Explore Fittings at Black Ops Auto Works. Match both connection interfaces and the intended system. Check dimensions, thread or flange specifications, material compatibility and the quantity supplied before ordering.
- Both connection interfaces checked
- Dimensions, threads and materials
- System compatibility and quantity
Questions about Fittings? Ask our team before ordering or call (855) 221-9728.
Shop hose ends, AN adapters, ORB and metric fittings, banjo connections, bulkheads and specialty plumbing hardware at Black Ops Auto Works. Compare Vibrant, Radium Engineering, Fragola, DeatschWerks, Aeromotive and other listed options for a coordinated fuel, oil, cooling or air-system project. Build the connection around both mating interfaces and the operating requirements of the system.
Identify the Connection and Sealing Method
AN flare, O-ring boss, tapered pipe thread, metric washer-sealed and quick-connect interfaces work differently. Identify each end of an adapter separately: an ORB-to-AN fitting connects a boss port to a flare connection, while a metric adapter may require the specified sealing washer.
Compare thread size and pitch, male/female arrangement, seat shape and seal requirements. A thread that starts to engage does not establish the correct sealing connection. Use the specified lubricant, sealant and tightening procedure for the exact part; do not apply pipe-thread practices to every interface.
Hose Ends Matched to the Hose Series
Choose hose ends for the exact hose construction and manufacturer series. The range includes PTFE, CPE, crimp, reusable and other termination arrangements. A fitting’s dash size describes only part of the connection and does not establish compatibility with every same-size hose.
For ethanol blends or other fuels, compare the explicit compatibility of the hose, fittings and seals together. PTFE is one available approach, but fuel compatibility is product-specific rather than a rule that every non-PTFE hose is unsuitable. Size the system from its flow and pressure requirements instead of a universal horsepower threshold.
Route Lines With the Right Angle and Adapter
Straight and angled hose ends, reducers, tees, Y-adapters and bulkheads help plan routing and service access. Compare angle, installed length, bore and wrench clearance. A bulkhead fitting also needs a suitable panel and the correct retaining arrangement.
Swivel and adjustable fittings can help orient an assembly, but their construction and permitted movement vary. Set and tighten the connection according to its instructions; do not treat every swivel hose end as a continuously rotating joint. Check bend radius and avoid placing the hose under twist or tension.
Specialty Connections and System-Specific Hardware
Radium and Fleece quick-connect references, Snow Performance water-methanol fittings, Firestone or Air Lift pneumatic fittings, and Nitrous Express hardware serve different systems. Match the medium, pressure range, seal and mating hardware before combining them. A pneumatic push-to-connect piece is not automatically a fuel-line fitting.
Banjo fittings require the correct bolt, passage and sealing arrangement. Weld fittings need the proper material and fabrication process. The selection also includes clamps, line separators and electrical connector references; choose those by their own function rather than treating every item as a fluid adapter.
Plan the Complete Plumbing Order
List ports, hose series, lengths, adapters, O-rings, washers, clamps and mounting supports before assembly. For a serviceable installation, leave appropriate access to filters, regulators, sensors and other components. Review package contents so an adapter or hose end is not mistaken for a complete line kit.
Use the manufacturer’s installation and inspection procedure for the system. If you need help comparing parts, send our team the component port specifications, hose reference and intended fluid or air circuit.
Choose Your Part
- Identify both mating interfaces, thread standards and sealing methods.
- Match hose ends to the exact hose construction and series.
- Compare angle, bore, clearance and fluid/pressure/temperature compatibility.
- Include required seals, retention hardware, supports and assembly tools.
Frequently Asked Questions
Are AN flare and ORB connections interchangeable?
They use different sealing arrangements. A flare connection seals at its mating seat, while an ORB connection uses an O-ring at the specified port. Select the correct adapter rather than relying on dash size alone.
Can I mix any fitting brand with any hose?
Hose-end compatibility depends on the exact hose and termination system. Use manufacturer-supported combinations; a common dash size alone is insufficient.
Does E85 always require PTFE hose?
Choose a hose, fitting and seal combination explicitly compatible with the fuel. Some manufacturers also offer ethanol-compatible non-PTFE hose. Compatibility must be established for the specific products and operating conditions.
What size fitting does my fuel system need?
Use the complete system’s flow, pressure, fuel and routing requirements along with the component port specifications. There is no universal fitting size determined by horsepower alone.
Can a swivel hose end rotate continuously after installation?
Do not assume that capability. Many swivel features help orient a connection during assembly; check the exact fitting’s permitted movement and installation instructions.
Do all fittings use thread sealant?
No. Flare seats, O-rings, sealing washers and tapered threads require different assembly methods. Follow the exact manufacturer procedure and keep inappropriate sealant away from the sealing interface.
Does matching the thread prove a fitting is safe for brake or fuel service?
The complete connection must be approved for the intended fluid, pressure, temperature and sealing arrangement. A physically similar thread does not establish system suitability.
Related Collections
Recently Viewed Products
Military & First Responders
A program for military members and first responders, with dedicated verification and support for your next build.


