UMI Performance 78-88 GM G-Body Front 2in Lowering Springs

Choose Buick Regal parts by generation, body and installed equipment. Classic brake conversions and later hood, window or pedal accessories need separate application references. Brake Upgrade and Chassis Scope For a complete brake kit, confirm exact chassis, spindle, axle and hydraulic requirements. Compare calipers, brackets, rotors, hoses and hardware supplied. Check wheel clearance with the manufacturer’s template against the actual wheel design. Wheel diameter alone does not establish spoke and barrel clearance. Body Accessories and Pedal Interfaces Hood protectors and window deflectors need exact body and front-end production coverage. Compare fascia mounting, in-channel or outside-mount installation and piece count. Pedal-control kits need the actual accelerator connector and vehicle application. Choose phone or display equipment by the required interface; response adjustment does not establish an engine-output gain. Choose Your Part Identify generation, body and engine. Conf...

Choose Chevrolet El Camino parts by generation, brake equipment and dashboard layout. Front and rear brake kits and digital instrument components have different mounting and companion-part requirements. Brake Kits by Chassis and Axle Listings distinguish later Malibu/El Camino/Monte Carlo/Regal brake applications from earlier GM chassis kits. Confirm exact year, front spindle and rear axle rather than extending a shared platform title. Compare front and rear kit contents separately. Check rotor size, hub or housing-end requirements and the actual wheels using the manufacturer’s clearance templates. Hydraulics and Instrument Installation Brake conversions need compatible hydraulic equipment and pedal-system requirements from the kit instructions. Record any axle or spindle changes for later service. A digital instrument display requires the specified dash application, wiring and signal inputs. Confirm sensors, harnesses and other installation pieces against the exact package contents...

Find Chevrolet Malibu parts by generation, body and Limited status. Different hood or fascia attachments and interior contours require exact application before comparing protection accessories. Front-End Protection by Generation Listings distinguish hood-mounted and fascia-mounted protectors across Malibu production. Match the actual hood, front-end shape and mounting rather than using finish or model name alone. Check Limited exclusions and exact body coverage in the manufacturer’s application. A shared production year does not establish identical front-end components. Floor Coverage and Chassis Details Map liner pieces to front, rear-row and cargo positions. Compare actual floor contours, console and retention with the supplied set. For brake or suspension work, use installed assembly details and engine or chassis application. Keep records of lowering components or conversions instead of transferring stock dimensions automatically. Choose Your Part Identify generation and Limited...

Choose Chevrolet Monte Carlo parts with generation and installed chassis identified. Classic brake kits, digital instruments and later electronic accessories have distinct application requirements. Classic Brake and Instrument Applications Baer listings identify specific later GM chassis kits; earlier platform titles still require exact Monte Carlo cross-coverage. Match spindles, rear axle and hydraulic requirements before choosing a conversion. Use wheel-clearance templates with the actual wheel profile and offset. A digital instrument display separately requires the correct dashboard mounting, signal inputs, sensors and wiring. Interior and Electronic Interfaces Universal mats need measured floor contours, retention and pedal clearance. Different Monte Carlo bodies do not establish interchangeable molded floor coverage. Pedal-response devices need an appropriate electronic accelerator system, connector and exact application. A broad model name spanning several generations does not...

Choose GMC Caballero brake-friction and shock components using the installed wheel ends and suspension. Compare operating requirements and mounting details before selecting a replacement. Front Friction and Rear Drum Service Identify front caliper and pad dimensions, then compare friction compounds for actual road or motorsport conditions. A compound name does not establish correct pad geometry. For rear shoes, compare the fitted drum and shoe dimensions. Check springs, adjusters and other service pieces against the package contents. Shock Position and Engine Accessories Match shocks by front/rear position, mounts and exact chassis application. Record ride-height or suspension changes with the service request. For a crankshaft damper, identify the actual engine, balance arrangement, pulley interface and manufacturer application. Keep any engine conversion explicit; a diesel-specific damper requires that exact installed-engine compatibility. Choose Your Part Identify actual front an...

Shop lowering springs from Eibach, H&R, Swift Springs, RS-R, UMI Performance, MaxTrac, aFe Control, Ford Racing, Whiteline, Vogtland, ST Suspensions, Belltech, Skyjacker, and Black Ops Auto Works. Find sport lowering springs, Pro-Kit springs, Sportline springs, Spec-R springs, Super Sport springs, Race springs, Down Sus springs, adjustable lowering springs, SUV lowering springs, truck lowering springs, and EV lowering springs for street cars, muscle cars, sport compacts, European performance platforms, SUVs, trucks, and modern EV builds. Lowering springs are the simplest way to drop a vehicle’s ride height. They keep the OE shocks, upper mounts, and suspension geometry components in place and swap only the coil springs for shorter, progressively- or linearly-wound performance springs. Shop by vehicle year, make, model, trim, drop height, spring type (progressive vs linear), and application (street, show, mild-handling, SUV, EV, truck). Lowering springs are the correct choice...

