German Rush GR8CFDT0714 Carbon Fiber Door Trim Kit for 2007-2014 Audi R8 Coupe Gen 1 Type 42

The German Rush GR8CFDT0714 is a 4-piece carbon fiber door trim kit built as a direct OEM replacement for the 2007-2014 Audi R8 Coupe (Gen 1 / Type 42). Every piece is vacuum formed in the USA from 100% carbon fiber with a 2x2 twill weave gloss finish, UV-resistant clear coat, and a hydrophobic Montan wax sealant that protects the finish for up to 10 months. GR8CFDT0714 installs on OEM mounting points using OEM hardware with no drilling, cutting, or extra hardware required. This is the same door trim profile as the factory part, rebuilt in carbon fiber to complete the interior carbon look on your R8.

Why Vacuum Formed Carbon Fiber Beats Hand Laid

Most aftermarket carbon fiber parts are hand laid, which introduces inconsistencies in fiber alignment, resin saturation, and dimensional accuracy from piece to piece. German Rush builds every GR8CFDT0714 kit using a vacuum forming process instead. The mold pressure is consistent on every pull, which means every set has the same wall thickness, the same surface finish quality, and the same dimensional accuracy as the previous one. The result is a part that fits the 2007-2014 Audi R8 door the way an OEM replacement should, not one that needs persuading into place during installation.

The vacuum forming process also produces a structurally stronger part. Consolidating the resin under pressure eliminates voids and air pockets that weaken hand-laid components. You are getting a lighter, stronger piece that holds its shape under the thermal cycling and vibration of everyday use.

2x2 Twill Weave Gloss Finish

The GR8CFDT0714 uses a 2x2 twill weave pattern, the same weave used on factory AMG and OEM Audi carbon fiber trim pieces. The diagonal basket pattern catches light from every angle and delivers a depth of finish that plain weave carbon fiber simply does not match. The weave is locked in under German Rush's UV-resistant clear coat, which is formulated to meet or exceed OEM finish durability requirements, preventing the yellowing and hazing that degrades untreated carbon fiber interior trim over time.

On top of the clear coat, each piece receives a hydrophobic sealant and hybrid fossilized Montan wax treatment providing up to 10 months of protection against UV fading, bird droppings, acid rain, and hard water deposits. This is not a bare carbon part that needs immediate detailing attention after installation.

Complete the Look with Add-On Pieces

The GR8CFDT0714 base kit covers the 4-piece door trim. German Rush also offers two bolt-on additions for a full carbon interior treatment on your R8:

• Door Triangles (GR8CFDCT0714) - Left and right carbon fiber door triangles for 2007-2014 Audi R8 Coupe. Fits the same OEM mounting points. Adds the corner trim pieces that complete the door card carbon coverage.
• Blade Trim (GR8CFDTB0714) - Carbon fiber trim for the R8 door blades, fits 2007-2015 Audi R8. Covers the distinctive side blade trim pieces in matching 2x2 twill carbon.

Both add-ons are available as a bundle with the GR8CFDT0714 at checkout, or separately if you want to build out the carbon interior over time.

Fitment - 2007-2014 Audi R8 Coupe Gen 1

GR8CFDT0714 is designed for the Audi R8 Coupe Gen 1 (Type 42) from 2007 through 2014. This covers both V8 and V10 Coupe variants. This kit is for the Coupe body style only and does not fit the R8 Spyder. The second-generation R8 (Type 4S, 2016 and newer) has a different door card design and is not compatible with this part number.

Full Specifications

Made in the USA

Every German Rush product is designed, vacuum formed, and finished in the United States. German Rush builds exclusively for European performance cars and holds every part to a standard that matches what Audi owners expect from their vehicles. The vacuum forming process and USA manufacturing location are not marketing points. They are the reason the GR8CFDT0714 fits correctly and holds up over time where offshore hand-laid alternatives fall short.

Installation Overview

The GR8CFDT0714 is an OEM-replacement-style interior trim installation. The pieces are dimensionally identical to the factory door trim panels they replace, and all attachment points match the existing clips and mounting hardware in your R8 door card.

• No drilling, cutting, or modification to the vehicle required
• Uses factory OEM mounting points and existing hardware
• All 4 pieces install as a set for a consistent finish across both doors
• Clean OEM trim surface before installation to ensure clip retention
• If adding Door Triangles (GR8CFDCT0714) or Blade Trim (GR8CFDTB0714), install those simultaneously for a single consistent installation session

Frequently Asked Questions

What years does the GR8CFDT0714 fit?
The GR8CFDT0714 fits the 2007-2014 Audi R8 Coupe Gen 1 (Type 42). This covers all V8 and V10 Coupe variants from model years 2007 through 2014. It does not fit the 2015+ R8 or the Gen 2 R8 (Type 4S).

Does the GR8CFDT0714 fit the R8 Spyder?
No. This kit is designed for the R8 Coupe body style only. The Spyder has a different door card and convertible-specific interior trim that is not covered by this part number.

How many pieces are in the GR8CFDT0714 kit?
The GR8CFDT0714 base kit includes 4 pieces of carbon fiber door trim, covering both front doors of the R8 Coupe as a complete set. No additional door trim pieces are needed beyond this kit for the primary door trim surface.

What is the difference between the GR8CFDT0714, GR8CFDCT0714, and GR8CFDTB0714?
The GR8CFDT0714 is the main 4-piece door trim kit. The GR8CFDCT0714 adds the carbon fiber door triangle pieces (the small corner trims in the door card). The GR8CFDTB0714 adds the carbon fiber blade trim pieces for the R8's distinctive exterior side blades. All three use the same 2x2 twill weave and vacuum formed construction and are available as a bundle at checkout.

Does this kit require any drilling or modification?
No. The GR8CFDT0714 attaches directly to the OEM mounting points using the existing factory hardware in your R8 door. No drilling, cutting, or additional hardware is required for installation.

What weave pattern and finish does the GR8CFDT0714 use?
The GR8CFDT0714 uses a 2x2 twill weave carbon fiber in a gloss finish, protected by a UV-resistant clear coat that meets or exceeds OEM finish durability requirements. The surface also receives a hydrophobic Montan wax sealant for added UV and environmental protection.

Why is vacuum formed carbon fiber better than hand laid?
Vacuum forming applies consistent mold pressure across the entire part, which results in uniform wall thickness, consistent resin saturation, and tighter dimensional accuracy compared to hand laying. This means the GR8CFDT0714 fits precisely on OEM mounting points every time, rather than requiring adjustment or persuasion during installation. The process also produces a structurally stronger part with fewer voids in the carbon fiber matrix.

Will the carbon fiber finish match other Audi carbon fiber interior trim?
The GR8CFDT0714 uses a 2x2 twill weave pattern and gloss clear coat that closely matches the factory carbon fiber trim option offered by Audi on the Gen 1 R8. For a cohesive interior, pair with the GR8CFDCT0714 door triangles and GR8CFDTB0714 blade trim from the same German Rush lineup, all using identical materials and construction.

Is German Rush a USA manufacturer?
Yes. All German Rush products are designed and manufactured in the United States using vacuum forming technology. German Rush specializes exclusively in European performance vehicle carbon fiber and fiberglass parts.