Restore rear sway bar geometry while preserving suspension droop
King Shocks 21047-104 replaces the factory rear sway bar links on 2022 and newer Toyota Tundra trucks with stronger billet links that are 25 percent longer than stock. The revised length helps correct the sway bar angle and allows the rear suspension to use its available droop.
Key Features
- Exact 21047-104 rear link configuration
- 25 percent longer than the original rear links
- CNC machined from 6061-T6 aluminum
- Direct-replacement bolt-on design
- Improves strength for demanding on-road and off-road use
- Designed to improve rear sway bar angle and stability
- Supplied as a matched rear link kit
Fitment
| Years |
Make |
Model |
Position |
Verified Notes and Exclusions |
| 2022-2026 |
Toyota |
Tundra |
Rear |
Use 21047-104 only as a rear sway bar link kit; verify the vehicle still uses the compatible factory-style rear sway bar mounting points. Sequoia fitment is not included without manufacturer confirmation. |
Specifications
| Detail |
Value |
| Manufacturer Part Number |
21047-104 |
| Product Type |
Rear sway bar link kit |
| Material |
6061-T6 aluminum |
| Manufacturing |
CNC machined |
| Length Change |
25 percent longer than stock |
| Position |
Rear |
| Installation Type |
Direct replacement |
| Quantity |
One matched rear link kit |
What's Included
- One King Shocks 21047-104 rear sway bar billet link kit
- Two billet rear sway bar links as depicted in the verified exact-product image
- Only the components in the sealed manufacturer package are included; installation tools and replacement sway bar hardware are not added unless supplied by King
About King Shocks
King Shocks develops rebuildable off-road dampers and precision suspension components. Its billet link products use vehicle-specific geometry and machined aluminum construction to complement suspension travel and handling upgrades.
Related Parts
- King rear shocks specified for the same Tundra suspension configuration
- Factory-equivalent rear sway bar mounting hardware when inspection shows replacement is necessary
- Rear suspension components selected for the vehicle's verified model year and installed ride height
FAQ
What is the 21047-104?It is a rear billet sway bar link kit for 2022 and newer Toyota Tundra trucks.
What vehicles does this kit fit?Verified fitment is limited to 2022 and newer Toyota Tundra models. No Sequoia application is claimed here because the exact manufacturer listing was not available to confirm it.
Where do these links install?They replace the rear sway bar end links.
How much longer are they than stock?King specifies that the links are 25 percent longer than the factory links to correct the rear sway bar angle and permit additional droop.
What are the links made from?The links are CNC machined from 6061-T6 aluminum.
Is this a bolt-on installation?Yes. The kit is designed as a direct replacement, but the vehicle must be safely supported and the sway bar should be unloaded before removing the original links.
Are these intended for the front sway bar?No. The verified application is rear only.
Should the suspension be checked after installation?Yes. Cycle the rear suspension to verify sway bar angle, link articulation, fastener clearance, and full droop before driving.
Installation Instructions
- Park on a level surface, chock the wheels, and support the rear of the truck with appropriately rated equipment.
- Inspect the rear sway bar, mounting points, and surrounding suspension components before removing the factory links.
- Unload the sway bar and remove the original rear end links without allowing the bar or suspension to shift unexpectedly.
- Install the billet links in the same rear mounting positions and orient the joints so they can articulate without binding.
- Tighten all fasteners to the applicable King or Toyota service specifications.
- Cycle the rear suspension through compression and droop to confirm link articulation, sway bar angle, brake-line clearance, and contact-free movement.
- Road-test at low speed, listen for contact or looseness, and recheck the mounting hardware after the initial driving interval.
California Proposition 65 Warning: Motor vehicle parts can expose you to chemicals known to the State of California to cause cancer and reproductive harm. Wash hands after handling and follow applicable safety procedures.
