Click to zoom in
Yukon Gear Hardcore Drive Flange Kit for Dana Spicer 60 (YHC50005)
The YHC50005 Yukon Hardcore Drive Flange Kit is a premium upgrade for the Dana Spicer 60. Designed to replace factory flimsy drive flanges with heavy-duty billet steel units, the YHC50005 eliminates axle walk-out under extreme off-road conditions. Each kit includes Yukon's signature engraved caps for a clean, professional appearance that matches the quality of the flanges themselves.
Features and Benefits
- Heavy-duty billet steel construction for superior strength over factory flanges
- Eliminates axle walk-out common with factory flanges under hard off-road use
- Yukon-engraved caps provide a clean professional finish and confirm kit authenticity
- Machined to precise tolerances for a correct fit on 35 spline outer axle stubs
- Designed specifically for the Dana Spicer 60 axle for straightforward installation
- One-year warranty against manufacturer defects; Yukon Y.E.S. lifetime plan available
- Increases reliability for rock crawling, mud, and other high-stress off-road disciplines
- Sold as a complete kit with all required hardware
Specifications
| Specification | Detail |
|---|---|
| Part Number | YHC50005 |
| UPC | 883584290698 |
| Differential / Axle | Dana Spicer 60 |
| Outer Spline Count | 35 spline outer axle stubs |
| Type | Hardcore Drive Flange Kit |
| Cap Style | Yukon Engraved |
| Warranty | 1 Year Against Manufacturer Defects |
What Is Included
- Two (2) billet steel drive flanges
- Two (2) Yukon engraved caps
- All required hardware
- Installation instructions
Frequently Asked Questions
Q: What axle does part number YHC50005 fit?
A: The YHC50005 is designed for the Dana Spicer 60 with 35 spline outer axle stubs. Verify your axle spline count before ordering.
Q: Why upgrade to the YHC50005 Hardcore Drive Flange?
A: Factory drive flanges can loosen under extreme off-road stress, causing axle walk-out and potential axle disengagement. The YHC50005 billet steel flanges lock the axle in place for reliable performance in rock crawling and high-torque situations.
Q: Do the YHC50005 flanges work with lockers?
A: Yes. The YHC50005 is fully compatible with factory and aftermarket locking differentials installed in the Dana Spicer 60. The heavy-duty flanges are specifically designed for the higher-torque conditions that lockers create.
Q: What is the warranty on YHC50005?
A: Yukon Gear covers the YHC50005 with a one-year warranty against manufacturer defects. Under the Magnuson-Moss Warranty Act, using aftermarket parts such as the YHC50005 does not void your vehicle's factory warranty unless the manufacturer can prove the part caused a specific failure.
Q: What tools are required to install YHC50005?
A: Basic hand tools, a torque wrench, and axle seal tools are typically required. Refer to the Yukon installation guide included with YHC50005 for specific requirements and torque specifications.
Q: Are the Yukon engraved caps included with YHC50005 functional?
A: Yes. The engraved caps provide the proper retention and protection for the drive flange hubs while also serving as a distinctive identifier of the Yukon Hardcore kit.
Q: Can I reuse my factory hardware with YHC50005?
A: We recommend using the hardware included with the YHC50005 kit. Reusing stretched or fatigued factory hardware may compromise the flange's retention under load.
Q: Is professional installation required for YHC50005?
A: The YHC50005 can be installed by experienced DIY mechanics. Proper torque on all fasteners is essential. If you are not confident in your axle work, professional installation is recommended.
Installation Instructions
- Raise the vehicle safely and support it on jack stands. Remove the wheel and hub assembly.
- Remove the factory drive flanges from the axle outer stubs. Clean all mating surfaces.
- Inspect the outer axle stub splines for wear or damage before installing YHC50005.
- Slide the new billet drive flanges from the YHC50005 kit onto the outer axle stubs.
- Install the Yukon engraved caps, ensuring they seat fully against the flange body.
- Thread in all provided hardware by hand first, then torque to specification per the Yukon installation guide.
- Reinstall the hub assembly and wheel. Torque lug nuts to factory specification.
