Match an aftermarket wheel’s center bore to the vehicle’s hub pilot with hubcentric rings from Black Ops Auto Works. Compare SSR plastic, Rays aluminum and other current wheel-centering references by both diameters and the exact wheel interface. Choose the dimensions first, then compare material and package quantity.
Read Outside and Inside Diameter Correctly
The ring’s outside diameter matches the wheel center bore; its inside diameter matches the vehicle hub pilot. An SSR 73.0-to-67.1 pair therefore centers a compatible 73.0 mm wheel bore on a 67.1 mm hub. Do not reverse those measurements or round a specified dimension to the nearest whole number.
The selection includes different SSR pairs and a Rays 75-to-64.1 aluminum reference. Match the actual depth, profile and wheel requirements as well as the two nominal diameters. A ring cannot make a wheel with an undersized center bore fit a larger hub.
Centering Is Separate from Wheel Fastening
A correctly specified ring helps locate the wheel concentrically during mounting. It does not change bolt pattern, offset or lug-seat requirements. Wheel hardware still needs the exact thread, seat and engagement required by the wheel and hub.
Compare single rings, pairs and other package quantities against the number of wheels being installed. Follow the wheel manufacturer’s material and installation guidance. If vibration is present, inspect balance, wheel condition, mounting surfaces and fastening rather than treating a ring as a guaranteed cure.
Choose Your Part
- Measure wheel center bore and hub pilot without rounding.
- Match ring outside/inside diameter, profile and wheel requirements.
- Count required rings and confirm the complete wheel/hardware setup.
Frequently Asked Questions
Which ring diameter matches the wheel?
The outside diameter matches the wheel center bore. The inside diameter matches the vehicle hub pilot. Match both exactly.
Will hub rings change a bolt pattern?
No. They center a compatible wheel on the hub pilot. Bolt pattern, offset and fastening remain separate requirements.
Should I choose plastic or aluminum rings?
Use the wheel manufacturer’s specified material and profile for the intended application. Correct dimensions and seating matter before appearance or material preference.
Will rings fix every wheel vibration?
No. Incorrect centering is only one possible cause. Balance, damaged components, mounting surfaces and wheel fastening also need inspection.
Related Collections
Wheels · Wheel Spacers & Adapters · Ask Our Team