DeatschWerks 06-13 Chevy Corvette Z06 LS7 1200cc Injectors (Set of 8)

Find Cadillac CTS-V parts by generation, body and installed performance equipment. Exhaust, brake and chassis purchases should match the exact CTS-V application and current setup. Generation and Body Application Record engine, gearbox and sedan, coupe or wagon body where applicable. Different CTS-V generations require distinct induction, exhaust and service references. For an exhaust, compare body routing, mounting, valve requirements and outlets. Distinguish a complete system from an axle-back, mid-pipe or conversion component. Brake and Chassis Selection Choose friction parts by actual caliper, axle, pad shape and rotor material. A shared GM performance application needs exact manufacturer coverage. Suspension systems must account for the installed electronic equipment, axle loads and intended ride height. Review travel, wheel clearance and components retained by the kit. Choose Your Part Identify CTS-V generation, engine and body. Compare exhaust routing and installation scope. ...

Find Cadillac CTS parts by generation, engine and sedan, coupe or wagon body. Exterior protection and control accessories need exact production and interface coverage. Hood and Window Accessories Match hood protectors to actual front-end production and mounting. Window deflectors need exact body, door coverage and installation method. Compare the pieces supplied and follow the manufacturer’s instructions for the original window arrangement. A related CTS-V body or another generation should not be assumed compatible. Pedal Controls and Interior Fit Match pedal-response accessories to the actual accelerator connector and phone or display equipment. Response adjustment does not establish a verified engine-output gain. Floor mats need measured contours, retention and pedal clearance. For engine, brake and suspension parts, record the installed assemblies and distinguish standard CTS from CTS-V applications. Choose Your Part Identify generation, engine and body. Match hood and deflector...

Choose Cadillac CTS-V parts by generation, engine and the current powertrain build. Dampers, supercharger pulleys and injectors need a coordinated specification rather than independent size choices. Damper and Supercharger Drive For LSA or later engine applications, confirm exact damper, hub and pulley compatibility. Compare mounting, diameter, groove count, drive arrangement and kit contents. An overdrive percentage describes a drive configuration, not a guaranteed power result. Review belt, clearance, cooling, fueling and calibration requirements with the engine builder before combining components. Injector and Driveline Interfaces Injectors need exact fuel-system, connector, physical-length and flow-characterization coverage. Review the compatible engine management and calibration information for the intended fuel and setup. Clutch, gearbox and chassis parts also need actual generation and installed equipment. Keep component references for engine, supercharger and fuel-system cha...

Find Chevrolet Camaro parts by generation, engine, body and installed equipment. Compare exhaust sound and system scope first, then plan brake, chassis or drivetrain service around the actual assemblies on the car. Choose the Exhaust Scope and Sound AWE Camaro SS listings distinguish axle-back, cat-back and conversion components, with Touring or Track editions, resonated or non-resonated choices and different outlet or tip configurations. Match the exact generation, engine, body and rear valance before comparing sound. An axle-back and a cat-back replace different sections. A conversion kit requires a compatible starting exhaust; review the part number, supplied sections, valve requirements and installation instructions rather than treating it as a complete system. Match Brakes, Body and Drivetrain Equipment Brake pads and rotors must suit the installed caliper, axle and rotor dimensions. Factory performance packages or later conversions can change the service application. Compare c...

Find Chevrolet Corvette parts by generation, engine and installed equipment. C7 and C8 exhaust systems, brake options and electronic suspension need their own application checks before choosing an upgrade or service part. Exhaust Generation, Valves and Sound AWE listings distinguish C7 applications with AFM-related restrictions from separate C8 Stingray and Z06 systems. Match exact engine, generation and valve equipment, then compare Touring, Track or SwitchPath configuration using the specific system’s guidance. A conversion kit changes specified sections of a compatible existing exhaust. Review supplied valve hardware, retained factory components, outlet arrangement and installation instructions. A valve simulator is not itself a selectable exhaust valve. Brake, Suspension and Body Equipment Choose pads and rotors by installed caliper, axle, dimensions and rotor material. Record factory brake options and conversions, then compare compound guidance for the intended road or competit...

Shop DeatschWerks fuel injectors, fuel pumps, pump modules, regulators, and fuel-system hardware at Black Ops Auto Works. Explore application-specific and universal components for selected domestic and import vehicles. Plan the complete system around your fuel type, operating pressure, engine configuration, and calibration requirements. DeatschWerks Fuel Injectors and Matched Sets The collection includes vehicle-specific injector sets and separately listed universal injectors. Selected applications cover Honda and Acura engines, Nissan and Infiniti platforms, Chevrolet trucks, and other listed vehicles. Match the injector body, installed height, upper and lower seals, connector, and electrical specifications. Compare flow ratings at their stated test pressure rather than treating every advertised cc/min or lb/hr figure as directly equivalent. A complete set and a single replacement injector are different packages. Confirm the cylinder count, quantity, fuel compatibility, and supplie...

