Dodge Charger Parts & Accessories

What This Collection Covers

The Charger LX and LD platform spans 2006 to 2023 across three body styles, sharing its rear wheel drive chassis and V8 heritage with the Challenger, 300, and Magnum. This collection focuses on the parts that matter most to Charger owners, exterior carbon fiber for the show and track crowd, exhaust and intake for the HEMI crowd, and suspension and brake upgrades for Scat Pack, SRT, and Hellcat owners pushing serious power.

Body Style Coverage

Fitment differs between the 2006-2010, 2011-2014, and 2015-2023 body styles, so carbon fiber hoods, splitters, and bumper covers are grouped by generation rather than sold as one universal part.

Engine Coverage

Parts in this collection span the 3.6L Pentastar V6, 5.7L HEMI, 6.4L 392 HEMI, and 6.2L supercharged Hellcat and Redeye engines, with intake, exhaust, and cooling parts matched to the specific engine and forced induction status.

Carbon Fiber Hoods and Exterior Styling

Anderson Composites and Seibon build Charger specific carbon fiber hoods using OEM mounting points and factory latch hardware, including Sniper style hoods and OEM Hellcat replica hoods. Front lip splitters, carbon fiber bumper covers, side canards, and ducktail spoilers round out the exterior lineup for 2015-2023 Chargers, with mirror covers shared across Charger and Chrysler 300 platforms.

Choosing a Hood Style

Sniper style hoods add aggressive vented styling for a track look, while OEM Hellcat replica hoods give R/T and Scat Pack owners the factory supercharged look without the factory price. Confirm body style year range before ordering since hood mounting points differ across generations.

Cat-Back Exhaust and Sound

Cat-back exhaust systems from Borla, Corsa, and Solo Performance are the most ordered upgrade for Charger HEMI owners, transforming the exhaust note and improving flow across the RPM range. Trim specific part numbers exist for each Charger variant since pipe diameter, routing, and tip placement differ between the 5.7L R/T, 6.4L Scat Pack, and 6.2L Hellcat and Redeye.

Matching Exhaust to Trim

A Hellcat specific system will not fit a 5.7L R/T due to differences in factory pipe diameter and mounting, so always filter exhaust systems by exact engine and trim before ordering.

Cold Air Intakes and Forced Induction Support

Cold air intakes from K&N, JLT, and Mopar Performance are direct fit for the 5.7L, 6.4L, and 6.2L supercharged Hellcat engines, and the Hellcat and Demon Wild catch can protects the supercharged engine from oil vapor contamination in the intake tract. OEM Hellcat intake air box silicone couplings keep factory induction hardware sealed for reliable boost delivery.

Suspension and Control Arms

Billet rear and front upper control arms from AAD fit the Charger, Challenger, 300, and Magnum shared LX and LD platform, improving suspension geometry and durability over factory stamped arms, especially on Hellcat and Scat Pack builds running higher power levels and stickier tires.

Braking and Stainless Steel Lines

Stainless steel rear brake lines improve pedal feel and reduce line expansion under hard braking on SRT, Hellcat, and Scat Pack Chargers from 2006 to 2023, replacing factory rubber lines that can swell under repeated high speed stops.

Body Kits and Widebody Styling

Vertical door conversion kits and wide body styling accessories are available for 2011-2023 Chargers, giving SRT and Hellcat owners a more dramatic show car presence beyond factory Widebody trim options.

Platform and Trim Coverage

This collection covers Charger SXT, GT, R/T, Scat Pack, SRT 392, Hellcat, and Hellcat Redeye Widebody trims across the 2006-2010, 2011-2014, and 2015-2023 body styles. Confirm exact model year, trim, and engine before ordering carbon fiber body panels or exhaust systems, since fitment is not interchangeable across body style generations.

