Designed for the 2007-2015 Audi R8, this German Rush doors uses the carbon fiber construction and body-location configuration stated in the listing. Confirm the exact vehicle generation, body style, trim, bumper or panel design, and mounting requirements before ordering.
Key Features
- Part GR8CFDH0714, genuine carbon fiber door handle covers for the 2007-2015 Audi R8, supplied as 2, left and right.
- Carbon fiber door handle covers, quantity 2, left and right.
- Audi R8 Carbon Fiber V10 Style Skirts 2007-2015.
- German Rush GR8CFDT0714 Carbon Fiber Door Trim Kit for 2007-2014 Audi R8 Coupe Gen 1 Type 42.
- Dry fit the new part and check gaps and alignment across the full width on both sides.
- Vacuum formed rather than hand laid, which produces a consistent weave pattern and a dense, void free laminate.
Fitment
| Years | Make | Model | Application |
|---|---|---|---|
| 2007-2015 | Audi | R8 | Verify body style, trim, generation, installed bumper or panel, and mounting points |
Specifications
| Brand | German Rush |
|---|---|
| Manufacturer Part Number | GR8CFDH0714 |
| Product Type | Doors |
| Material | Carbon Fiber |
| Condition | New |
What's Included
One new German Rush exterior component or kit in the exact configuration and quantity stated. Opposite-side pieces, trim, mesh, brackets, fasteners, tape, adhesive, and installation hardware are included only when expressly listed.
About German Rush
German Rush supplies vehicle-specific carbon-fiber and fiberglass exterior components for select Audi, Lamborghini, and Jaguar applications. Material, finish, mounting, and fitment remain exact-part specific.
Related German Rush Products
- Shop all German Rush products
- German Rush Carbon Fiber Door Triangles for 2007-2015 Audi R8
- German Rush Carbon Fiber Door Trim Kit for 2007-2014 Audi R8 Coupe Gen 1 Type 42
- German Rush Carbon Fiber Door Trim for Side Blades for 2007-2013 Audi R8
Frequently Asked Questions
Will the Carbon Fiber Door Handle Covers for 2007-2015 Audi R8 fit my vehicle?
Match the year, make, and model in the Fitment table, then confirm generation, body style, trim, engine where relevant, installed bumper or panel, and every mounting point.
Should the Carbon Fiber Door Handle Covers for 2007-2015 Audi R8 be test-fitted before permanent installation?
Yes. Inspect the part and test-fit every mounting point, panel gap, adjacent component, and clearance before drilling, bonding, painting, clear coating, or other permanent work.
Is professional installation recommended for the Carbon Fiber Door Handle Covers for 2007-2015 Audi R8?
Yes. Exterior composite parts should be installed by a shop experienced with panel alignment, finish protection, fastening, adhesive preparation where specified, and final clearance checks.
Installation Instructions
Follow the current German Rush and vehicle-manufacturer procedure for the exact component. Inspect and test-fit the part before permanent work, protect painted surfaces, verify every mounting point and clearance, complete alignment and fastening with appropriate professional methods, and recheck the installation before driving.
Audi R8 Parts and Accessories
Shape your Audi R8’s next road or track project with carbon-fiber styling, brake and suspension options at Black Ops Auto Works. Compare German Rush exterior and cabin pieces, APR Performance aero and generation-specific H&R suspension choices. Choose a visual refresh or a coordinated chassis project around your R8’s body, engine and factory equipment.Carbon-Fiber Styling and APR Performance AeroGerman Rush listings include front splitters, winglets, door trim, side blades and rear-diffuser applications for different first-generation R8 configurations. Compare carbon-fiber and fiberglass pieces by the finish, body and mounting work required. APR Performance air dams, rocker extensions and GTC-500 wing packages provide separate aero choices for specified generations; plan attachment and any active-spoiler panel replacement as part of the package.Brakes for Road Service or Track PreparationCompare Brembo replacement-pad applications with Hawk and EBC friction choices for different...
