Click to zoom in
UMI Performance 2461 is a four-spring lowering kit for the listed Chevrolet Camaro and Pontiac Firebird applications, with an approximately 1-inch front and 1.5-inch rear drop. Confirm the exact manufacturer part number and all current specifications before ordering.
Key Features
- Set of four lowering springs
- Approximately 1-inch front drop
- Approximately 1.5-inch rear drop
- 600 lb/in front spring rate
- 200 lb/in rear spring rate
- Chrome-silicon spring wire
Fitment
Use the verified year, make, and model table below, then confirm the engine, drivetrain, body configuration, factory equipment, and every current manufacturer application note.
| Years | Make | Model |
|---|---|---|
| 1982-1992 | Chevrolet | Camaro |
| 1982-1992 | Pontiac | Firebird |
Specifications
| Brand | UMI Performance |
|---|---|
| Manufacturer Part Number | 2461 |
| Product Type | Lowering Springs |
| Fitment Type | Vehicle Specific |
| Condition | New |
| GTIN | 2461 |
What's Included
One new UMI Performance lowering spring identified by manufacturer part number 2461 in the configuration shown. Hardware or companion parts are included only when expressly stated by the manufacturer.
About UMI Performance
UMI Performance manufactures automotive performance and replacement parts identified by exact part number, specifications, and published application data.
Related UMI Performance Products
- Shop all UMI Performance products
- UMI Performance 79-04 Ford Mustang Billet Aluminum Short Shifter Handle
- UMI Performance 93-02 GM F-Body Shock Tower Brace - Red Mild Steel
- UMI Performance 82-02 GM F-Body Lower Control Arm Relocation Brackets Bolt-In - Black
Frequently Asked Questions
How do I confirm 2461 is correct?
Use the verified year, make, and model table below, then confirm the engine, drivetrain, body configuration, factory equipment, and every current manufacturer application note.
Are similar-looking parts interchangeable?
No. Match part number 2461, dimensions, configuration, included components, and every current manufacturer note.
What is included with this listing?
One new UMI Performance lowering spring identified by manufacturer part number 2461 in the configuration shown. Hardware or companion parts are included only when expressly stated by the manufacturer.
Installation
Follow the current UMI Performance instructions for part number 2461. Verify fit, clearance, system specifications, fastener torque, and safe operation before use. Professional installation is recommended when specialized tools, alignment, calibration, or fabrication are required.
Lowering Springs
Shop lowering springs from Eibach, H&R, Swift Springs, RS-R, UMI Performance, MaxTrac, aFe Control, Ford Racing, Whiteline, Vogtland, ST Suspensions, Belltech, Skyjacker, and Black Ops Auto Works. Find sport lowering springs, Pro-Kit springs, Sportline springs, Spec-R springs, Super Sport springs, Race springs, Down Sus springs, adjustable lowering springs, SUV lowering springs, truck lowering springs, and EV lowering springs for street cars, muscle cars, sport compacts, European performance platforms, SUVs, trucks, and modern EV builds. Lowering springs are the simplest way to drop a vehicle’s ride height. They keep the OE shocks, upper mounts, and suspension geometry components in place and swap only the coil springs for shorter, progressively- or linearly-wound performance springs. Shop by vehicle year, make, model, trim, drop height, spring type (progressive vs linear), and application (street, show, mild-handling, SUV, EV, truck). Lowering springs are the correct choice...
View Lowering Springs Products
Suspension
Suspension parts and complete kits for cars, trucks, SUVs, Jeeps, and off-road builds are stocked at Black Ops Auto Works. Shop coilovers, lowering springs, lift kits, leveling kits, shocks and struts, sway bars, control arms, tie rods, ball joints, bushings, chassis bracing, alignment hardware, air suspension, and complete stage kits from Bilstein, KW, Ohlins, Fox, KING, ICON, BC Racing, Silvers, Eibach, H&R, Swift Springs, Whiteline, Energy Suspension, Moog, SPC Performance, Rough Country, ReadyLIFT, BDS, Skyjacker, Air Lift, Firestone, and Black Ops Auto Works. Start with a matched shock and spring package or a full coilover kit, then layer in sway bars, chassis bracing, and camber adjustment hardware. Every part is filterable by year, make, model, trim, and drivetrain to confirm fitment before ordering. What This Category Covers Suspension is the highest-leverage handling upgrade on any vehicle. A properly matched shock, spring, and sway bar package produces measurable i...
View Suspension Products
UMI Performance
Shop UMI Performance suspension, chassis, steering, and handling components by exact manufacturer part number and verified vehicle application.UMI Performance Product Families Control arms, panhard bars, trailing arms, and suspension links Sway bars, end-link hardware, chassis braces, and subframes Coilovers, lowering springs, shocks, and suspension packages Crossmembers, engine mounts, driveshaft loops, and installation hardware Choosing the Correct UMI Performance PartConfirm the exact manufacturer part number, year, make, model, factory equipment, mounting position, adjustment range, material, finish, bushing configuration, and every current manufacturer note. Engine, trim, chassis, and platform references remain application notes rather than model tags.About UMI PerformanceUMI Performance designs and manufactures suspension and chassis components for American performance vehicles in Philipsburg, Pennsylvania.Related Collections UMI Performance products Control arms Sway bars Low...
View UMI Performance Products