Top Related Categories

• Dodge Challenger Parts. Shared LX and LD platform performance and styling parts
• Mopar Parts. Factory and Mopar Performance parts across the HEMI lineup
• Jeep Grand Cherokee Parts. Shared HEMI and SRT drivetrain components
• Coilovers. Adjustable suspension for HEMI and Hellcat Chargers
• Cat-back Exhaust. Trim specific exhaust systems for the full HEMI lineup
• Cold Air Intakes. Direct fit intakes for 5.7L, 6.4L, and 6.2L engines
• Forced Induction. Supercharger support parts for Hellcat and Redeye

How to Choose the Correct Charger Part

• Confirm the exact model year to identify the correct body style generation (2006-2010, 2011-2014, or 2015-2023)
• Identify the exact trim, SXT, R/T, Scat Pack, SRT, Hellcat, or Redeye, since many parts are trim specific
• Confirm the engine, 3.6L Pentastar, 5.7L HEMI, 6.4L 392, or 6.2L supercharged, before ordering intake or exhaust parts
• Check whether a carbon fiber panel uses factory mounting points or requires additional hardware
• Confirm exhaust pipe diameter and tip style match the factory exhaust routing for the trim
• Verify whether a part is shared across Charger, Challenger, 300, and Magnum before assuming cross platform fitment
• Review whether forced induction support parts are required for supercharged Hellcat and Redeye builds
• Confirm brake line kits match the correct axle and brake package for the trim
• Check for any body style specific mirror, bumper, or hood mounting differences
• Read the fitment notes for widebody or non widebody specific accessories

Common Questions

What exhaust fits all Dodge Charger trims?

Most manufacturers produce trim specific kits, so a Hellcat system will not fit a 5.7L R/T due to differences in exhaust pipe diameter, routing, and tip placement. Filter by the specific engine and model year when ordering. Borla, Corsa, and Solo Performance all have fitment specific part numbers for each Charger variant from SXT through Redeye Widebody.

Are carbon fiber hoods a direct bolt-on for the Charger?

Yes, for most model years. Anderson Composites and Seibon produce Charger specific carbon fiber hoods that use OEM mounting points and factory latch hardware. Fitment varies between the 2006-2010, 2011-2014, and 2015-2023 body styles, so always confirm the year range.

Can Challenger parts be used on a Charger?

Some suspension components, like AAD billet control arms, are shared across the Charger, Challenger, 300, and Magnum LX and LD platform. Body panels, exhaust, and other exterior parts are generally not interchangeable between the sedan and coupe body styles.

What cold air intake fits the Hellcat engine?

K&N, JLT, and Mopar Performance all produce direct fit cold air intakes for the 6.2L supercharged Hellcat engine, along with options for the 5.7L and 6.4L HEMI engines.

Does the Charger Hellcat need a catch can?

A catch can is a recommended addition for supercharged Hellcat and Demon engines to capture oil vapor before it reaches the intake tract, helping protect the supercharger and intake components from oil contamination over time.

What is the difference between a Sniper hood and an OEM Hellcat replica hood?

A Sniper style hood adds aggressive vented styling not found on any factory Charger, while an OEM Hellcat replica hood mimics the factory supercharged Hellcat hood look for R/T and Scat Pack owners who want that appearance.

Do stainless brake lines improve braking performance?

Stainless steel brake lines reduce line expansion under hard braking compared to factory rubber lines, which can improve pedal feel and consistency during repeated high speed stops on SRT and Hellcat Chargers.

Will a widebody kit fit a non-Widebody Hellcat?

Vertical door kits and certain wide body styling accessories are designed to work across 2011-2023 Chargers, but always confirm whether the specific kit is intended for factory Widebody cars or standard width fenders.

Can I run a Hellcat cold air intake on a naturally aspirated HEMI?

No. Cold air intakes are matched to the specific engine, since supercharged Hellcat intakes are designed around the supercharger inlet and housing, which differs significantly from naturally aspirated 5.7L and 6.4L intake tracts.

What suspension upgrade is recommended for a Scat Pack Charger?

Billet upper control arms from AAD are a popular upgrade for Scat Pack and Hellcat Chargers running higher power levels and grippier tires, improving suspension geometry durability over the factory stamped arms.

Why Buy Dodge Charger Parts from Black Ops Auto Works

Black Ops Auto Works stocks 382 Dodge Charger SKUs across exterior carbon fiber, exhaust, intake, suspension, and braking with real fitment data, competitive pricing, and support from staff who build these HEMI and Hellcat platforms themselves. Products are filterable by year, trim, and engine to confirm the correct application before ordering.

For a complete Mopar build, browse our Dodge Challenger Parts, Mopar Parts, Jeep Grand Cherokee Parts, Coilovers, Cat-back Exhaust, Cold Air Intakes, and Forced Induction.