View Audi R8 Parts and Accessories Products
Carbon Fiber Parts & Accessories
Shop carbon-fiber parts, composite bodywork and matching accessories at Black Ops Auto Works. Build a coordinated look with hoods, front lips, spoilers, diffusers, grilles, badges and interior details, or compare carbon-fiber intake and exhaust-tip components for a defined performance project. Choose the actual material, finish and vehicle application of each part.Black Ops Hoods and Grand Cherokee BodyworkBlack Ops WK2 hood choices include Sniper, Demon and CFR designs with different surface shapes and openings. The Sniper uses a raised center scoop and side louvers; the Demon features its own molded center vent-ring opening. Compare the look and physical configuration rather than assigning an unverified cooling gain to the name.Selected Black Ops hood references offer full fiberglass, carbon/fiberglass and full-carbon constructions. The visible carbon option and paint-ready fiberglass variant have different finishes and may have different weights. Choose the exact configuration an...
View Carbon Fiber Parts & Accessories Products
Doors
Shop vertical-door conversion kits, Jeep tube and half doors, carbon fiber doors and door-service components at Black Ops Auto Works. Compare Vertical Doors Inc. conversions with Seibon, DV8, Body Armor 4x4, Rugged Ridge, Fishbone and other listed options. Choose a project scope before comparing vehicle applications.Vertical Doors Inc. Conversion KitsA vertical-door conversion changes the hinge/opening system for its supported factory doors. VDI’s traditional design opens outward first, then lifts upward. These kits are different from replacement door shells, and front/rear conversion references have their own applications.The selection includes Charger, Challenger, Chrysler 300, Mustang, Ram, Corvette and many other vehicle-specific references. Match generation and body style, then review the exact kit’s hinge/shock arrangement, clearance and installation instructions. A shared model badge does not establish one universal hinge geometry.Jeep Tube, Trail and Half DoorsCompare Wrangl...
View Doors Products
Exterior Parts & Accessories
Shop exterior parts and accessories for cars, trucks, Jeeps, and SUVs at Black Ops Auto Works. Explore carbon-fiber hoods, front lips, splitters, spoilers, diffusers, fender flares, truck steps, bed accessories, and exterior trim. Whether you are updating a performance vehicle’s appearance or adding everyday utility to a pickup, choose components matched to your exact vehicle and existing equipment. Carbon-Fiber Hoods and Body Panels Explore Black Ops Auto Works hood designs and selected replacement panels for Jeep Grand Cherokee, Dodge Charger, Dodge Durango, Chrysler 300, and other listed applications. Featured designs include Demon, Sniper, Redeye, and CFR options for supported vehicle configurations. Compare the construction, finish, mounting requirements, and supplied components on each listing. A carbon-fiber appearance does not establish that every product uses the same material or manufacturing method. Browse our Black Ops Carbon Fiber collection for focused shopping. Front ...
View Exterior Parts & Accessories Products
Exterior Styling
Shop exterior styling parts to give your car, truck or SUV a coordinated look, from a subtle badge refresh to a complete carbon fiber exterior. Explore Black Ops Auto Works lips, spoilers and trim alongside Anderson Composites, Seibon, APR Performance, ADRO and other listed designs. Start with the part of the vehicle you want to change, then compare the shape, material and installation for your exact body and bumper.Front Lips, Side Skirts and Rear DiffusersCreate a consistent lower-body profile by choosing front, side and rear pieces for the same vehicle configuration. A standard-body Charger diffuser, a police-bumper reference and a Widebody design have different applications. Match the actual bumper and exhaust openings rather than selecting by the Charger name alone.For Grand Cherokee builds, the Black Ops TrackDemon front lip is a three-piece design for 2017–2021 SRT and 2018–2021 Trackhawk applications. Its carbon fiber variant displays the weave, while the fiberglass version ...
View Exterior Styling Products
German Rush
Shop German Rush carbon-fiber and fiberglass exterior components at Black Ops Auto Works. Compare splitters, diffusers, wings, side blades, skirts, vents, and body panels for selected Audi R8, Lamborghini Huracan and Aventador, and Jaguar F-Type applications. Match the exact body configuration, material, and mounting arrangement before ordering. German Rush Audi R8 Exterior PartsThis collection includes selected first-generation R8 rear wings, front splitters, door trim, winglets, side blades, and diffuser configurations. Coupe and Spyder applications can require different pieces. V8-style and V10-style parts identify specific designs and should not be treated as interchangeable.Confirm production year, body style, installed bumper or panel, and every application note. A part described for the R8 family may still exclude a facelift, trim, or body configuration within that generation. Lamborghini and Jaguar Body ComponentsExplore selected Huracan fenders, side skirts, rear bumpers, a...
View German Rush Products


