
| Year | Make | Model | Submodel |
|---|---|---|---|
| 1993-1998 | Toyota | Supra | 2JZ-GTE Twin Turbo |
| 1993-2002 | Toyota | Supra | 2JZ-GTE Single Turbo Conversion |
| 1989-1998 | Nissan | Skyline | RB26DETT |
| Universal | Chevrolet | LS1/LS3 | Custom Swap |
| Universal | Honda | K20/K24 | High HP Build |
Why Choose Turbosmart?
- Motorsport-proven in drag racing and circuit cars worldwide.
- Investment cast housings resist cracking under extreme heat cycles.
- Engineered in Australia for reduced lag and sustained high-flow performance.
Frequently Asked Questions
-
Q: What engines is this turbo suited for?
A: Fits 4-6 cylinder performance builds 2.0L-4.0L including Toyota 2JZ-GTE, Nissan RB26DETT, and LS swaps with custom manifolds. -
Q: Is this turbo water cooled?
A: Oil cooled only with advanced journal bearing system. no water ports needed, simplifies plumbing. -
Q: What is the warranty and install tips?
A: Turbosmart 2-year warranty with registration. use assembly lube on install and monitor EGTs under 1650F.
Shipping & Handling
- Method: UPS Ground or FedEx Ground
- Availability: In stock - ships same or next business day
- Packaging: Secure double-wall box 17in x 15in x 15in
- Weight: 16.5 lbs product / 20 lbs shipping
Forced Induction
Forced induction is the fastest way to add real power to an engine without adding displacement, and this collection covers the full range of turbocharger, supercharger, intercooler, and boost control hardware needed to build a reliable boosted platform. Whether you are running a factory turbo upgrade, swapping to a bigger frame turbocharger, adding a centrifugal or roots style supercharger, or dialing in a nitrous system for a quick shot of extra power, you will find the components here to build and support the setup correctly. Every part in this collection is organized by system type so you can move from a stock turbocharger to a properly supported forced induction build in one place. Intercoolers, wastegates, blow off valves, boost controllers, and water meth injection components are all included alongside the core turbo and supercharger hardware so the entire boost system can be sourced together. What This Category Covers This collection includes turbochargers, turbo kits, s...
View Forced Induction Products
Turbochargers
Turbochargers parts and accessories are stocked at Black Ops Auto Works for LS swap, Coyote, 2JZ, Subaru EJ, Honda K series, Ford EcoBoost, Bronco and Ranger Raptor, Cummins, Duramax and Powerstroke diesel truck builds. Shop bolt on turbochargers, universal turbochargers, replacement turbos, upgraded turbos, compressor housings, turbine housings and turbo installation parts with vehicle specific fitment data for confident ordering. Every product is filterable by year, make, model, trim, engine, and drivetrain so the correct part ships the first time. Black Ops Auto Works carries 180 Turbochargers SKUs across bolt on turbos, universal turbos, diesel upgrades, compressor configurations, and supporting components. What This Turbochargers Collection Covers Bolt On and Universal Turbochargers This collection includes vehicle specific replacement and upgrade turbochargers plus universal units for fabricated builds. Select by engine, manifold flange, turbine housing, compressor size, f...
View Turbochargers Products
Turbochargers & Components
Turbochargers and turbo components for import, domestic, and European performance builds are stocked at Black Ops Auto Works. Shop complete turbochargers, turbo rebuild kits, wastegates, turbo manifolds, and turbo hardware for naturally aspirated conversions and turbo upgrades alike. Every product is filterable by year, make, model, trim, engine, and drivetrain so the correct part ships the first time. Black Ops Auto Works carries 565 turbocharger SKUs spanning complete units, rebuild kits, and supporting hardware. What This Category Covers The Turbochargers and Components category covers complete turbocharger units, upgraded drop-in turbos, turbo rebuild and repair kits, wastegates, and the supporting hardware needed to install or upgrade a turbocharger. Coverage spans stock-replacement turbos through big single and twin-turbo setups for serious horsepower goals. Categories Included Complete turbochargers, drop-in and hybrid turbo upgrades, turbo rebuild kits, cartridges, waste...
View Turbochargers & Components Products
Turbosmart
Turbosmart forced induction accessories for turbocharged platforms are stocked at Black Ops Auto Works. Shop external and internal wastegates, blow off valves, electronic boost controllers, boost tee kits, and turbo plumbing hardware for Mercedes-Benz AMG, BMW, Jeep Wrangler JL 2.0T, Ram 1500 Hurricane 3.0L, Honda Civic Type R, and other turbocharged engines. Every product is filterable by year, make, model, trim, engine, and drivetrain so the correct part ships the first time. Black Ops Auto Works carries 628 Turbosmart SKUs across wastegates, blow off valves, boost control, and turbo hardware categories. What This Collection Covers Turbosmart designs boost control and turbo management hardware for any platform running forced induction, from factory turbocharged daily drivers to dedicated race builds. This collection brings together fitment verified wastegates, blow off valves, and boost controllers spanning modern factory turbo platforms like the Jeep Wrangler JL 2.0L Turbo an...
View Turbosmart Products


