-9%
Click to zoom in
SKU: XKNI18521-2E | UPC: 9337467255409
XClutch 91-98 Nissan 180SX S13 2.0L 7.25in Twin Solid Ceramic Clutch Kit
The XClutch 7.25 inch twin solid ceramic clutch kit upgrades 1991-1998 Nissan 180SX S13 2.0L SR20DET drivetrains for racing demands. This lightweight twin disc setup handles 825 ft/lbs (1120 Nm) torque with sharp throttle response and consistent grip under extreme loads. Engineered with advanced pressure plate and diaphragm for firm pedal feel and reliable power transfer in street or track use.
Key Features
- Twin Solid Disc Design: Reduces rotational mass for quicker revs and throttle response while supporting high horsepower builds
- Ceramic Friction Material: Delivers heat resistance and fade-free performance during prolonged high-RPM racing sessions
- 7.25 Inch Diameter: Matches S13 flywheel specs for direct bolt-on fit with increased clamping pressure over stock
- 23-Spline Hub: Precisely matches Nissan SR20DET input shaft (23T x 1.25in) for seamless installation and zero slippage
- Race-Ready Construction: Built in advanced R&.D facility with 30+ years of clutch expertise for track-proven durability
Product Notes
- Inspect flywheel condition prior to install. resurfacing or new lightweight flywheel recommended for peak performance
- Use high-quality clutch fluid and break-in per instructions for longest service life
- Secure packaging protects components during transit. handle with care to avoid disc damage
Installation Notes
- Professional installation recommended.
- Requires Nissan S13 compatible flywheel. align tool essential for proper disc centering
- Includes complete kit with pressure plate, discs, throwout bearing, and pilot bearing. no additional hardware needed
This Part Fits
| Year | Make | Model | Submodel |
|---|---|---|---|
| 1991-1998 | Nissan | 180SX | S13 2.0L SR20DET |
| 1989-1994 | Nissan | Silvia | S13 CA18DET/SR20DET |
| 1991-1994 | Nissan | 240SX | S13 SE SR20DET |
Why Choose XClutch?
- Backed by in-house testing facility and 30+ years of clutch development experience
- Focuses on balance of driveability and race-level torque handling
- Analyzes pivot and diaphragm for precise pedal feedback in every kit
Frequently Asked Questions
-
Q: Will this fit my 1992 Nissan 180SX S13 SR20DET?
A: Yes, direct fit for 1991-1998 180SX S13 2.0L models with stock or upgraded flywheel. confirms to RPS13 chassis specs -
Q: What material are the discs made from?
A: Solid hub ceramic paddles for maximum heat dissipation and grip in drag or circuit racing without flex -
Q: What is the warranty and break-in process?
A: 12-month warranty against defects. follow 500-mile break-in with progressive load increases for optimal bedding
Shipping & Handling
- Method: UPS Ground or FedEx
- Availability: In stock - ships same or next business day
- Packaging: Protective cardboard box 13 x 13 x 4 inches
- Weight: 17 lbs shipping weight
Clutch Components
Clutch components for manual transmission builds are stocked at Black Ops Auto Works, spanning single and multi disc clutch kits, master cylinders, clutch lines, clutch forks, and rebuild kits. Shop applications for Subaru WRX and STI, Honda and Acura D-Series, Nissan Skyline GT-R and 350Z, BMW E46 M3, Ford Mustang GT and GT500, GM LS platforms, and Dodge Challenger HEMI. Kits range from street-friendly organic disc setups to twin and triple plate racing clutches for high horsepower and forced induction builds. Black Ops Auto Works carries 1,537 clutch component SKUs. What This Category Covers This collection includes clutch covers, clutch discs, clutch forks, clutch lines, clutch master cylinders, clutch rebuild kits, and both single and multi disc clutch kits for manual transmission vehicles across import and domestic platforms. Choosing a Clutch Stage for Your Build Stage 1 clutches suit lightly modified street engines up to about 350 horsepower, Stage 2 kits cover 350 to 500...
View Clutch Components Products
Clutch Kits - Multi
Multi disc clutch kits for high torque manual transmission builds are stocked at Black Ops Auto Works. Shop twin disc and triple disc clutch systems, matched pressure plates, friction discs, release bearings, flywheel packages, alignment tools, and hardware for domestic, import, muscle car, and track applications. Every product is filterable by year, make, model, trim, engine, and drivetrain. The collection includes high-capacity systems for LS, LT, Coyote, HEMI, VQ, RB, K-series, Subaru, BMW, Honda, Mazda, Nissan, and Ford platforms. What This Multi Disc Clutch Collection Covers Twin and triple disc systems Multi disc clutch kits use two or three smaller friction discs to increase torque capacity without requiring an extremely heavy pedal or oversized single disc. They are common in supercharged, turbocharged, drag, road race, and high horsepower street builds. Twin Disc vs Triple Disc Clutches Torque capacity and drivability Twin disc kits balance strong holding power with man...
View Clutch Kits - Multi Products
Drivetrain
Drivetrain parts for high-horsepower Mopar, truck, Jeep, and import platforms are stocked at Black Ops Auto Works. Shop differentials, axles, driveshafts, clutch kits, flywheels, flexplates, shifters, transmission components, ring and pinion gears, differential braces, and driveline hardware for Hellcat, Trackhawk, TRX, HEMI, LS, LT, Coyote, and turbocharged import platforms. Every drivetrain part is filterable by vehicle platform, drivetrain layout, transmission type, and power level so the correct part ships the first time. Black Ops Auto Works carries 4,765 drivetrain SKUs across differentials, axles, clutches, and transmission hardware. What This Category Covers The drivetrain transfers power from the engine to the wheels and includes the transmission, clutch, driveshafts, axles, differentials, ring and pinion gears, wheel hubs, wheel bearings, U-joints, shifters, mounts, and bushings. Upgrading these components improves power delivery, durability, and reliability under incr...
View Drivetrain Products