Dodge A108 Van Parts & Accessories

Explore Dodge A108 Van parts references for brake restoration and mechanical service at Black Ops Auto Works. Review DFC drum-brake and hydraulic components alongside ignition, ring and steering-service references. Plan a focused repair order around the van’s actual assemblies and engine.

Drum Brake Restoration

Plan friction, hydraulic and hardware work as separate parts of one brake restoration. Shoes contact the drum; wheel cylinders apply the shoes; springs and adjusters support release and running clearance. The DFC selection lists those functions alongside hoses and a master cylinder. Inspect each assembly to decide whether the repair needs hardware alone or hydraulic and friction components as well. Match the exact A108 axle, side and installed drum dimensions before selecting the service pieces.

Engine and Steering-Service Details

Choose the prescribed NGK plug for the installed engine when planning ignition service. A ring set is a different, measured rebuild purchase: the MAHLE Chrysler 225 reference and Wiseco shelf-size references require the actual engine, piston grooves and finished bores. A bore-size label does not identify every ring-pack dimension or establish compatibility with the pistons already fitted.

Steering Stabilizers and the Cause of Movement

A steering damper addresses its specified steering-motion control. It does not replace a worn ball joint, loose linkage, damaged mount or tire defect. Diagnose the steering system before adding a damper, then match the exact A108 mounting points and required travel.

KYB van references and the separate Skyjacker listings can identify different chassis and mounting arrangements. Check the complete manufacturer application for the actual van; another vehicle title or a similar-looking damper is not a fitment confirmation.

Axle Components and a Focused Repair Plan

The Dana cover and Eaton helical limited-slip references belong to their stated axle configurations. A cover protects/seals its supported housing, while a limited-slip unit changes traction behavior inside the differential. Select the actual axle and required function before adding either to a restoration plan.

For the brake order, record assembly identifiers and inspect left/right adjusters and hydraulic connections. For an engine build, use the builder’s measurements. Keeping those service scopes clear helps identify the companion seals, fasteners and tools needed for the work instead of combining unrelated catalog references.

Choose Your Part

• Choose brake restoration or a specific mechanical service.
• Identify the actual engine, brake assemblies and chassis equipment.
• Review complete application, position and supplied repair pieces.

Frequently Asked Questions

Does a drum-brake hardware kit supply a full hydraulic repair?

It supplies the listed hardware. Wheel cylinders, hoses, master-cylinder parts, shoes and drums have separate functions and contents. Choose those from inspection and explicit A108 assembly coverage.

Are left and right brake adjusters interchangeable?

Select the specified side and assembly; review exact component orientation and application.

Can piston rings be selected from bore diameter alone?

Match the finished bore, piston design, ring-groove widths and specified ring-pack dimensions. Identify the actual engine and use the builder’s measurements and ring-maker installation requirements.

Will a steering stabilizer correct worn steering parts?

A stabilizer damps its specified movement. It does not renew worn linkage, joints, mounts or tires. Diagnose the cause, then choose the supported A108 damper and mounting/travel arrangement.

What helps review an A108 service order?

Provide the build details, actual engine and assembly references and the repair planned through our contact page.

Related Collections

Ask our team about A108 Van brake and restoration references.