BMW 550i xDrive Parts & Accessories

Shop BMW 550i xDrive parts for brake maintenance, a lower F10 stance and V8 ignition service at Black Ops Auto Works. Compare Brembo rear-pad choices and DFC hardware with H&R AWD Sport springs, Dinan coils and NGK plug options. Plan a focused repair or a wider refresh around your exact xDrive sedan.

Brembo Rear Pads and DFC Service Hardware

The Brembo selection includes ceramic and low-metallic rear-pad references naming 2011–2016 550i applications. Compare the compound’s intended road use and the exact caliper coverage for the xDrive car. DFC hardware references provide separate service pieces for their stated axle applications.

Inspect the rotors before deciding on pad-only service. Match pad shape and disc dimensions, then compare sensors, clips and fitting hardware with the installer’s plan. A complete brake order addresses the actual assembly and its condition, rather than relying on the engine badge alone.

H&R Sport Springs for the F10 xDrive

H&R 50470-2 is the listed Sport spring reference for the supported 2011–2016 F10 550i xDrive. It gives this AWD chassis a lowering option with its own application, separate from rear-wheel-drive 50470. Set the desired stance around the supported damper arrangement and the car’s factory suspension equipment.

Review damper and mount condition, wheel clearance and alignment as part of the spring project. Lowering changes the suspension setup, so plan the complete installation with the workshop instead of choosing only from a drop figure.

Dinan Coil Finishes and NGK Plug Selection

Dinan N-Series ignition coils come in black, red and blue for supported engine applications. Choose a single diagnosed replacement or the quantity needed for a planned refresh, then select the finish. NGK Laser Iridium listings provide a separate spark-plug service option by exact engine and part reference.

Use the plug specification prescribed for the engine or approved tuning setup, and compare individual versus multi-piece package quantities. Coil color and plug branding do not replace the complete engine application or determine the quantity needed for the V8.

Spacers and Wheel Bolts for Your Setup

Dinan and aFe spacer listings offer different wheel-position choices. Start with wheel width, offset, hub dimensions and measured fender or suspension clearance. Match the selected thickness with the required bolt seat, thread and usable engagement, taking any existing spacers into account.

Choose Your Part

• Identify the F10 xDrive production and factory suspension details.
• Choose rear brake, lowering, ignition or wheel work.
• Compare pad compounds, spring references and service quantities.
• Match wheel measurements and the required fasteners as one installation.

Frequently Asked Questions

Which H&R Sport spring reference is for the 550i xDrive?

The listed F10 xDrive option is 50470-2 for its supported 2011–2016 application. Review all factory-equipment notes and the retained damper arrangement before ordering; 50470 is the separate rear-wheel-drive reference.

Should I replace rear pads without replacing the rotors?

That depends on measured disc condition and service limits. Have the rotors inspected first, then plan the pad compound, sensors and hardware for the repair identified.

Do Dinan coil colors change the required plug choice?

No. Select the correct coil application and prescribed plug specification for the engine or approved tune. Black, red and blue are finish choices within the supported coil family.

How do I choose matching bolts for wheel spacers?

Establish the wheel’s seat and thread requirements, spacer thickness and usable engagement together. Use the complete wheel-and-hub measurements and existing hardware details when reviewing the installation.

Related Collections

BMW 550i · BMW 550i GT xDrive · Ask Our Team