Exhaust Hangers, Isolators, Rods & Support Hardware

Shop exhaust isolators, hanger rods, weld-on supports and spring hardware at Black Ops Auto Works. Compare Kartboy, Cusco, Ticon, Stainless Bros/Works, Turbo XS, OMIX and other listed references. Support the actual exhaust layout while preserving the movement and clearance required by the system.

Isolator Holes, Spacing and Length

Kartboy references distinguish hole diameters and standard/long arrangements. Cusco bushings additionally identify hole-to-hole spacing and thickness. Measure the retained hanger rods and desired supported position, not just the hole diameter.

Ticon three-hole, Turbo XS two-position and BLOX four-hole references offer different positioning arrangements. Match their mounting points and clearance with the exhaust at the intended installed position. A harder isolator is not automatically the right solution for a misaligned system.

Weld-On Rods and Custom Supports

Ticon titanium rods and Stainless Bros rod references distinguish diameter, length, solid/hollow construction and end form. Match the rod to the selected isolator and the fabricator’s material/joining plan.

Stainless Works weld-on hanger references and a separate grommet supply different parts of a support assembly. Review what is included and how it fits the exhaust pipe or mounting point. Plan support near the actual loads without locking out required movement.

Hooks, Springs and Vehicle-Specific Service

The Stainless Bros slip-joint hook/tension-spring pack connects its supported joint arrangement. It is separate from a rubber/polyurethane isolator hanging the exhaust from the body. Choose the required function before comparing dimensions.

OMIX YJ, universal and swivel references have their own mounting layouts. Kartboy’s Volkswagen kit also has its specified application. Universal support pieces still need a measured installation and proper exhaust clearance.

Other Listed Parts and Final Checks

An ISR Miata Circuit Spec exhaust and Akrapovic Porsche titanium-lip reference also appear here. They supply their named system or trim component rather than an ordinary replacement hanger. Review their separate application and contents.

Inspect worn isolators, rods, brackets and flange alignment during service. Check clearance to the body, shields, suspension and drivetrain through required movement, then follow the exact installation and inspection procedure. A new hanger does not resolve every resonance or exhaust leak.

Choose Your Part

• Choose isolator, weld-on rod/support, hook/spring pack or separate listed component.
• Measure rod/hole diameters, spacing, length and supported position.
• Match mounting and fabrication material/connection requirements.
• Inspect alignment, thermal movement and operating clearance.

Frequently Asked Questions

How should I measure an exhaust isolator?

Compare rod/hole diameter, center-to-center spacing, length/thickness and available clearance in the supported position.

Does a longer Kartboy reference perform the same positioning job?

Length changes the supported location. Match the specific arrangement needed rather than substituting from hole diameter alone.

Are slip-joint springs the same as body-hanger bushings?

No. They retain their supported joint arrangement; an isolator supports the exhaust at its mounting location.

What should a fabricator check on a hanger rod?

Match diameter, length, end form, material and joining process with the isolator and complete support plan.

Will a stiffer hanger cure every rattle?

No. Inspect alignment, clearances, brackets and the rest of the system before selecting the required repair.

What does universal hanger mean?

It supplies its stated dimensions and function for a planned installation. It still needs matching mounting points, clearance and fabrication requirements.

Related Collections

Exhaust Components · Exhaust Hardware · Exhaust Adapters · Clamps