Shop automotive engine parts, cooling-system components, oil-system upgrades, ignition parts, pulleys, sensors, gaskets, fuel components, and engine-bay accessories at Black Ops Auto Works. This collection covers vehicle-specific replacement parts, performance upgrades, supporting hardware, and universal components for street cars, trucks, SUVs, Jeeps, diesel vehicles, off-road builds, and motorsport applications. Engine Parts and Performance Components The Engine collection brings together components used throughout the engine, lubrication system, cooling system, ignition system, fuel system, crankcase ventilation, accessory drive, and engine compartment. Available products range from replacement sensors and gaskets to rotating-assembly parts, performance cooling systems, supercharger pulleys, catch cans, cylinder heads, camshafts, intake manifolds, and engine-bay dress-up components. Engine compatibility cannot be determined from vehicle model alone. Confirm the exact year, make, ...

Fuel injector connectors and pigtail harnesses for gasoline and diesel EFI systems are stocked at Black Ops Auto Works. Shop EV1, EV6, and EV14 connector pigtails, injector harness repair kits, Sumitomo connector housings, and diesel injector connector tubes from DeatschWerks, Bosch, and BLOX Racing for engine swaps, injector upgrades, and harness repair on Honda, GM, Ford, and Cummins and Powerstroke diesel platforms. Every product is filterable by year, make, model, trim, engine, and drivetrain so the correct part ships the first time. Black Ops Auto Works carries 397 fuel injector connector SKUs across connector style, wire length, and vehicle application categories. What This Category Covers Fuel injector connectors are the electrical interface between the engine wiring harness and each individual injector solenoid, carrying the precision pulse-width-modulated signal from the ECU that controls injection timing and duration. Connector failure, corrosion, or poor terminal cont...

Fuel Injector Sets - 6Cyl parts and accessories are stocked at Black Ops Auto Works. Six cylinder fuel injector sets are matched for balanced fueling across every cylinder in turbocharged, naturally aspirated and OE replacement builds. Shop 550, 660, 1000, 1300, 1650, 2200 cc and higher flow injector sets for 2JZ, RB26, VR6, EcoBoost, GM 4.3L, BMW N54, Nissan VQ and other six cylinder platforms. Every product is filterable by year, make, model, trim, engine and drivetrain where applicable, so the correct part ships the first time. Black Ops Auto Works carries 65 Fuel Injector Sets - 6Cyl SKUs across the performance and replacement parts needed for a focused build. What This Fuel Injector Sets - 6Cyl Collection Covers This collection includes top feed and side feed injector sets, EV14 style injectors, high impedance options and application specific kits. A matched set helps tuners deliver repeatable air fuel ratios across all cylinders and provides the headroom needed for boost, ...

Fuel injectors and fuel injector sets for street cars, turbo and supercharged builds, and diesel trucks are stocked at Black Ops Auto Works. Shop performance fuel injectors, replacement EFI injectors, diesel injectors, injector adapters, injector connectors, and injector control modules from Injector Dynamics, DeatschWerks, Bosch, and BLOX Racing for Honda, Subaru, Mazda Miata, Toyota GR Corolla, LS platforms, and Ford Powerstroke, Dodge Cummins, and Chevrolet Duramax diesel trucks. Every product is filterable by year, make, model, trim, engine, and drivetrain so the correct part ships the first time. Black Ops Auto Works carries 399 fuel injector SKUs across flow rate, cylinder count, and connector style categories. What This Category Covers Fuel injectors control the precise amount of fuel delivered to each cylinder, and are one of the most fitment-sensitive parts in any EFI fuel system. This category spans direct replacement injectors for daily drivers through high-flow perfo...

Find Pontiac G8 intake, engine-drive and accessory parts using exact engine and installed equipment. Separate the 6.0L intake application from other powertrain and converted-brake references. Intake and Pedal-Response Selection Injen’s PF7040 instructions identify the 2008–2009 G8 V8 6.0L application. Review sensor/breather connections, mounting and complete kit contents for the actual car. For PedalMonster, verify the TE Connectivity MT2 six-way harness and exact phone/iDash package. It changes throttle responsiveness rather than adding horsepower or torque. Engine Dampers and Brake Interfaces Compare ATI or Fluidampr references using exact crank/balance and accessory-drive alignment. Groove count, pulley offset and any auxiliary belt/drive requirements need part-specific confirmation. A Camaro SS rotor reference requires supported installed G8 caliper/hub geometry. Match deflectors by production/body and mounting method; review drill/pin tools separately from complete dampers. Cho...