Shop Oldsmobile Cutlass brake conversions by exact generation, spindle and rear axle. Earlier and later GM kit applications must be checked separately. Front Conversion and Wheel Template Compare 1964–1972 and 1978–1988 kit references against the actual chassis and spindle. Match full kit number, hubs, studs and brake geometry rather than rotor diameter alone. Use the exact wheel-clearance template. Review hoses, master-cylinder/proportioning requirements and existing rear brakes with the installer. Rear Brakes and Body Hardware For rear disc kits, identify axle housing ends, shafts, parking-brake arrangement and shock layout. A front application does not establish rear kit support. For door conversions or replacement calipers, match exact body/year or service side and mounting. Review required modifications and complete contents independently. Choose Your Part Identify exact generation, spindle and rear axle. Match complete front kit and wheel-clearance template. Review brake hydr...

Find Pontiac Bonneville brake, chassis and accessory parts by exact production and body configuration. Separate earlier full-size brake applications from later models and converted assemblies. Brake Kits and Service Components For a 1971–1976 full-size Classic Series kit, confirm exact supported spindle/chassis and wheel clearance with the kit template. Rotor diameter alone does not establish clearance or fit. Match replacement rotors, calipers and wheel cylinders to current brake equipment. Verify service side, hydraulic interfaces and supplied hardware rather than extending Regal or Buick references automatically. Chassis and Body-Specific Fit Dampers require exact position, mounts, travel and suspension support. Deflectors labelled LeSabre need confirmed Bonneville body/year coverage and the specified mounting method. EFI nitrous and cabin mat references need separate engine/control and physical-fit checks. Confirm package contents, secure mat retention and pedal clearance before...

Find Pontiac Grand Prix brake, body and engine-upgrade parts by exact generation and installed powertrain. Earlier chassis brake systems and later door conversions require separate selections. Chassis and Body Applications For 1978–1988 GM brake-kit references, confirm exact Grand Prix chassis/spindle support and use the wheel-clearance template. Review front/rear system and parking-brake contents independently. The displayed door-conversion reference specifies 2004–2008 Grand Prix. Confirm exact body, preparation, clearances and complete kit instructions. LS Injection Plate Requirements A 102mm LS nitrous or injection plate needs a supported installed intake/throttle-body flange and exact system compatibility. Do not assume every Grand Prix uses that arrangement. Compare a complete bottle-equipped kit with a plate or conversion component. Verify fuel/control requirements, plumbing and separately needed components before ordering. Choose Your Part Identify generation, body and inst...

Suspension parts and complete kits for cars, trucks, SUVs, Jeeps, and off-road builds are stocked at Black Ops Auto Works. Shop coilovers, lowering springs, lift kits, leveling kits, shocks and struts, sway bars, control arms, tie rods, ball joints, bushings, chassis bracing, alignment hardware, air suspension, and complete stage kits from Bilstein, KW, Ohlins, Fox, KING, ICON, BC Racing, Silvers, Eibach, H&R, Swift Springs, Whiteline, Energy Suspension, Moog, SPC Performance, Rough Country, ReadyLIFT, BDS, Skyjacker, Air Lift, Firestone, and Black Ops Auto Works. Start with a matched shock and spring package or a full coilover kit, then layer in sway bars, chassis bracing, and camber adjustment hardware. Every part is filterable by year, make, model, trim, and drivetrain to confirm fitment before ordering. What This Category Covers Suspension is the highest-leverage handling upgrade on any vehicle. A properly matched shock, spring, and sway bar package produces measurable i...

Shop UMI Performance suspension, chassis, steering, and handling components by exact manufacturer part number and verified vehicle application.UMI Performance Product Families Control arms, panhard bars, trailing arms, and suspension links Sway bars, end-link hardware, chassis braces, and subframes Coilovers, lowering springs, shocks, and suspension packages Crossmembers, engine mounts, driveshaft loops, and installation hardware Choose Your PartConfirm the exact manufacturer part number, year, make, model, factory equipment, mounting position, adjustment range, material, finish, bushing configuration, and every current manufacturer note. Confirm every engine, drivetrain, chassis and factory-equipment requirement in the product application notes.About UMI PerformanceUMI Performance designs and manufactures suspension and chassis components for American performance vehicles in Philipsburg, Pennsylvania.Related Collections UMI Performance products Control arms Sway bars Lowering sprin...