-15%
Click to zoom in
This BBK air-intake component is designed for the exact vehicle or component configuration identified on this page. Review the verified fitment or universal interface, specifications, included parts, and installation requirements before ordering.
Key Features
- Graphite Coated High-Temperature Facing Material.
Fitment
| Years | Make | Model | Application |
|---|---|---|---|
| 1994-1995 | Ford | Mustang | GT |
| 1995 | Ford | Mustang | GTS |
| 1994-1995 | Ford | Mustang | SVT Cobra |
Specifications
| Manufacturer | BBK |
|---|---|
| Manufacturer Part Number | 1605 |
| Product Type | Air Intake Components |
| Diameter or Bore | 70mm Throttle Body, 75mm throttle body, 65mm, 70mm |
| Thread or Fitting | 1994-1995, 0 65, 1989-1995, 1989-95 |
| Engine or Platform Requirement | 5.0L, 3.8L, V6 |
| Fitment Type | Vehicle specific, verify the complete application |
What's Included
One new BBK product identified by manufacturer part number 1605. Gaskets, fasteners, wiring, sensors, fittings, clamps, filters, fluids, tuning, and companion components are included only when expressly stated for this exact part number.
About BBK
BBK develops intake, throttle-body, exhaust, fuel, oil-separation, and chassis products for domestic performance vehicles. Product selection remains exact-application and exact-part-number specific.
Related BBK Products
- BBK 1986-1993 Mustang 5.0 65 70mm Throttle Body Gasket Kit
- 1986-1993 Mustang 5.0 75mm Throttle Body Gasket Kit BBK
- 1994-1995 Mustang 5.0 Cold Air Intake Kit - Blackout Finish
Browse the BBK collection for related airflow, exhaust, fuel, and chassis components.
Frequently Asked Questions
Will this BBK air-intake component fit my 1994-1995 Ford Mustang GT?
That application is listed, but confirm the engine in Specifications, transmission, drivetrain, body style, emissions equipment, production split, and every BBK note before ordering.
Does this intake require tuning?
Requirements vary by exact application, airflow design, mass-airflow housing, and other modifications. Follow the current BBK guidance for this part number.
How should the filter be serviced?
Use only the cleaning and oiling procedure approved for the included filter media. Over-oiling can contaminate some airflow sensors.
Installation Instructions
Follow the current BBK instructions and vehicle service information for this exact part number. Confirm the application, interfaces, tools, hardware, fluids, torque values, wiring, clearances, emissions equipment, calibration, leak checks, and startup procedure before returning the vehicle to service. Professional installation is recommended for fuel, exhaust, suspension, drivetrain, or electronic throttle work.
Air Intake Components
Air intake components and accessories for Jeep, RAM, Subaru, Ford, GM, Honda, VW, Mitsubishi, and Hyundai vehicles are stocked at Black Ops Auto Works. Shop induction hoses, intake couplers and clamps, charge pipes, intake horns, MAF sensor fittings and harness extensions, sound suppression parts, snorkels, and intake hardware kits that support a complete cold air intake or factory airbox setup. Every product is filterable by year, make, model, trim, engine, and drivetrain so the correct part ships the first time. Black Ops Auto Works carries 279 air intake component SKUs across hardware, hoses, sensors, and specialty accessories. What This Category Covers The Air Intake Components collection covers the supporting hardware, hoses, sensors, and small parts that complete or service an intake system, separate from full intake kits sold as complete assemblies. This includes replacement clamps, induction hoses, MAF sensor fittings, charge pipes, intake horns for diesel trucks, snorke...
View Air Intake Components Products
Air Intake Systems
Shop cold air intakes, short ram intakes, enclosed air boxes, intake tubes, mass air flow sensors, snorkels, scoops, silicone couplers, replacement filters, and intake service components at Black Ops Auto Works. This collection covers complete vehicle-specific intake systems and supporting components for performance cars, trucks, SUVs, Jeeps, diesel vehicles, off-road builds, and custom fabrication projects. Performance Air Intake Systems and Components An engine air intake system filters incoming air and delivers it to the throttle body, turbocharger, or supercharger inlet. Aftermarket systems may change the intake path, filter location, tubing size, air-box design, induction sound, and airflow characteristics. The results depend on the exact vehicle, engine calibration, intake design, installed modifications, and operating conditions. This collection includes products from Legmaker Intakes, aFe POWER, JLT, K&N, AIRAID, CORSA Performance, Injen, Spectre, Granatelli, Vibrant Per...
View Air Intake Systems Products
BBK
Shop BBK headers, exhaust systems, cold air intakes, throttle bodies, fuel-system components, oil separators, suspension parts, pulleys, sensors, wiring, and service hardware. Each product page identifies the verified vehicle application or exact universal interface. Airflow and Exhaust BBK intake, throttle-body, header, mid-pipe, and exhaust components are application specific. Match the complete vehicle, engine requirement, transmission, emissions configuration, factory equipment, pipe diameter, flange style, and companion components before ordering. Fuel, Chassis, and Service Components Fuel-system, oil-separation, suspension, wiring, sensor, pulley, gasket, and hardware products require exact part-number selection. Confirm every pressure, flow, thread, fitting, connector, mounting point, side, position, dimension, material, and quantity. How to Choose the Correct BBK Product Match the complete year, make, model, and listed application Confirm engine, transmission, drivetrain, b...
View BBK Products