Chevrolet 3D Parts & Accessories

Explore Chevrolet 3D parts for clutch planning, drum-brake service and engine projects at Black Ops Auto Works. Review McLeod flywheel choices alongside DFC brake and supporting engine-build references. Match the current chassis, engine and transmission before comparing package contents.

Clutch and Flywheel Project Choices

For a Chevrolet 3D manual-drivetrain project, compare the listed McLeod steel flywheels as street-oriented rotating-assembly components. A 153-tooth choice and a 168-tooth choice need their own compatible starter, bellhousing and clutch arrangement. Match crankshaft flange and balance before comparing package price, particularly when the engine or gearbox has been changed.

Drum-Brake Maintenance

For drum-brake service, compare DFC drums and shoes with the axle and brake assembly installed on your Chevrolet 3D. Match complete production coverage, drum dimensions and shoe width, then review hardware and package contents. Plan the service around the exact components being replaced.

Engine Assembly and Injection References

King rod bearings require measured crankshaft and connecting-rod specifications. The Edelbrock Pro-Flo 4 reference needs exact engine and complete installation coverage. Have the builder resolve the full manufacturer part number and system requirements before selecting either for a converted or rebuilt drivetrain.

Adjustable McLeod Release-Bearing Setup

The listed McLeod 16505 release bearing has an adjustable installed-height arrangement for its supported GM clutch application. Choose the setting using the current instructions supplied with the exact bearing and the measured clutch, fork and bellhousing geometry. Use the specified operating clearance for the installed assembly.

A bearing-length choice addresses clutch release, while the flywheel and clutch determine separate friction and rotating-assembly interfaces. Plan them together with the installer and check the surrounding pilot support and linkage during the job.

Choose Your Part

• Record chassis production and the installed engine and gearbox.
• Choose the clutch, brake or engine project being completed.
• Match complete application, measured dimensions and installation contents.

Frequently Asked Questions

What should I plan before a flywheel replacement?

Record the installed engine, crank flange and balance, clutch pattern, starter and bellhousing. Inspect the clutch and release components while accessible, and review the flywheel manufacturer’s installation procedure. This lets the order cover the complete job rather than only the ring gear.

Can the flywheel tooth count be changed independently?

Review the full compatible starter, bellhousing, clutch and engine combination with your installer.

Why compare a steel flywheel for a street build?

McLeod describes its steel flywheels as suitable for street use where easy takeoff is desired. Choose the exact engine balance, crankshaft mounting and compatible clutch package first. A street-oriented material choice does not make different tooth counts or bolt patterns interchangeable.

What determines rod-bearing size?

The engine builder’s measured assembly and required clearance determine the exact bearing specification.

Is the injection listing a guaranteed complete conversion?

Review exact engine coverage, supplied components and separately required fuel, ignition, controls and installation work.

Related Collections

Explore engine components, or ask our team about your Chevrolet 3D project.