Ferrari 348 TS Parts & Accessories

Ferrari 348 TS Parts & Accessories

The Ferrari 348 TS is the Targa-roof variant of the original transversale 348 platform, pairing the removable hardtop panel Targa format with the 3.4-liter transverse V8 and the same longitudinal transversale drivetrain as the 348 TB berlinetta. The TS designation refers to both the Targa body style and the transversale engine orientation, distinguishing it from the later 348 GTS which used the revised longitudinal layout. Owners maintaining a 348 TS need parts that match the original transversale chassis specification, particularly for anything related to engine and gearbox mounting, cooling system routing, and suspension geometry, since the TS and GTS differ in these critical mechanical details despite sharing the same body style. The 348 TS provides open-air V8 Ferrari motoring in a form that remains engaging and rewarding when properly maintained with correctly specified parts.

Popular Upgrades

Timing belt replacement kits with water pump, tensioner, and cam cover gaskets are the essential major service items for the 348 TS's 3.4-liter interference V8 regardless of drivetrain layout. Bosch Motronic fuel injection components including fuel pressure regulators, idle speed controllers, and throttle position sensors address running quality issues that develop as injection system components age. Targa roof panel seals, B-pillar rubber hardware, and storage area liners are the most commonly replaced TS-specific body items for cars that have been in open-air service for three decades. Suspension bushings, rebuilt shock absorbers, brake caliper rebuild kits, and Ferodo friction materials support the chassis maintenance that keeps the 348 TS handling safely at its performance level.

Performance and Handling

The 348 TS shares the same transversale drivetrain handling characteristics as the 348 TB, with the Targa body adding modest weight through additional structural reinforcement of the open section. The platform's sensitivity to tire condition, suspension wear, and alignment accuracy applies equally to the TS, and maintaining correct geometry is essential for predictable handling behavior from this mid-engine chassis. Refreshing worn suspension bushings and dampers improves both steering feel and cornering confidence significantly, since the geometric accuracy of the double-wishbone suspension depends on tight bushings to deliver the handling response Ferrari intended. Open-top driving amplifies the V8's character in the cockpit, making the TS one of the more sensory-rich driving experiences among 348 variants.

What is the difference between the Ferrari 348 TS and the 348 GTS?

The 348 TS uses the original transversale drivetrain layout where the engine crankshaft axis runs across the car, the same arrangement as the 348 TB berlinetta produced from 1989. The 348 GTS introduced the revised longitudinal drivetrain orientation with the engine crankshaft running front to back and a rear transaxle, which improved handling balance by revising the polar moment of inertia and weight distribution. Mechanical components related to the drivetrain mounting, engine orientation, and revised suspension geometry are different between TS and GTS models, so confirming which variant you own is essential before sourcing chassis or drivetrain parts.

What Targa-specific maintenance does the 348 TS require?

The removable roof panel on the 348 TS relies on a rubber perimeter seal that compresses and hardens with age, and replacing this seal when it begins to leak or crack prevents water from entering the cockpit and the storage area behind the seats. The latching mechanisms at the panel's front and rear edges should be inspected and lubricated periodically, since worn or misadjusted latches allow panel movement at speed that creates noise and can eventually damage the seal contact surface. Keeping the Targa storage area drain channels clear of debris prevents water accumulation that leads to interior dampness and eventual trim damage on cars kept outdoors.

Why These Parts Fit Right

Parts in this collection are cataloged for the Ferrari 348 TS's transversale drivetrain configuration and Targa body structure, with fitment notes that distinguish TS-specific items from those shared with the later longitudinal GTS. Compatibility information helps owners confirm the right part before purchasing. Orders ship quickly from stocked inventory to keep your service work on schedule.

Explore exhaust upgrades in our exhaust collection, source suspension refresh parts from our suspension collection, and find intake maintenance components in our air intake systems collection.