Click to zoom in
Unleash the Coyote V8 Growl
The Thermal R&D B940-C920 catback exhaust transforms the naturally aspirated growl of your F-150's Coyote 5.0L V8 into a deep, aggressive tone the factory system holds back. Built for the Single Cab 6.5ft Bed configuration, this full 3 inch mandrel bent stainless system bolts directly to your factory hanger locations with a single exit polished tip design.
Key Features
- Full 3 inch T304 stainless steel mandrel bent tubing
- 3 chamber Helmholtz muffler design cancels drone at the source
- Direct bolt-on installation at OEM hanger locations, no cutting or welding
- Single Exit, polished angle cut tip finish
- OE emissions equipment stays fully intact
- Backed by a limited lifetime warranty
Fitment
| Year Range | Make | Model | Trim |
|---|---|---|---|
| 2015-2020 | Ford | F-150 | Lariat |
| 2015-2020 | Ford | F-150 | Platinum |
| 2015-2020 | Ford | F-150 | King Ranch |
Specifications
| Detail | Value |
|---|---|
| MPN | B940-C920 |
| UPC | Contact Black Ops Auto Works for UPC verification |
| Tubing Diameter | 3 inch |
| Material | T304 Stainless Steel |
| Exit Configuration | Single Exit |
| Tip Finish | Polished |
| Bed Configuration | Single Cab 6.5ft Bed |
| Engine | 5.0L Coyote V8 |
| Warranty | Limited Lifetime |
| Country of Origin | Made in USA |
What's Included
- One complete B940-C920 catback exhaust system
- Mandrel bent muffler and mid pipe sections
- Polished exit tip
- Double compression band clamps
- Installation hardware
About Thermal R&D
Thermal R&D started as a small muffler shop in Canoga Park, California in 1983 and has grown into a dedicated performance exhaust manufacturer known for drone free sound engineering. Every system is built in the USA from true 304 stainless steel and backed by a lifetime warranty.
Frequently Asked Questions
What is the B940-C920?The B940-C920 is a 3 inch T304 stainless steel catback exhaust system built by Thermal R&D for the Single Cab 6.5ft Bed 2015-2020 F-150 Coyote 5.0L V8, featuring a single exit polished tip and True Helmholtz Technology.
Will this exhaust fit my F-150 if it has a Gasoline Particulate Filter?This system is designed for non-GPF equipped trucks. Check your emissions label under the hood before ordering if you have a later production truck that may include a factory GPF.
Does this exhaust trigger a check engine light?No, the system connects behind the factory catalytic converters and leaves all emissions equipment untouched, so it should not trigger a CEL on a stock truck.
Will I need to modify my truck to install this?No, the B940-C920 bolts directly to the factory hanger locations with no cutting or welding required for a stock configuration truck.
Does this exhaust drone at highway speeds?No, Thermal R&D's True Helmholtz Technology is specifically tuned to cancel the resonant frequencies that cause cabin drone during steady cruising.
What tools do I need for installation?A socket set, penetrating fluid for the factory clamps, and a jack or lift to access the underside of the truck are all you need.
Is professional installation recommended?Most owners install this system themselves in a few hours in a home garage, though any exhaust shop can also install it quickly.
What is the warranty on this exhaust?Thermal R&D backs the B940-C920 with a limited lifetime warranty against manufacturing defects for as long as you own the truck.
Installation Instructions
- Raise the truck safely and remove the factory exhaust system from its rubber hangers.
- Disconnect the factory exhaust at the catalytic converter flange connection.
- Install the new head pipe section to the factory catalytic converter outlet using the supplied clamp.
- Lubricate the factory rubber hangers and lift the new muffler sections into position.
- Connect the mid pipe and tail sections using the indicator marks and double compression clamps provided.
- Install the polished exit tip and align it for even clearance and reveal.
- Tighten all clamps fully once alignment is confirmed.
- Start the truck and check for leaks or rattles before driving.
Thermal R&D
Thermal R&D exhaust systems are premium stainless steel performance exhaust upgrades for Ford, Honda, Acura, RAM, Jeep, Chevrolet, Subaru, Toyota, Scion, and Kia performance applications. Shop Thermal R&D cat-back exhaust systems, front-pipe-back exhausts, mid-pipe-back exhausts, downpipe-back exhausts, mufflers, exhaust tips, polished tips, coated tips, carbon fiber tips, and bolt-on exhaust upgrades at Black Ops Auto Works. Thermal R&D is a strong choice for drivers who want a deeper exhaust tone, improved exhaust flow, reduced cabin drone, quality construction, and vehicle-specific fitment. This collection includes Thermal R&D exhaust systems for Ford F-150, Ford Bronco, Ford Mustang GT, Ford Mustang EcoBoost, Ford Maverick EcoBoost, Ford Explorer ST, Ford Edge ST, RAM 1500 HEMI, Honda Civic Si, Honda Civic Type R, Honda Accord Sport, Acura Integra, Jeep Wrangler JK, Chevrolet Camaro, Kia Stinger GT, Subaru BRZ, Toyota 86, and Scion FR-S. Shop Thermal R&D Exha...
View Thermal R&D Products