DeatschWerks Chevrolet LSA/LS9 Fuel Rails with Crossover

Find Cadillac CTS-V parts by generation, body and installed performance equipment. Exhaust, brake and chassis purchases should match the exact CTS-V application and current setup. Generation and Body Application Record engine, gearbox and sedan, coupe or wagon body where applicable. Different CTS-V generations require distinct induction, exhaust and service references. For an exhaust, compare body routing, mounting, valve requirements and outlets. Distinguish a complete system from an axle-back, mid-pipe or conversion component. Brake and Chassis Selection Choose friction parts by actual caliper, axle, pad shape and rotor material. A shared GM performance application needs exact manufacturer coverage. Suspension systems must account for the installed electronic equipment, axle loads and intended ride height. Review travel, wheel clearance and components retained by the kit. Choose Your Part Identify CTS-V generation, engine and body. Compare exhaust routing and installation scope. ...

Find Cadillac CTS parts by generation, engine and sedan, coupe or wagon body. Exterior protection and control accessories need exact production and interface coverage. Hood and Window Accessories Match hood protectors to actual front-end production and mounting. Window deflectors need exact body, door coverage and installation method. Compare the pieces supplied and follow the manufacturer’s instructions for the original window arrangement. A related CTS-V body or another generation should not be assumed compatible. Pedal Controls and Interior Fit Match pedal-response accessories to the actual accelerator connector and phone or display equipment. Response adjustment does not establish a verified engine-output gain. Floor mats need measured contours, retention and pedal clearance. For engine, brake and suspension parts, record the installed assemblies and distinguish standard CTS from CTS-V applications. Choose Your Part Identify generation, engine and body. Match hood and deflector...

Choose Cadillac CTS-V parts by generation, engine and the current powertrain build. Dampers, supercharger pulleys and injectors need a coordinated specification rather than independent size choices. Damper and Supercharger Drive For LSA or later engine applications, confirm exact damper, hub and pulley compatibility. Compare mounting, diameter, groove count, drive arrangement and kit contents. An overdrive percentage describes a drive configuration, not a guaranteed power result. Review belt, clearance, cooling, fueling and calibration requirements with the engine builder before combining components. Injector and Driveline Interfaces Injectors need exact fuel-system, connector, physical-length and flow-characterization coverage. Review the compatible engine management and calibration information for the intended fuel and setup. Clutch, gearbox and chassis parts also need actual generation and installed equipment. Keep component references for engine, supercharger and fuel-system cha...

Find Chevrolet Camaro parts by generation, engine, body and installed equipment. Compare exhaust sound and system scope first, then plan brake, chassis or drivetrain service around the actual assemblies on the car. Choose the Exhaust Scope and Sound AWE Camaro SS listings distinguish axle-back, cat-back and conversion components, with Touring or Track editions, resonated or non-resonated choices and different outlet or tip configurations. Match the exact generation, engine, body and rear valance before comparing sound. An axle-back and a cat-back replace different sections. A conversion kit requires a compatible starting exhaust; review the part number, supplied sections, valve requirements and installation instructions rather than treating it as a complete system. Match Brakes, Body and Drivetrain Equipment Brake pads and rotors must suit the installed caliper, axle and rotor dimensions. Factory performance packages or later conversions can change the service application. Compare c...

Find Chevrolet Corvette parts by generation, engine and installed equipment. C7 and C8 exhaust systems, brake options and electronic suspension need their own application checks before choosing an upgrade or service part. Exhaust Generation, Valves and Sound AWE listings distinguish C7 applications with AFM-related restrictions from separate C8 Stingray and Z06 systems. Match exact engine, generation and valve equipment, then compare Touring, Track or SwitchPath configuration using the specific system’s guidance. A conversion kit changes specified sections of a compatible existing exhaust. Review supplied valve hardware, retained factory components, outlet arrangement and installation instructions. A valve simulator is not itself a selectable exhaust valve. Brake, Suspension and Body Equipment Choose pads and rotors by installed caliper, axle, dimensions and rotor material. Record factory brake options and conversions, then compare compound guidance for the intended road or competit...

Shop DeatschWerks fuel injectors, fuel pumps, pump modules, regulators, and fuel-system hardware at Black Ops Auto Works. Explore application-specific and universal components for selected domestic and import vehicles. Plan the complete system around your fuel type, operating pressure, engine configuration, and calibration requirements. DeatschWerks Fuel Injectors and Matched Sets The collection includes vehicle-specific injector sets and separately listed universal injectors. Selected applications cover Honda and Acura engines, Nissan and Infiniti platforms, Chevrolet trucks, and other listed vehicles. Match the injector body, installed height, upper and lower seals, connector, and electrical specifications. Compare flow ratings at their stated test pressure rather than treating every advertised cc/min or lb/hr figure as directly equivalent. A complete set and a single replacement injector are different packages. Confirm the cylinder count, quantity, fuel compatibility, and supplie...

Shop automotive engine parts, cooling-system components, oil-system upgrades, ignition parts, pulleys, sensors, gaskets, fuel components, and engine-bay accessories at Black Ops Auto Works. This collection covers vehicle-specific replacement parts, performance upgrades, supporting hardware, and universal components for street cars, trucks, SUVs, Jeeps, diesel vehicles, off-road builds, and motorsport applications. Engine Parts and Performance Components The Engine collection brings together components used throughout the engine, lubrication system, cooling system, ignition system, fuel system, crankcase ventilation, accessory drive, and engine compartment. Available products range from replacement sensors and gaskets to rotating-assembly parts, performance cooling systems, supercharger pulleys, catch cans, cylinder heads, camshafts, intake manifolds, and engine-bay dress-up components. Engine compatibility cannot be determined from vehicle model alone. Confirm the exact year, make, ...

Shop performance fuel delivery parts for gasoline, diesel, EFI, carbureted, boosted, and flex-fuel builds at Black Ops Auto Works. This collection brings together fuel pumps, pump modules, rails, pressure regulators, filters, tanks, surge tanks, carburetors, flex-fuel kits, sensors, injection-pump components, and installation hardware for street, towing, off-road, and motorsport applications. Choose vehicle-specific and universal components from trusted manufacturers including Aeromotive, DeatschWerks, Radium Engineering, Walbro, Fleece Performance, Fuelab, Injector Dynamics, COBB, Turbosmart, AEM, Titan Fuel Tanks, Edelbrock, and more. Always verify the exact year, make, model, engine, fuel type, pressure requirements, and connection sizes before ordering. Fuel Pumps and Pump Modules Replace a weak factory pump or build a higher-capacity fuel system with in-tank pumps, external pumps, brushless pumps, complete modules, hangers, controllers, and fitment kits. Pump selection should...

Fuel Rails parts and accessories for LS, Hemi, Coyote, K-series, 2JZ, RB26, EJ, BMW S58, Mazda rotary, Miata, Ford modular, and other EFI engine swaps are stocked at Black Ops Auto Works. Shop billet fuel rails, dual-feed rails, return-style rail kits, top-feed conversions, crossover lines, fuel rail plumbing, injector hardware, and high-flow EFI components for street cars, track cars, trucks, and focused performance builds. Every product is filterable by year, make, model, trim, engine, and drivetrain so the correct part ships the first time. Black Ops Auto Works carries 197 Fuel Rails SKUs across fitment-specific product lines. What This Fuel Rails Collection Covers Fuel rails distribute pressurized fuel to the injectors. This collection includes billet rail assemblies, dual-feed and return-style kits, crossover parts, top-feed conversions, rail plumbing, brackets, and engine-specific EFI hardware. Fitment Comes First Confirm engine family, intake manifold, injector style and ...