Click to zoom in
Carbon Door Triangles That Finish the Gen 1 R8 Door Panel
This is the German Rush door triangles for the 2007-2015 Audi R8 1st Gen Type 42, molded in genuine carbon fiber and built as a direct replacement for the factory door triangle trim on both doors. Part GR8CFDCT0714 picks up the small painted triangle panel and replaces it with matching gloss carbon, and it installs on the original mounting points on Coupe and Spyder bodies with the V8 and V10. The visible surface is a 2x2 weave under a gloss UV resistant clear coat chosen to match factory carbon trim, so it blends with carbon parts already on the car.
Key Features
- Part GR8CFDCT0714, genuine carbon fiber door triangles for the 2007-2015 Audi R8, supplied as 2, left and right
- Supplied as a left and right pair so both doors match
- Reproduced to the factory door trim shape for a direct swap
- Vacuum formed rather than hand laid, which produces a consistent weave pattern and a dense, void free laminate
- Factory correct 2x2 weave under a deep gloss UV resistant clear coat that meets or exceeds most OEM finish requirements
- Manufactured in the United States in Lake Elsinore, California
Fitment
| Vehicle Application | Generation or Trim | Body Style | Engine | Position | Notes |
|---|---|---|---|---|---|
| 2007-2015 Audi R8 | 1st Gen Type 42 | Coupe | V8 and V10 | Left and right door | Direct replacement using the original mounting points |
| 2007-2015 Audi R8 | 1st Gen Type 42 | Spyder | V8 and V10 | Left and right door | Direct replacement using the original mounting points |
| 2016 and newer Audi R8 Type 4S | 2nd Gen Type 4S | Coupe and Spyder | V10 | Left and right door | Not compatible, the Type 4S body uses different German Rush parts |
Specifications
| Detail | Value |
|---|---|
| Manufacturer | German Rush |
| Manufacturer part number | GR8CFDCT0714 |
| Product type | Door Triangles |
| Material | Genuine carbon fiber |
| Construction method | Vacuum formed, not hand laid |
| Weave | 2x2 |
| Finish | Gloss UV resistant clear coat |
| Piece count | 2, left and right |
| Mounting method | Bolt on at the factory mounting points |
| Position | Left and right door |
| Vehicle | 2007-2015 Audi R8 |
| Generation or trim | 1st Gen Type 42 |
| Body styles covered | Coupe and Spyder |
| Engines covered | V8 and V10 |
| Country of manufacture | United States, Lake Elsinore, California |
What's Included
- Carbon fiber door triangles, quantity 2, left and right
Order reference for this application is GR8CFDCT0714.
About German Rush
German Rush builds carbon fiber and fiberglass parts for exotic and European performance cars in Lake Elsinore, California. Every carbon panel is vacuum formed rather than hand laid, which is why the weave stays consistent from panel to panel and why the finish is specified as a 2x2 weave with a gloss clear coat similar to the carbon fiber the factory fitted. The range covers the Audi R8, the Lamborghini Aventador and Huracan, and the Jaguar F-Type, so a car can be built up in matching carbon over time.
Related Parts
- Audi R8 Carbon Fiber Door Handles
- German Rush GR8CFDT0714 Carbon Fiber Door Trim Kit for 2007-2014 Audi R8 Coupe Gen 1 Type 42
- Audi R8 Carbon Fiber Door Trim for Blades
FAQ
What is the GR8CFDCT0714?
It is the German Rush door triangles for the 2007-2015 Audi R8, supplied as 2, left and right and built as a direct replacement for the factory door triangle trim on both doors.
Is this sold as a pair?
Yes. The order includes the left and the right triangle.
Can this be combined with the door trim set?
Yes. The triangles are the same carbon and finish as the German Rush door trim, and the door trim kit can also be ordered with the triangles included.
Is this real carbon fiber or a carbon look finish?
It is genuine carbon fiber. The visible surface is a 2x2 weave finished in a gloss UV resistant clear coat chosen to sit alongside the carbon trim the factory fitted.
What is the advantage of vacuum forming over hand laid parts?
Vacuum forming compacts the laminate under pressure, which removes voids and keeps the weave straight across the panel. The result is a denser part with more repeatable thickness and a more consistent surface than a hand laid panel.
Does installation require cutting or drilling?
The part is built around the factory mounting locations, so the original panel comes off and this one goes on in its place. Professional installation is recommended, and minor prep or adjustment can be part of a normal fit.
Can it be painted or wrapped instead?
Yes. Pre fit the part to the car and confirm alignment before any paint, vinyl, or extra clear coat is applied, because a finished surface is much harder to correct afterwards.
Where is it made?
It is manufactured in the United States, in Lake Elsinore, California, where German Rush molds its carbon and fiberglass parts.
How should the shipment be checked on arrival?
Inspect the carton and the part before signing for the delivery. Note any crushed, torn, punctured, or broken condition on the freight bill in the driver's presence, because concealed damage found later is much harder to claim.
Installation Instructions
- Unpack the part, inspect it for transit damage, and confirm that part GR8CFDCT0714 matches the 2007-2015 Audi R8 application before any work starts.
- Park on a level surface and make the work area accessible, raising and supporting the car on stands or a lift when the part sits low on the body.
- Wash and dry the surrounding panels so grit does not scratch either part during the swap.
- Release the factory fasteners and clips that hold the factory door triangle trim on both doors and remove the original part, keeping all hardware.