- Lower the vehicle and road-test. Inspect for any unusual vibration or noise after the first 50 miles.
WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.p65warnings.ca.gov.
Differential Install Kits
Differential Install Kits are stocked at Black Ops Auto Works for performance projects and dependable replacement work. Differential Install Kits provide the bearings, races, seals, shims, crush sleeves and setup hardware needed when rebuilding or re-gearing an axle. Shop master install kits, mini install kits, pinion install kits, carrier bearings, solid spacers and axle-specific hardware for Dana, GM, Ford, Chrysler, Jeep and Toyota applications. Every product is filterable by year, make, model, trim, engine and drivetrain so the correct part ships the first time. Black Ops Auto Works carries 114 differential install kits products across street, truck, track, restoration and custom-build applications. What This Differential Install Kits Collection Covers This collection supports axle work on Dana 30, Dana 44, Dana 60, Ford 8.8, Ford 9-inch, GM 10-bolt, GM 8.6, GM 11.5 and Chrysler rear ends. Product pages should be matched to the exact differential model, spline count, axle ge...
View Differential Install Kits Products
Differentials & Components
Differentials and components at Black Ops Auto Works include diff braces, diff covers, rebuild and overhaul kits, differential bushings and mounts, limited-slip differentials, yokes, and final drive gears built for street, towing, off-road, and racing applications. Black Ops Auto Works carries 1,332 drivetrain SKUs from Yukon Gear and Axle, ARB, OS Giken, SuperPro, and Per4mance Development, spanning Hellcat and Trackhawk platforms, trucks, Jeep Wrangler, and sport compacts. What This Collection Covers This collection combines fifteen related differential and drivetrain categories, including diff braces, diff covers and gaskets, rebuild and overhaul kits, install kits, seal kits, bushings, mounts, housings, dropouts, spider gears, yokes, complete differentials, and final drive gears. Product Types in This Collection Shoppers will find billet differential braces for high-horsepower RWD platforms, nodular iron and aluminum diff covers, master overhaul kits, differential-to-cradle ...
View Differentials & Components Products
Drivetrain
Drivetrain parts for high-horsepower Mopar, truck, Jeep, and import platforms are stocked at Black Ops Auto Works. Shop differentials, axles, driveshafts, clutch kits, flywheels, flexplates, shifters, transmission components, ring and pinion gears, differential braces, and driveline hardware for Hellcat, Trackhawk, TRX, HEMI, LS, LT, Coyote, and turbocharged import platforms. Every drivetrain part is filterable by vehicle platform, drivetrain layout, transmission type, and power level so the correct part ships the first time. Black Ops Auto Works carries 4,765 drivetrain SKUs across differentials, axles, clutches, and transmission hardware. What This Category Covers The drivetrain transfers power from the engine to the wheels and includes the transmission, clutch, driveshafts, axles, differentials, ring and pinion gears, wheel hubs, wheel bearings, U-joints, shifters, mounts, and bushings. Upgrading these components improves power delivery, durability, and reliability under incr...
View Drivetrain Products
Yukon Gear & Axle
Yukon Gear and Axle drivetrain parts are stocked at Black Ops Auto Works for GM, Ford, Chrysler, Ram, and Jeep platforms. Shop ring and pinion sets, positraction and locker units, axle overhaul kits, differential covers, driveshafts, and manual transmission rebuild components for Dana 60/61, GM 8.2/8.5/8.6/9.5, Ford 8.8/9/10.25/10.5, and Chrysler 8.25/9.25 inch axles. Yukon parts are proven in extreme-duty use, including King of the Hammers and Moab rock crawling events, and every part here is filterable by axle size, gear ratio, and spline count. Black Ops Auto Works carries 1122 Yukon Gear and Axle SKUs across ring and pinion, differential, and axle rebuild categories. What This Brand Covers Yukon Gear and Axle builds ring and pinion sets, differential carriers, positraction and locking differentials, axle shafts, bearing and seal kits, driveshafts, and manual transmission rebuild components for domestic trucks, SUVs, and Jeeps. The brand is best known for supporting extreme-d...
View Yukon Gear & Axle Products