DeatschWerks 10-15 Chevy Camaro LS 3.7 V6/ SS LS3 X2 Series Fuel Pump Module w 2 DW300s

Find Cadillac CTS-V parts by generation, body and installed performance equipment. Exhaust, brake and chassis purchases should match the exact CTS-V application and current setup. Generation and Body Application Record engine, gearbox and sedan, coupe or wagon body where applicable. Different CTS-V generations require distinct induction, exhaust and service references. For an exhaust, compare body routing, mounting, valve requirements and outlets. Distinguish a complete system from an axle-back, mid-pipe or conversion component. Brake and Chassis Selection Choose friction parts by actual caliper, axle, pad shape and rotor material. A shared GM performance application needs exact manufacturer coverage. Suspension systems must account for the installed electronic equipment, axle loads and intended ride height. Review travel, wheel clearance and components retained by the kit. Choose Your Part Identify CTS-V generation, engine and body. Compare exhaust routing and installation scope. ...

Find Cadillac CTS parts by generation, engine and sedan, coupe or wagon body. Exterior protection and control accessories need exact production and interface coverage. Hood and Window Accessories Match hood protectors to actual front-end production and mounting. Window deflectors need exact body, door coverage and installation method. Compare the pieces supplied and follow the manufacturer’s instructions for the original window arrangement. A related CTS-V body or another generation should not be assumed compatible. Pedal Controls and Interior Fit Match pedal-response accessories to the actual accelerator connector and phone or display equipment. Response adjustment does not establish a verified engine-output gain. Floor mats need measured contours, retention and pedal clearance. For engine, brake and suspension parts, record the installed assemblies and distinguish standard CTS from CTS-V applications. Choose Your Part Identify generation, engine and body. Match hood and deflector...

Choose Cadillac CTS-V parts by generation, engine and the current powertrain build. Dampers, supercharger pulleys and injectors need a coordinated specification rather than independent size choices. Damper and Supercharger Drive For LSA or later engine applications, confirm exact damper, hub and pulley compatibility. Compare mounting, diameter, groove count, drive arrangement and kit contents. An overdrive percentage describes a drive configuration, not a guaranteed power result. Review belt, clearance, cooling, fueling and calibration requirements with the engine builder before combining components. Injector and Driveline Interfaces Injectors need exact fuel-system, connector, physical-length and flow-characterization coverage. Review the compatible engine management and calibration information for the intended fuel and setup. Clutch, gearbox and chassis parts also need actual generation and installed equipment. Keep component references for engine, supercharger and fuel-system cha...

Find Chevrolet Camaro parts by generation, engine, body and installed equipment. Compare exhaust sound and system scope first, then plan brake, chassis or drivetrain service around the actual assemblies on the car. Choose the Exhaust Scope and Sound AWE Camaro SS listings distinguish axle-back, cat-back and conversion components, with Touring or Track editions, resonated or non-resonated choices and different outlet or tip configurations. Match the exact generation, engine, body and rear valance before comparing sound. An axle-back and a cat-back replace different sections. A conversion kit requires a compatible starting exhaust; review the part number, supplied sections, valve requirements and installation instructions rather than treating it as a complete system. Match Brakes, Body and Drivetrain Equipment Brake pads and rotors must suit the installed caliper, axle and rotor dimensions. Factory performance packages or later conversions can change the service application. Compare c...

Find Chevrolet Caprice parts with the generation and body identified first. Window accessories for later cars, classic brake assemblies and electronic control accessories have different application requirements. Body and Brake Generations Match window deflectors to the exact doors, glass and installation method. A four-piece set should be checked for the windows covered rather than selected from the Caprice name alone. For brake service, identify the installed axle, rotor or drum dimensions and caliper. Keep conversion references where hubs, brakes or suspension have changed. Cab and Accelerator Interfaces Floor mats need measured contours, retention and clearance around the pedals and seats. Universal coverage does not establish a molded sedan or wagon floor fit. Pedal-response accessories need the actual accelerator connector and explicit vehicle coverage. Compare phone or display requirements separately; a response change does not establish additional engine horsepower. Choose Yo...

Choose Chevrolet SS parts for the SS sedan with its engine, transmission and installed equipment recorded. This application should be identified separately from SS trims on other Chevrolet models. Sedan Brakes and Crankshaft Damper Match rotors by dimensions, hub attachment, axle and caliper. A Camaro SS reference requires exact sedan cross-coverage rather than a shared SS name. A crankshaft damper needs the installed engine, balance, crankshaft interface and accessory-drive arrangement. Compare pulley grooves, alignment and required installation hardware. Accelerator and Transmission Details Pedal-response accessories need the actual connector and manufacturer vehicle application. Compare phone or display equipment and supplied contents independently. Retain automatic or manual transmission identification for driveline purchases. Response adjustment does not establish extra horsepower or resolve other engine-build compatibility requirements. Choose Your Part Identify SS sedan prod...