- Transfer any reusable clips or fasteners and clean the mating surfaces.
- Dry fit the new part and check gaps and alignment across the full width on both sides.
- Carry out any minor prep or trimming needed for an ideal fit while the part is still off the car.
- If the part is going to be painted or wrapped, complete the dry fit first, then finish it, then return to installation.
- Refit the part and tighten the fasteners evenly from the center outward so the panel is not pulled out of shape.
- Recheck alignment and panel gaps, then lower the car.
- Retorque or reseat any fastener that shifted after the first drive.
Carbon Fiber Parts & Accessories
Carbon fiber parts and accessories for Jeep Grand Cherokee, Trackhawk, Dodge Charger, Challenger, Durango, Chrysler 300, Ford Mustang, and Chevrolet Camaro and Corvette are stocked at Black Ops Auto Works. Shop carbon fiber hoods, front splitters, rear spoilers, diffusers, side skirts, mirror covers, headlight covers, badges, and interior trim for Hellcat, Trackhawk, Demon, SRT, and HEMI 6.2L and 6.4L platforms. Every part is filterable by year, make, model, trim, and engine so the correct fitment ships the first time. Black Ops Auto Works carries 2,338 carbon fiber SKUs across hoods, aero, and trim categories. What This Category Covers Carbon fiber parts combine weight reduction with aggressive styling for builds that want a performance look without sacrificing strength. This category spans full hood replacements, splitters and diffusers for aerodynamic upgrades, and smaller trim and badge pieces that finish off an interior or exterior refresh. Why Carbon Fiber Carbon fiber pan...
View Carbon Fiber Parts & Accessories Products
Doors
Doors and door components for muscle cars, Jeeps, trucks, and exotics are stocked at Black Ops Auto Works. Shop vertical doors kits, replacement steel door shells, carbon fiber doors, Jeep Wrangler tube doors and half doors, door sills, door straps, mirror filler plates, and door trim for Dodge Charger and Challenger, Chrysler 300, Ford Mustang and Ranger, Ram 1500 TRX, Jeep Wrangler JK and JL, and exotic platforms. Every door part is filterable by year, make, model, trim, and body style so the correct fitment ships the first time. Black Ops Auto Works carries 500 door SKUs across vertical door kits, replacement panels, tube doors, and door trim categories. What This Category Covers Doors and door components are a core structural and styling upgrade for restorations, custom builds, and vehicles that have suffered door damage from accidents, rust, or hard off-road use. Buyers who shop this category include restoration builders replacing rust-compromised originals on classic Mopar...
View Doors Products
Exterior Parts & Accessories
Exterior parts and accessories for cars, trucks, SUVs, and Jeeps are stocked at Black Ops Auto Works. Shop bumpers, grilles, fender flares, running boards, nerf bars, tonneau covers, mud flaps, front lips, splitters, spoilers, diffusers, body kits, carbon fiber panels, roof racks, bed accessories, tow hooks, and car covers for daily drivers, work trucks, and performance builds. Every product is filterable by category, brand, and vehicle year, make, model, and trim so the correct fitment ships the first time. Black Ops Auto Works carries 9,697 exterior parts SKUs across style, protection, and utility categories. What This Category Covers Exterior parts change how a vehicle looks, protects itself, and hauls gear. Fitment depends on body style, cab and bed configuration, and factory sensor or camera equipment, so confirm compatibility before ordering. Appearance Upgrades Grilles, front lips, splitters, spoilers, diffusers, and body kits update the front end and aero character of a ...
View Exterior Parts & Accessories Products
Exterior Styling
Exterior styling parts and accessories for cars, trucks, and SUVs are stocked at Black Ops Auto Works. Shop spoilers, front splitters, rear diffusers, side skirts, body kits, carbon fiber hoods and trunks, fender flares, badges and emblems, mirror covers, chrome delete trim, and window vents for Jeep Grand Cherokee Trackhawk, Dodge Charger and Challenger, RAM TRX, Chevrolet Camaro and Corvette, and Hellcat and SRT platforms. Every product is filterable by year, make, model, trim, and body style so the correct part ships the first time. Black Ops Auto Works carries 2,389 exterior styling SKUs across aerodynamic, carbon fiber, and badge and trim categories. What This Collection Covers Exterior Styling groups together the parts that change the visual character and aerodynamics of a vehicle, from functional front splitters and rear diffusers to purely cosmetic badges and mirror covers. This collection combines Black Ops Auto Works in-house carbon fiber and fiberglass components with...
View Exterior Styling Products
German Rush
German Rush carbon fiber and fiberglass exterior parts give European sports car and supercar builds a focused aerodynamic finish. Shop front splitters, rear diffusers, side skirts, wings, door trim, vents, grille accents, side blades, bumper pieces and exterior carbon fiber parts for Audi R8, Jaguar F Type and Lamborghini Huracan applications. Every product is filterable by year, make, model, trim, engine and drivetrain so the correct part ships the first time. Black Ops Auto Works carries 49 German Rush SKUs across aero, carbon fiber styling, body accents, spoilers and vehicle specific exterior upgrades. What This German Rush Collection Covers German Rush parts in this collection focus on platform specific exterior styling for premium European performance vehicles. The range includes visual upgrades that follow the contours and mounting points of the intended vehicle, so application confirmation is essential before a panel or aero component is ordered. Front Aero and Splitters ...
View German Rush Products