Suspension Arm Bushings

Control Arm Bushings

Restore precise wheel location

Control arm bushings locate the arm while allowing the movement needed for suspension travel. Fresh bushings can reduce clunks, wandering and unwanted alignment changes caused by cracked or separated factory rubber.

Trailing and Radius Arm Bushings

Support rear and longitudinal loads

Trailing arm and radius arm bushings control fore-and-aft movement under braking, acceleration and bumps. The correct kit depends on the exact arm design, chassis mount, sleeve size and whether the vehicle uses a pressed-in or bolt-in bushing.

Polyurethane, Delrin and Rubber

Choose the right material

Rubber generally favors isolation and a factory-style ride. Polyurethane reduces deflection for a firmer response, while Delrin and spherical-style solutions are typically chosen for more dedicated performance builds that accept additional noise and vibration.

Installation and Alignment

Press work and final setup

Many arm bushings require a press, proper support of the arm and cleaning of the bushing bore. Final-tightening procedures and alignment requirements vary by platform, so use the application instructions and schedule an alignment after suspension work.

Top Suspension Arm Bushings Brands

• SuperPro. A recognized option for compatible suspension, chassis or driveline upgrades in this category.
• Whiteline. A recognized option for compatible suspension, chassis or driveline upgrades in this category.
• Prothane. A recognized option for compatible suspension, chassis or driveline upgrades in this category.
• Energy Suspension. A recognized option for compatible suspension, chassis or driveline upgrades in this category.
• SPL Parts. A recognized option for compatible suspension, chassis or driveline upgrades in this category.
• BMR Suspension. A recognized option for compatible suspension, chassis or driveline upgrades in this category.
• Detroit Speed. A recognized option for compatible suspension, chassis or driveline upgrades in this category.
• Fabtech. A recognized option for compatible suspension, chassis or driveline upgrades in this category.
• Moog. A recognized option for compatible suspension, chassis or driveline upgrades in this category.
• Daystar. A recognized option for compatible suspension, chassis or driveline upgrades in this category.
• ACDelco. A recognized option for compatible suspension, chassis or driveline upgrades in this category.
• Mevotech. A recognized option for compatible suspension, chassis or driveline upgrades in this category.
• Powerflex. A recognized option for compatible suspension, chassis or driveline upgrades in this category.
• Voodoo13. A recognized option for compatible suspension, chassis or driveline upgrades in this category.
• Megan Racing. A recognized option for compatible suspension, chassis or driveline upgrades in this category.

How to Choose the Correct Suspension Arm Bushings

• Confirm the exact vehicle, axle and suspension position.
• Identify whether the bushing is front, rear, upper, lower, inner or outer.
• Match the bushing to the factory arm or an aftermarket arm.
• Choose rubber for a quieter factory-style street build.
• Choose polyurethane for reduced deflection and a firmer response.
• Confirm whether sleeves, grease and hardware are included.
• Check whether a press or special removal tool is required.
• Replace paired bushings when wear is comparable on both sides.
• Plan an alignment after control arm or trailing arm work.
• Use the fitment filters before ordering a complete kit.

Common Questions

What are symptoms of worn suspension arm bushings?

Common symptoms include clunks over bumps, vague steering, uneven tire wear and movement that changes alignment under braking or acceleration.

Are polyurethane bushings better than rubber?

Polyurethane can reduce deflection and sharpen response, while rubber typically provides more isolation and a quieter factory-style ride.

Do control arm bushings need to be pressed in?

Many applications use pressed-in bushings, although installation methods depend on the vehicle and the replacement design.

Should I replace both sides at once?

Replacing matched left and right bushings together is often practical when both have similar mileage and wear.

Will bushings affect alignment?

Yes. Worn bushings can allow unwanted movement, and replacing control arm bushings commonly requires an alignment check.

What is a trailing arm bushing?

A trailing arm bushing supports the arm that controls wheel movement in the longitudinal direction, especially at the rear suspension.

What is a radius arm bushing?

A radius arm bushing locates a radius arm used on certain truck and SUV suspension designs to manage fore-and-aft loads.

Do polyurethane bushings need grease?

Many polyurethane designs use a compatible lubricant during installation. Follow the manufacturer instructions for the specific kit.

Can I install bushings without removing the arm?

Some designs allow in-place service, but many require arm removal for safe access and correct bushing installation.

Are Delrin bushings street friendly?

Delrin bushings are typically selected for precise performance use and may transmit more noise and vibration than rubber or polyurethane.

Why Buy Suspension Arm Bushings from Black Ops Auto Works

Black Ops Auto Works stocks 162 Suspension Arm Bushings SKUs across Mustang, Camaro, Silverado, F-150, WRX and other car, truck and SUV applications with real fitment data, competitive pricing and support from staff who build these vehicles themselves. Products are filterable by year, make, model, trim, engine and drivetrain to confirm the correct application before ordering.

For focused shopping, browse our bushing kits, full vehicle bushings, suspension arms and components, control arms, sway bars and bushings, Prothane, Energy Suspension, Whiteline.