ACT 2010 Chevrolet Corvette XACT Flywheel Prolite

ACT Clutch Kits, Mod-Twin Clutches & XACT Flywheels Build a matched manual-transmission drivetrain with ACT performance clutch kits, replacement clutch discs, pressure plates, XACT flywheels and installation components. Black Ops Auto Works carries Advanced Clutch Technology parts for street cars, track builds and competition applications, including vehicle-specific single-disc kits and Mod-Twin multi-disc systems. Shop by exact ACT part number and your complete engine and transmission combination to find the right configuration for your build. Choose Your Part Start with the engine’s expected torque output and how the car will be driven. A daily driver needs predictable engagement, while a dedicated race car may prioritize fast shifts and repeated high-load operation. Compare the exact kit’s published torque capacity, pressure plate, friction material and hub design. ACT engine-torque ratings are measured at the engine; they should not be treated as interchangeable with wheel-t...

Find Cadillac CTS-V parts by generation, body and installed performance equipment. Exhaust, brake and chassis purchases should match the exact CTS-V application and current setup. Generation and Body Application Record engine, gearbox and sedan, coupe or wagon body where applicable. Different CTS-V generations require distinct induction, exhaust and service references. For an exhaust, compare body routing, mounting, valve requirements and outlets. Distinguish a complete system from an axle-back, mid-pipe or conversion component. Brake and Chassis Selection Choose friction parts by actual caliper, axle, pad shape and rotor material. A shared GM performance application needs exact manufacturer coverage. Suspension systems must account for the installed electronic equipment, axle loads and intended ride height. Review travel, wheel clearance and components retained by the kit. Choose Your Part Identify CTS-V generation, engine and body. Compare exhaust routing and installation scope. ...

Find Cadillac CTS parts by generation, engine and sedan, coupe or wagon body. Exterior protection and control accessories need exact production and interface coverage. Hood and Window Accessories Match hood protectors to actual front-end production and mounting. Window deflectors need exact body, door coverage and installation method. Compare the pieces supplied and follow the manufacturer’s instructions for the original window arrangement. A related CTS-V body or another generation should not be assumed compatible. Pedal Controls and Interior Fit Match pedal-response accessories to the actual accelerator connector and phone or display equipment. Response adjustment does not establish a verified engine-output gain. Floor mats need measured contours, retention and pedal clearance. For engine, brake and suspension parts, record the installed assemblies and distinguish standard CTS from CTS-V applications. Choose Your Part Identify generation, engine and body. Match hood and deflector...

Choose Cadillac CTS-V parts by generation, engine and the current powertrain build. Dampers, supercharger pulleys and injectors need a coordinated specification rather than independent size choices. Damper and Supercharger Drive For LSA or later engine applications, confirm exact damper, hub and pulley compatibility. Compare mounting, diameter, groove count, drive arrangement and kit contents. An overdrive percentage describes a drive configuration, not a guaranteed power result. Review belt, clearance, cooling, fueling and calibration requirements with the engine builder before combining components. Injector and Driveline Interfaces Injectors need exact fuel-system, connector, physical-length and flow-characterization coverage. Review the compatible engine management and calibration information for the intended fuel and setup. Clutch, gearbox and chassis parts also need actual generation and installed equipment. Keep component references for engine, supercharger and fuel-system cha...

Find Chevrolet Camaro parts by generation, engine, body and installed equipment. Compare exhaust sound and system scope first, then plan brake, chassis or drivetrain service around the actual assemblies on the car. Choose the Exhaust Scope and Sound AWE Camaro SS listings distinguish axle-back, cat-back and conversion components, with Touring or Track editions, resonated or non-resonated choices and different outlet or tip configurations. Match the exact generation, engine, body and rear valance before comparing sound. An axle-back and a cat-back replace different sections. A conversion kit requires a compatible starting exhaust; review the part number, supplied sections, valve requirements and installation instructions rather than treating it as a complete system. Match Brakes, Body and Drivetrain Equipment Brake pads and rotors must suit the installed caliper, axle and rotor dimensions. Factory performance packages or later conversions can change the service application. Compare c...

Find Chevrolet Corvette parts by generation, engine and installed equipment. C7 and C8 exhaust systems, brake options and electronic suspension need their own application checks before choosing an upgrade or service part. Exhaust Generation, Valves and Sound AWE listings distinguish C7 applications with AFM-related restrictions from separate C8 Stingray and Z06 systems. Match exact engine, generation and valve equipment, then compare Touring, Track or SwitchPath configuration using the specific system’s guidance. A conversion kit changes specified sections of a compatible existing exhaust. Review supplied valve hardware, retained factory components, outlet arrangement and installation instructions. A valve simulator is not itself a selectable exhaust valve. Brake, Suspension and Body Equipment Choose pads and rotors by installed caliper, axle, dimensions and rotor material. Record factory brake options and conversions, then compare compound guidance for the intended road or competit...

Find Chevrolet SSR parts with engine, transmission and installed exhaust equipment identified. Headers, crankshaft dampers and control accessories need exact SSR application and clearance. Headers and Exhaust Installation Match headers to actual engine and body coverage. Compare steering, chassis and accessory clearance, connection points and the manufacturer’s required companion components. A shorty header is a component within the exhaust system. Review gaskets, hardware, sensor provisions and the retained or replaced pipe sections in the exact installation instructions. Damper and Electronic Interfaces A crankshaft damper must match engine version, crankshaft fit, balance and accessory-drive alignment. A stock-pulley condition requires the corresponding installed setup. Pedal-response devices need exact vehicle and accelerator-connector support. Compare interface equipment separately; the product’s response function does not establish extra engine horsepower. Choose Your Part Id...

