-10%
Click to zoom in
Turbosmart Mitsubishi Evo 10 10 PSI Internal Wastegate Kit is Turbosmart manufacturer part number TS-0601-3102, selected by the verified year, make, and model applications below. Turbosmart Upgraded Wastegate Actuators have been developed to provide the maximum possible boost response for your factory frame turbocharger. The Turbosmart IWG75 Series of upgraded Actuators benefit from an increased 'Working Ratio' over the factory equipment resulting in improved boost response throughout the RPM range. This Improved 'working ratio' is achieved through an increase to the effective surface area of the diaphragm & revisions to the actual springs fitted, resulting in greater leverage of the forces the actuator is working against (boost and backpressure) while still being super-responsive. Upgrading with the same base pressure as the factory, you can expect a broader boost & torque curve through peak boost being achieved earlier in the RPM and being held longer into higher
Key Features
- Silicone Nomex Diaphragm: High-temperature reinforced diaphragm resists heat and pressure for long-lasting operation up to 800hp.
- 347 Stainless Steel Housing: Corrosion-resistant construction withstands extreme turbo environments and daily driving.
- Plug and Play Fit: Includes mounting brackets and fittings for seamless installation on factory TD05H-16G6 turbo.
- SKU: TS-0601-3102 | UPC: 9329677012927 Turbosmart Mitsubishi Evo 10 10 PSI Internal Wastegate Kit This Turbosmart IWG75 internal wastegate actuator kit delivers 10 PSI (0.69 Bar) boost control for Mitsubishi Lancer Evolution X models from 2008 to 2015.
- Direct bolt-on design ensures reliable performance without modifications.
- Adjustable with optional springs for higher boost levels.
Fitment
| Years | Make | Model | Application Notes |
|---|---|---|---|
| 2008 | Mitsubishi | Lancer | Confirm every Turbosmart application note and factory configuration |
| 2010-2015 | Mitsubishi | Lancer | Confirm every Turbosmart application note and factory configuration |
Specifications
| Brand | Turbosmart |
|---|---|
| Manufacturer Part Number | TS-0601-3102 |
| Product Type | Wastegates |
| Application Type | Vehicle Specific |
| Condition | New |
What's Included
One new Turbosmart wastegates package identified by manufacturer part number TS-0601-3102, plus only the hardware and accessories expressly shown or stated for this exact part number
About Turbosmart
Turbosmart develops boost-control, blow-off-valve, intercooler, intake, exhaust, turbocharger, gasket, and installation components for performance applications.
Related Turbosmart Products
- Shop all Turbosmart products
- Turbosmart IWG75 Mitsubishi EVO 10 14 PSI Black Internal Wastegate Actuator
- Turbosmart IWG75 Mitsubishi EVO 10 18 PSI Black Internal Wastegate Actuator
- Turbosmart IWG75 Mitsubishi EVO 10 22 PSI Black Internal Wastegate Actuator
Frequently Asked Questions
How do I confirm Turbosmart TS-0601-3102 is correct for my application?
Match the exact manufacturer part number, year, make, model, factory configuration, dimensions, connection points, and every current Turbosmart note.
Are similar Turbosmart parts interchangeable with TS-0601-3102?
No. Flange style, pipe diameter, valve configuration, mounting points, calibration, finish, and included hardware can differ between part numbers.
What should be checked after installing Turbosmart TS-0601-3102?
Inspect fasteners, clamps, hoses, wiring, clearances, leaks, boost or exhaust behavior, and any required engine-management calibration after installation.
Installation
Follow the current Turbosmart instructions for manufacturer part number TS-0601-3102. Confirm all torque values, gaskets, clamps, hoses, wiring, heat clearances, leak checks, and any required calibration. Professional installation is recommended for turbocharger, boost-control, fuel, intake, and exhaust components.
Forced Induction
Forced induction is the fastest way to add real power to an engine without adding displacement, and this collection covers the full range of turbocharger, supercharger, intercooler, and boost control hardware needed to build a reliable boosted platform. Whether you are running a factory turbo upgrade, swapping to a bigger frame turbocharger, adding a centrifugal or roots style supercharger, or dialing in a nitrous system for a quick shot of extra power, you will find the components here to build and support the setup correctly. Every part in this collection is organized by system type so you can move from a stock turbocharger to a properly supported forced induction build in one place. Intercoolers, wastegates, blow off valves, boost controllers, and water meth injection components are all included alongside the core turbo and supercharger hardware so the entire boost system can be sourced together. What This Category Covers This collection includes turbochargers, turbo kits, s...
View Forced Induction Products
Turbosmart
Shop Turbosmart boost controllers, blow-off valves, wastegates, actuators, turbochargers, fuel-system components, gauges, hoses, flanges, and installation hardware by exact manufacturer part number and verified application.Turbosmart Product Families Blow-off valves, recirculation valves, and valve accessories External wastegates, internal wastegate actuators, springs, and accessories Boost controllers, turbochargers, turbine housings, and intercoolers Fuel pressure regulators, filters, gauges, hoses, fittings, flanges, and clamps Choosing the Correct Turbosmart PartConfirm the exact manufacturer part number, year, make, model, factory equipment, pressure range, pipe or flange dimensions, connection points, finish, and every current manufacturer note. Engine, trim, chassis, and platform references remain application notes rather than model tags.About TurbosmartTurbosmart develops precision boost-control, pressure-control, turbocharger, airflow, and fuel-system components for perform...
View Turbosmart Products
Wastegate Components
Wastegate components for Subaru WRX and STI, Nissan Skyline, Dodge Cummins diesel, BMW, VW, Mitsubishi Evo, and Honda turbocharged platforms are stocked at Black Ops Auto Works. Shop external wastegates, internal wastegate actuators, wastegate springs, solenoids, and replacement diaphragms for boost control on street and race turbo setups. Every product is filterable by year, make, model, engine, and wastegate size so the correct part ships the first time. Black Ops Auto Works carries 272 wastegate component SKUs across internal and external wastegate systems. What This Category Covers The Wastegate Components collection covers the hardware that regulates exhaust flow to a turbocharger, controlling boost pressure and protecting the engine from overboost. Coverage includes external wastegates for standalone turbo setups, internal wastegate actuators for factory and hybrid turbos, springs for adjusting spring pressure, and solenoids and control valves for electronic boost control ...
View Wastegate Components Products