Chevrolet 3B Parts & Accessories

Explore Chevrolet 3B parts for drum-brake service and clutch or drivetrain projects at Black Ops Auto Works. Review DFC drum and shoe references alongside McLeod flywheels and an adjustable release bearing. Build the order around the actual chassis, production year and installed engine and gearbox.

Drum-Brake Service Choices

For drum-brake service, compare DFC drums and shoes with the axle and assembly installed on your Chevrolet 3B. Match the full part application, drum dimensions and shoe width, then review required hardware and supplied pieces. Shared Chevrolet coverage still needs an exact component match for the chassis being serviced.

Flywheels and Clutch Release

A steel flywheel is worth comparing for a compatible street-driven clutch build where manageable takeoff matters. McLeod’s listed 153-tooth and 168-tooth options fit different complete combinations. Choose the engine’s crankshaft flange and balance arrangement first, then coordinate the clutch pattern, starter and bellhousing instead of changing ring-gear size in isolation.

Engine-Build Components

For an engine-build project, compare the exact Edelbrock Pro-Flo 4 injection or King rod-bearing part number with your engine and measured assembly. Plan fuel delivery, ignition, controls and any machining with the manufacturer documentation and your builder. Review each component as part of the complete installation.

Adjustable McLeod Release-Bearing Setup

The listed McLeod 16505 release bearing has an adjustable installed-height arrangement for its supported GM clutch application. Choose the setting using the current instructions supplied with the exact bearing and the measured clutch, fork and bellhousing geometry. Use the specified operating clearance for the installed assembly.

A bearing-length choice addresses clutch release, while the flywheel and clutch determine separate friction and rotating-assembly interfaces. Plan them together with the installer and check the surrounding pilot support and linkage during the job.

Choose Your Part

• Identify chassis, production year and current engine or gearbox.
• Choose drum-brake service or a defined drivetrain project.
• Match measured assembly details, complete applications and package contents.

Frequently Asked Questions

What should I inspect when renewing drum brakes?

Review the drum condition and dimensions, shoe wear, adjusters, springs and wheel-cylinder condition. Choose the components needed for the actual axle, and have the assembly serviced and adjusted to its specifications. A shoe replacement should address the surrounding worn or leaking parts too.

Are service shoes supplied with every drum?

Check each reference’s contents and choose separately required shoes or hardware as needed.

Why compare a steel flywheel for a street build?

McLeod describes its steel flywheels as suitable for street use where easy takeoff is desired. Choose the exact engine balance, crankshaft mounting and compatible clutch package first. A street-oriented material choice does not make different tooth counts or bolt patterns interchangeable.

Is the adjustable release bearing pre-set for my clutch?

Have the installer establish the exact release geometry, adjustment and clearance for the complete setup.

How do I choose a fuel-injection kit for my Chevrolet 3B?

Require the exact manufacturer part-number application and complete supporting-system plan before selection.

Related Collections

Explore engine components, or ask our team about your Chevrolet 3B service references.