Clutch components for manual transmission builds are stocked at Black Ops Auto Works, spanning single and multi disc clutch kits, master cylinders, clutch lines, clutch forks, and rebuild kits. Shop applications for Subaru WRX and STI, Honda and Acura D-Series, Nissan Skyline GT-R and 350Z, BMW E46 M3, Ford Mustang GT and GT500, GM LS platforms, and Dodge Challenger HEMI. Kits range from street-friendly organic disc setups to twin and triple plate racing clutches for high horsepower and forced induction builds. Black Ops Auto Works carries 1,537 clutch component SKUs. What This Category Covers This collection includes clutch covers, clutch discs, clutch forks, clutch lines, clutch master cylinders, clutch rebuild kits, and both single and multi disc clutch kits for manual transmission vehicles across import and domestic platforms. Choosing a Clutch Stage for Your Build Stage 1 clutches suit lightly modified street engines up to about 350 horsepower, Stage 2 kits cover 350 to 500...

Drivetrain parts for high-horsepower Mopar, truck, Jeep, and import platforms are stocked at Black Ops Auto Works. Shop differentials, axles, driveshafts, clutch kits, flywheels, flexplates, shifters, transmission components, ring and pinion gears, differential braces, and driveline hardware for Hellcat, Trackhawk, TRX, HEMI, LS, LT, Coyote, and turbocharged import platforms. Every drivetrain part is filterable by vehicle platform, drivetrain layout, transmission type, and power level so the correct part ships the first time. Black Ops Auto Works carries 4,765 drivetrain SKUs across differentials, axles, clutches, and transmission hardware. What This Category Covers The drivetrain transfers power from the engine to the wheels and includes the transmission, clutch, driveshafts, axles, differentials, ring and pinion gears, wheel hubs, wheel bearings, U-joints, shifters, mounts, and bushings. Upgrading these components improves power delivery, durability, and reliability under incr...

Performance flywheels for manual transmission builds are stocked at Black Ops Auto Works. Shop billet steel flywheels, chromoly flywheels, dual-mass replacement flywheels, and lightweight aluminum flywheels for HEMI, Viper, LS, Coyote, K-series, EJ, 2JZ, and RB platforms. Every product is filterable by year, make, model, trim, engine, and drivetrain so the correct part ships the first time. Black Ops Auto Works carries 414 flywheel SKUs across weight, material, and tooth count categories. What This Category Covers The Flywheels collection spans lightweight aluminum flywheels for quick-revving race builds, billet steel flywheels for street and strip durability, and dual-mass replacement flywheels for daily-driven applications that need factory-level smoothness. The catalog is strongest on ACT, South Bend Clutch, and Fidanza flywheels for domestic muscle cars and import platforms, alongside OE-style dual-mass replacements for diesel trucks and European cars. Categories Included St...

Find Pontiac Firebird brake and engine-upgrade parts by generation and installed powertrain. Separate TPI, LT1 and LS applications before choosing throttle, fuel or accessory-drive components. Brake Upgrades by Chassis The Baer 4301678R Classic Series reference supports 1982–1992 Camaro/Firebird front applications. Review its spindle/system contents and use the exact clearance template with your wheels. Earlier F-Body and later 1998–2002 rear-rotor references are separate selections. Match axle, caliper and rotor geometry; an A-Body kit title does not establish every Firebird installation. Throttle and Engine Interfaces Compare TPI regulator and LT1/LS throttle-body references against exact engine, intake flange, throttle actuation and sensor connections. Twin 52/58mm and 85mm descriptions are not universal alternatives. For an LS-family engine damper, verify crank attachment, balance and accessory-drive alignment. Include engine/intake swaps and current part numbers in the applicat...

Find Pontiac GTO brake, engine-drive and gauge-mounting parts by exact generation and installed powertrain. Separate classic A-Body applications from later LS-equipped or converted cars. Classic Brake and Instrument Applications Match classic brake kits to exact chassis/spindle and use the wheel-clearance template. Review rotor size, stud/hub and hydraulic requirements as part of the complete system. AutoMeter’s 1968 GTO/LeMans panel provides two 3-3/8-inch and four 2-1/16-inch gauge openings. A panel or pod is not a complete instrument package unless gauges and supporting components are expressly included. LS Throttle and Damper Interfaces An 85mm LS1 throttle-body reference needs supported engine/intake flange, throttle actuation and sensor connections. Bore size alone does not identify suitability for every GTO. Match LS-family dampers by crank/balance and accessory-drive alignment. A drill/pin kit is supporting hardware/tooling, requiring its own exact installation application. ...

Transmission and drivetrain hardware for manual and automatic platforms are stocked at Black Ops Auto Works. Shop flywheels, flexplates, transmission crossmembers, mounts, coolers, valve bodies, shifters, shifter bushings, release bearings, slave cylinders, U-joints, and transmission rebuild kits for Subaru WRX and STI, Dodge Cummins diesel, GM G-Body and F-Body, BMW B58 and S58, Nissan 350Z, and Toyota GR Corolla platforms. Every part is filterable by year, make, model, and transmission type so builders can confirm the correct fitment before ordering. Black Ops Auto Works carries 1,322 transmission and drivetrain SKUs. What This Category Covers This collection spans the hardware that connects the engine to the drivetrain and manages gear selection, including flywheels, flexplates, transmission crossmembers, bell housings, transmission mounts, pans, coolers, filters, valve bodies, transmission internals, shifters, shifter bushings and cables, release bearings, slave cylinders, U...