Shop DeatschWerks fuel injectors, fuel pumps, pump modules, regulators, and fuel-system hardware at Black Ops Auto Works. Explore application-specific and universal components for selected domestic and import vehicles. Plan the complete system around your fuel type, operating pressure, engine configuration, and calibration requirements. DeatschWerks Fuel Injectors and Matched Sets The collection includes vehicle-specific injector sets and separately listed universal injectors. Selected applications cover Honda and Acura engines, Nissan and Infiniti platforms, Chevrolet trucks, and other listed vehicles. Match the injector body, installed height, upper and lower seals, connector, and electrical specifications. Compare flow ratings at their stated test pressure rather than treating every advertised cc/min or lb/hr figure as directly equivalent. A complete set and a single replacement injector are different packages. Confirm the cylinder count, quantity, fuel compatibility, and supplie...

Shop automotive engine parts, cooling-system components, oil-system upgrades, ignition parts, pulleys, sensors, gaskets, fuel components, and engine-bay accessories at Black Ops Auto Works. This collection covers vehicle-specific replacement parts, performance upgrades, supporting hardware, and universal components for street cars, trucks, SUVs, Jeeps, diesel vehicles, off-road builds, and motorsport applications. Engine Parts and Performance Components The Engine collection brings together components used throughout the engine, lubrication system, cooling system, ignition system, fuel system, crankcase ventilation, accessory drive, and engine compartment. Available products range from replacement sensors and gaskets to rotating-assembly parts, performance cooling systems, supercharger pulleys, catch cans, cylinder heads, camshafts, intake manifolds, and engine-bay dress-up components. Engine compatibility cannot be determined from vehicle model alone. Confirm the exact year, make, ...

Shop performance fuel delivery parts for gasoline, diesel, EFI, carbureted, boosted, and flex-fuel builds at Black Ops Auto Works. This collection brings together fuel pumps, pump modules, rails, pressure regulators, filters, tanks, surge tanks, carburetors, flex-fuel kits, sensors, injection-pump components, and installation hardware for street, towing, off-road, and motorsport applications. Choose vehicle-specific and universal components from trusted manufacturers including Aeromotive, DeatschWerks, Radium Engineering, Walbro, Fleece Performance, Fuelab, Injector Dynamics, COBB, Turbosmart, AEM, Titan Fuel Tanks, Edelbrock, and more. Always verify the exact year, make, model, engine, fuel type, pressure requirements, and connection sizes before ordering. Fuel Pumps and Pump Modules Replace a weak factory pump or build a higher-capacity fuel system with in-tank pumps, external pumps, brushless pumps, complete modules, hangers, controllers, and fitment kits. Pump selection should...

Fuel pumps and fuel pump modules for cars, trucks, and diesels are stocked at Black Ops Auto Works. Shop in-tank fuel pumps, external fuel pumps, drop-in pump modules, diesel lift pumps, pump controllers, PWM fuel controllers, single to dual pump upgrade kits, and complete pump and hanger assemblies for turbocharged four-cylinder platforms, HEMI Hellcat and Trackhawk builds, LS swaps, Corvette, Mustang, BMW, and Cummins and Duramax diesel trucks. Every pump is filterable by year, make, model, trim, engine, and fuel type so the correct flow rate and pressure rating ships the first time. Black Ops Auto Works carries 519 fuel pump SKUs across in-tank, external, diesel lift pump, and controller categories. What This Category Covers A fuel pump is the foundation of every fuel system, and matching pump flow capacity to actual engine demand is one of the most important decisions in any EFI or performance build. Undersized pumps cause lean conditions under hard acceleration that damage ...

Find Pontiac G8 intake, engine-drive and accessory parts using exact engine and installed equipment. Separate the 6.0L intake application from other powertrain and converted-brake references. Intake and Pedal-Response Selection Injen’s PF7040 instructions identify the 2008–2009 G8 V8 6.0L application. Review sensor/breather connections, mounting and complete kit contents for the actual car. For PedalMonster, verify the TE Connectivity MT2 six-way harness and exact phone/iDash package. It changes throttle responsiveness rather than adding horsepower or torque. Engine Dampers and Brake Interfaces Compare ATI or Fluidampr references using exact crank/balance and accessory-drive alignment. Groove count, pulley offset and any auxiliary belt/drive requirements need part-specific confirmation. A Camaro SS rotor reference requires supported installed G8 caliper/hub geometry. Match deflectors by production/body and mounting method; review drill/pin tools separately from complete dampers. Cho...